[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZRuuvj3r1kBqc+EI@kuha.fi.intel.com>
Date: Tue, 3 Oct 2023 09:03:42 +0300
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Abdel Alkuor <alkuor@...il.com>
Cc: krzysztof.kozlowski+dt@...aro.org, bryan.odonoghue@...aro.org,
gregkh@...uxfoundation.org, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, ryan.eleceng@...il.com,
robh+dt@...nel.org, conor+dt@...nel.org,
devicetree@...r.kernel.org, Abdel Alkuor <abdelalkuor@...tab.com>
Subject: Re: [PATCH v9 06/14] USB: typec: tps6598x: Clear dead battery flag
On Sun, Oct 01, 2023 at 04:11:26AM -0400, Abdel Alkuor wrote:
> From: Abdel Alkuor <abdelalkuor@...tab.com>
>
> Dead battery flag must be cleared after switching tps25750 to APP mode
> so the PD controller becomes fully functional.
>
> Signed-off-by: Abdel Alkuor <abdelalkuor@...tab.com>
I'm sorry I noticed these so late, but this one really feels like it
should be part of the patch 4/14. Is there some reason why you do this
separately?
> ---
> Changes in v9:
> - No changes
> Changes in v8:
> - No changes
> Changes in v7:
> - Add driver name to commit subject
> Changes in v6:
> - No changes
> Changes in v5:
> - Incorporating tps25750 into tps6598x driver
>
> drivers/usb/typec/tipd/core.c | 16 ++++++++++++++++
> drivers/usb/typec/tipd/tps6598x.h | 1 +
> 2 files changed, 17 insertions(+)
>
> diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> index 21b0ea2c9627..2598433a69cf 100644
> --- a/drivers/usb/typec/tipd/core.c
> +++ b/drivers/usb/typec/tipd/core.c
> @@ -946,6 +946,22 @@ static int tps25750_apply_patch(struct tps6598x *tps)
>
> } while (ret != TPS_MODE_APP);
>
> + /*
> + * The dead battery flag may be triggered when the controller
> + * port is connected to a device that can source power and
> + * attempts to power up both the controller and the board it is on.
> + * To restore controller functionality, it is necessary to clear
> + * this flag
> + */
> + if (status & TPS_BOOT_STATUS_DEAD_BATTERY_FLAG) {
> + ret = tps6598x_exec_cmd(tps, "DBfg", 0, NULL, 0, NULL);
> + if (ret) {
> + dev_err(tps->dev,
> + "failed to clear dead battery %d\n", ret);
One line is enough.
> + return ret;
> + }
> + }
> +
> dev_info(tps->dev, "controller switched to \"APP\" mode\n");
>
> return 0;
> diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h
> index a80d0929f3ee..c000170f4547 100644
> --- a/drivers/usb/typec/tipd/tps6598x.h
> +++ b/drivers/usb/typec/tipd/tps6598x.h
> @@ -200,6 +200,7 @@
> #define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B (BIT(2) | BIT(1))
>
> /* BOOT STATUS REG*/
> +#define TPS_BOOT_STATUS_DEAD_BATTERY_FLAG BIT(2)
> #define TPS_BOOT_STATUS_I2C_EEPROM_PRESENT BIT(3)
>
> #endif /* __TPS6598X_H__ */
> --
> 2.34.1
Br,
--
heikki
Powered by blists - more mailing lists