[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231004090449.256229-5-quic_devipriy@quicinc.com>
Date: Wed, 4 Oct 2023 14:34:49 +0530
From: Devi Priya <quic_devipriy@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <lee@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<thierry.reding@...il.com>, <ndesaulniers@...gle.com>,
<trix@...hat.com>, <baruch@...s.co.il>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <llvm@...ts.linux.dev>
Subject: [PATCH V13 4/4] arm64: dts: ipq6018: add pwm node
Describe the PWM block on IPQ6018.
The PWM is in the TCSR area. Make &tcsr "simple-mfd" compatible, and add
&pwm as child of &tcsr.
Add also ipq6018 specific compatible string.
Co-developed-by: Baruch Siach <baruch.siach@...lu.com>
Signed-off-by: Baruch Siach <baruch.siach@...lu.com>
Signed-off-by: Devi Priya <quic_devipriy@...cinc.com>
---
v13:
No change
v12:
No change
v11:
No change
v10:
No change
v9:
Add 'ranges' property (Rob)
v8:
Add size cell to 'reg' (Rob)
v7:
Use 'reg' instead of 'offset' (Rob)
Add qcom,tcsr-ipq6018 (Rob)
Drop clock-names (Bjorn)
v6:
Make the PWM node child of TCSR (Rob Herring)
Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König)
v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs
v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index e59b9df96c7e..429ad7cb681c 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -390,8 +390,21 @@ tcsr_mutex: hwlock@...5000 {
};
tcsr: syscon@...7000 {
- compatible = "qcom,tcsr-ipq6018", "syscon";
+ compatible = "qcom,tcsr-ipq6018", "syscon", "simple-mfd";
reg = <0x0 0x01937000 0x0 0x21000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x01937000 0x21000>;
+
+ pwm: pwm@...0 {
+ compatible = "qcom,ipq6018-pwm";
+ reg = <0xa010 0x20>;
+ clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clock-rates = <100000000>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
};
usb2: usb@...8800 {
--
2.34.1
Powered by blists - more mailing lists