[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9be14161-907e-92f6-d214-11df00693fac@oracle.com>
Date: Tue, 3 Oct 2023 11:56:52 +0100
From: John Garry <john.g.garry@...cle.com>
To: Dave Chinner <david@...morbit.com>
Cc: axboe@...nel.dk, kbusch@...nel.org, hch@....de, sagi@...mberg.me,
jejb@...ux.ibm.com, martin.petersen@...cle.com, djwong@...nel.org,
viro@...iv.linux.org.uk, brauner@...nel.org,
chandan.babu@...cle.com, dchinner@...hat.com,
linux-block@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-nvme@...ts.infradead.org, linux-xfs@...r.kernel.org,
linux-fsdevel@...r.kernel.org, tytso@....edu, jbongio@...gle.com,
linux-api@...r.kernel.org
Subject: Re: [PATCH 15/21] fs: xfs: Support atomic write for statx
On 03/10/2023 04:32, Dave Chinner wrote:
> On Fri, Sep 29, 2023 at 10:27:20AM +0000, John Garry wrote:
>> Support providing info on atomic write unit min and max for an inode.
>>
>> For simplicity, currently we limit the min at the FS block size, but a
>> lower limit could be supported in future.
>>
>> The atomic write unit min and max is limited by the guaranteed extent
>> alignment for the inode.
>>
>> Signed-off-by: John Garry <john.g.garry@...cle.com>
>> ---
>> fs/xfs/xfs_iops.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++
>> fs/xfs/xfs_iops.h | 4 ++++
>> 2 files changed, 55 insertions(+)
>>
>> diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
>> index 1c1e6171209d..5bff80748223 100644
>> --- a/fs/xfs/xfs_iops.c
>> +++ b/fs/xfs/xfs_iops.c
>> @@ -546,6 +546,46 @@ xfs_stat_blksize(
>> return PAGE_SIZE;
>> }
>>
>> +void xfs_ip_atomic_write_attr(struct xfs_inode *ip,
>> + xfs_filblks_t *unit_min_fsb,
>> + xfs_filblks_t *unit_max_fsb)
>
> Formatting.
Change args to 1x tab indent, right?
>
> Also, we don't use variable name shorthand for function names -
> xfs_get_atomic_write_hint(ip) to match xfs_get_extsz_hint(ip)
> would be appropriate, right?
Changing the name format would be ok. However we are not returning a
hint, but rather the inode atomic write unit min and max values in FS
blocks. Anyway, I'll look to rework the name.
>
>
>
>> +{
>> + xfs_extlen_t extsz_hint = xfs_get_extsz_hint(ip);
>> + struct xfs_buftarg *target = xfs_inode_buftarg(ip);
>> + struct block_device *bdev = target->bt_bdev;
>> + struct xfs_mount *mp = ip->i_mount;
>> + xfs_filblks_t atomic_write_unit_min,
>> + atomic_write_unit_max,
>> + align;
>> +
>> + atomic_write_unit_min = XFS_B_TO_FSB(mp,
>> + queue_atomic_write_unit_min_bytes(bdev->bd_queue));
>> + atomic_write_unit_max = XFS_B_TO_FSB(mp,
>> + queue_atomic_write_unit_max_bytes(bdev->bd_queue));
>
> These should be set in the buftarg at mount time, like we do with
> sector size masks. Then we don't need to convert them to fsbs on
> every single lookup.
ok, fine. However I do still have a doubt on whether these values should
be changeable - please see (small) comment about
atomic_write_max_sectors in patch 7/21
>
>> + /* for RT, unset extsize gives hint of 1 */
>> + /* for !RT, unset extsize gives hint of 0 */
>> + if (extsz_hint && (XFS_IS_REALTIME_INODE(ip) ||
>> + (ip->i_diflags2 & XFS_DIFLAG2_FORCEALIGN)))
>
> Logic is non-obvious. The compound is (rt || force), not
> (extsz && rt), so it took me a while to actually realise I read this
> incorrectly.
>
> if (extsz_hint &&
> (XFS_IS_REALTIME_INODE(ip) ||
> (ip->i_diflags2 & XFS_DIFLAG2_FORCEALIGN))) {
>
>> + align = extsz_hint;
>> + else
>> + align = 1;
>
> And now the logic looks wrong to me. We don't want to use extsz hint
> for RT inodes if force align is not set, this will always use it
> regardless of the fact it has nothing to do with force alignment.
extsz_hint comes from xfs_get_extsz_hint(), which gives us the SB
extsize for the RT inode and this alignment is guaranteed, no?
