[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231003113017.z3yyjscvvinwnyy7@putdown>
Date: Tue, 3 Oct 2023 06:30:17 -0500
From: Nishanth Menon <nm@...com>
To: Ayush Singh <ayushdevel1325@...il.com>
CC: <greybus-dev@...ts.linaro.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <gregkh@...uxfoundation.org>,
<vaishnav@...gleboard.org>, <jkridner@...gleboard.org>,
<krzysztof.kozlowski+dt@...aro.org>, <vigneshr@...com>,
<kristo@...nel.org>, <robh+dt@...nel.org>, <conor+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v6 1/3] dt-bindings: Add beaglecc1352
On 23:54-20231002, Ayush Singh wrote:
> Add DT bindings for BeaglePlay CC1352 co-processor.
>
> The BeaglePlay has a CC1352 co-processor. This co-processor is connected
> to the main AM62 (running Linux) over UART. In the BeagleConnect
> Technology, CC1352 is responsible for handling 6LoWPAN communication
> with beagleconnect freedom nodes as well as their discovery
>
> This commit adds net/ti,cc1352p7. It is used by gb-beagleplay greybus
> driver.
>
> Signed-off-by: Ayush Singh <ayushdevel1325@...il.com>
> ---
> .../devicetree/bindings/net/ti,cc1352p7.yaml | 48 +++++++++++++++++++
> MAINTAINERS | 6 +++
> 2 files changed, 54 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> new file mode 100644
> index 000000000000..57bc2c43e5b1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments Simplelink CC1352P7 wireless MCU
> +
> +description:
> + The cc1352p7 mcu can be connected via SPI or UART.
> +
> +maintainers:
> + - Ayush Singh <ayushdevel1325@...il.com>
> +
> +properties:
> + compatible:
> + const: ti,cc1352p7
> +
> + clocks:
> + maxItems: 2
I would suggest clock-names and description for it.
> +
> + reset-gpios:
> + maxItems: 1
> +
> + power-gpios:
> + maxItems: 3
> + description:
> + The device has three power rails that are exposed on external pins VDDS,
> + VDDR and DCOUPL.
Shouldn't these be regulators? The power rails are input to the MCU,
correct?
The properties should be something like:
vdds-supply
vddr-supply
dcoupl-supply ? (not sure what dcoupl is, but description should provide
that info).
the gpio controls for those can be modelled by regulator-gpio ?
> +
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + serial {
> + mcu {
> + compatible = "ti,cc1352p7";
> + clocks = <&sclk_hf 0>, <&sclk_lf 25>;
> + reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>;
> + power-gpios = <&pio 1 GPIO_ACTIVE_HIGH>, <&pio 2 GPIO_ACTIVE_HIGH>, <&pio 3 GPIO_ACTIVE_HIGH>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 37b9626ee654..5467669d7963 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8969,6 +8969,12 @@ F: drivers/staging/greybus/sdio.c
> F: drivers/staging/greybus/spi.c
> F: drivers/staging/greybus/spilib.c
>
> +GREYBUS BEAGLEPLAY DRIVERS
> +M: Ayush Singh <ayushdevel1325@...il.com>
> +L: greybus-dev@...ts.linaro.org (moderated for non-subscribers)
> +S: Maintained
> +F: Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> +
> GREYBUS SUBSYSTEM
> M: Johan Hovold <johan@...nel.org>
> M: Alex Elder <elder@...nel.org>
> --
> 2.41.0
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Powered by blists - more mailing lists