>
> Indeed, if XFS_DIFLAG2_FORCEALIGN is not set, then shouldn't this
> always return min/max = 0 because atomic alignments are not in us on
> this inode?
As above, for RT I thought that extsize alignment was guaranteed and we
don't need to bother with XFS_DIFLAG2_FORCEALIGN there.
>
> i.e. the first thing this code should do is:
>
> *unit_min_fsb = 0;
> *unit_max_fsb = 0;
> if (!(ip->i_diflags2 & XFS_DIFLAG2_FORCEALIGN))
> return;
>
> Then we can check device support:
>
> if (!buftarg->bt_atomic_write_max)
> return;
>
> Then we can check for extent size hints. If that's not set:
>
> align = xfs_get_extsz_hint(ip);
> if (align <= 1) {
> unit_min_fsb = 1;
> unit_max_fsb = 1;
> return;
> }
>
> And finally, if there is an extent size hint, we can return that.
>
>> + if (atomic_write_unit_max == 0) {
>> + *unit_min_fsb = 0;
>> + *unit_max_fsb = 0;
>> + } else if (atomic_write_unit_min == 0) {
>> + *unit_min_fsb = 1;
>> + *unit_max_fsb = min_t(xfs_filblks_t, atomic_write_unit_max,
>> + align);
>
> Why is it valid for a device to have a zero minimum size?
It's not valid. Local variables atomic_write_unit_max and
atomic_write_unit_min unit here is FS blocks - maybe I should change names.
The idea is that for simplicity we won't support atomic writes for XFS
of size less than 1x FS block initially. So if the bdev has - for
example - queue_atomic_write_unit_min_bytes() == 2K and
queue_atomic_write_unit_max_bytes() == 64K, then (ignoring alignment) we
say that unit_min_fsb = 1 and unit_max_fsb = 16 (for 4K FS blocks).
> If it can
> set a maximum, it should -always- set a minimum size as logical
> sector size is a valid lower bound, yes?
>
>> + } else {
>> + *unit_min_fsb = min_t(xfs_filblks_t, atomic_write_unit_min,
>> + align);
>> + *unit_max_fsb = min_t(xfs_filblks_t, atomic_write_unit_max,
>> + align);
>> + }
>
> Nothing here guarantees the power-of-2 sizes that the RWF_ATOMIC
> user interface requires....
atomic_write_unit_min and atomic_write_unit_max will be powers-of-2 (or 0).
But, you are right, we don't check align is a power-of-2 - that can be
added.
>
> It also doesn't check that the extent size hint is aligned with
> atomic write units.
If we add a check for align being a power-of-2 and atomic_write_unit_min
and atomic_write_unit_max are already powers-of-2, then this can be
relied on, right?
>
> It also doesn't check either against stripe unit alignment....
As mentioned in earlier response, this could be enforced.
>
>> +}
>> +
>> STATIC int
>> xfs_vn_getattr(
>> struct mnt_idmap *idmap,
>> @@ -614,6 +654,17 @@ xfs_vn_getattr(
>> stat->dio_mem_align = bdev_dma_alignment(bdev) + 1;
>> stat->dio_offset_align = bdev_logical_block_size(bdev);
>> }
>> + if (request_mask & STATX_WRITE_ATOMIC) {
>> + xfs_filblks_t unit_min_fsb, unit_max_fsb;
>> +
>> + xfs_ip_atomic_write_attr(ip, &unit_min_fsb,
>> + &unit_max_fsb);
>> + stat->atomic_write_unit_min = XFS_FSB_TO_B(mp, unit_min_fsb);
>> + stat->atomic_write_unit_max = XFS_FSB_TO_B(mp, unit_max_fsb);
>
> That's just nasty. We pull byte units from the bdev, convert them to
> fsb to round them, then convert them back to byte counts. We should
> be doing all the work in one set of units....
ok, agreed. bytes is probably best.
>
>> + stat->attributes |= STATX_ATTR_WRITE_ATOMIC;
>> + stat->attributes_mask |= STATX_ATTR_WRITE_ATOMIC;
>> + stat->result_mask |= STATX_WRITE_ATOMIC;
>
> If the min/max are zero, then atomic writes are not supported on
> this inode, right? Why would we set any of the attributes or result
> mask to say it is supported on this file?
ok, we won't set STATX_ATTR_WRITE_ATOMIC for min/max are zero
Thanks,
John
Powered by blists - more mailing lists