lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZR1M3FcdXrDmIGu2@xhacker>
Date:   Wed, 4 Oct 2023 19:30:36 +0800
From:   Jisheng Zhang <jszhang@...nel.org>
To:     Drew Fustini <dfustini@...libre.com>,
        Christoph Hellwig <hch@....de>,
        Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Cc:     Robert Nelson <robertcnelson@...il.com>,
        Prabhakar <prabhakar.csengg@...il.com>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Guo Ren <guoren@...nel.org>, Fu Wei <wefu@...hat.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Conor Dooley <conor@...nel.org>,
        Jason Kridner <jkridner@...gleboard.org>,
        Xi Ruoyao <xry111@...111.site>, Han Gao <gaohan@...as.ac.cn>,
        Icenowy Zheng <uwu@...nowy.me>, linux-mmc@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-riscv@...ts.infradead.org,
        Björn Töpel <bjorn@...nel.org>,
        Alexandre Ghiti <alexghiti@...osinc.com>
Subject: Re: [PATCH 0/6] RISC-V: Add eMMC support for TH1520 boards

On Mon, Oct 02, 2023 at 09:37:44PM -0700, Drew Fustini wrote:
> On Fri, Sep 22, 2023 at 05:48:21PM -0500, Robert Nelson wrote:
> > On Fri, Sep 22, 2023 at 2:08 PM Robert Nelson <robertcnelson@...il.com> wrote:
> > >
> > > On Thu, Sep 21, 2023 at 8:51 PM Drew Fustini <dfustini@...libre.com> wrote:
> > > >
> > > > This series adds support for the eMMC on the BeagleV Ahead and the
> > > > Sipeed LicheePi 4A. This allows the kernel to boot with the rootfs on
> > > > eMMC.
> > > >
> > > > I tested on top of v6.6-rc2 with this config [1]. I was able to boot
> > > > both the Ahead [2] and LPi4a [3] from eMMC. The following prerequisites
> > > > are required:
> > > >
> > > >   [PATCH v2] riscv: dts: thead: set dma-noncoherent to soc bus [4]
> > > >
> > > > I pushed a branch [5] with this patch series and the above patch for
> > > > those that find a git branch easier to test.
> > > >
> > > > Please note that only the MMC controller connected to the eMMC device
> > > > is enabled in the device trees for these two boards. I did not yet
> > > > attempt to configure and use the microSD card slot. My preference is to
> > > > address that in a future patch series.
> > > >
> > > > References:
> > > > [1] https://gist.github.com/pdp7/5fbdcf2a65eb1abdd3a29d519c19cdd2
> > > > [2] https://gist.github.com/pdp7/91a801a5f8d1070c53509eda9800ad78
> > > > [3] https://gist.github.com/pdp7/1445c3c991e88fd69c60165cef65726a
> > > > [4] https://lore.kernel.org/linux-riscv/20230912072232.2455-1-jszhang@kernel.org/
> > > > [5] https://github.com/pdp7/linux/tree/b4/th1520-mmc
> > >
> > > This patchset came out very nice!
> > >
> > > v6.6-rc2 with Last RFC v2:
> > >
> > > [    4.066630] mmc0: SDHCI controller on ffe7080000.mmc
> > > [ffe7080000.mmc] using PIO
> > >
> > > debian@...gleV:~$ sudo hdparm -tT /dev/mmcblk0
> > >
> > > /dev/mmcblk0:
> > >  Timing cached reads:   1516 MB in  2.00 seconds = 758.09 MB/sec
> > >  Timing buffered disk reads:  84 MB in  3.01 seconds =  27.94 MB/sec
> > >
> > > vs v6.6-rc2 with this patchset:
> > >
> > >  [    4.096837] mmc0: SDHCI controller on ffe7080000.mmc
> > > [ffe7080000.mmc] using DMA
> > >
> > > debian@...gleV:~$ sudo hdparm -tT /dev/mmcblk0
> > >
> > > /dev/mmcblk0:
> > >  Timing cached reads:   1580 MB in  2.00 seconds = 790.97 MB/sec
> > >  Timing buffered disk reads: 418 MB in  3.00 seconds = 139.11 MB/sec
> > 
> > Drew pointed out on Slack, this was not quite right.. After more
> > digging by Drew, CONFIG_DMA_GLOBAL_POOL is causing a DMA limitation
> > with the multiplatform defconfig. so with,
> > 
> > ./scripts/config --disable CONFIG_ARCH_R9A07G043
> > 
> > (to remove CONFIG_DMA_GLOBAL_POOL)... another 2x in buffered reads..
> > 
> > [    4.059242] mmc0: SDHCI controller on ffe7080000.mmc
> > [ffe7080000.mmc] using ADMA 64-bit
> > 
> > debian@...gleV:~$ sudo hdparm -tT /dev/mmcblk0
> > 
> > /dev/mmcblk0:
> >  Timing cached reads:   1600 MB in  2.00 seconds = 800.93 MB/sec
> >  Timing buffered disk reads: 892 MB in  3.00 seconds = 297.06 MB/sec
> 
> It seems CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail [1]:
> 
>   mmc0: Unable to allocate ADMA buffers - falling back to standard DMA
> 
> Prabhakar's AX45MP non-coherent DMA support [2] series introduced the
> selection of DMA_GLOBAL_POOL for ARCH_R9A07G043 and the riscv defconfig
> selects ARCH_R9A07G043. 
> 
> Patch 5 in the series [3] states that:
> 
>   With DMA_GLOBAL_POOL enabled all DMA allocations happen from this
>   region and synchronization callbacks are implemented to synchronize
>   when doing DMA transactions.
> 
> This example of a "shared-dma-pool" node was given:
> 
>         pma_resv0@...00000 {
>             compatible = "shared-dma-pool";
>             reg = <0x0 0x58000000 0x0 0x08000000>;
>             no-map;
>             linux,dma-default;
>         };
> 
> I've copied that to th1520-beaglev-ahead.dts. The address of 0x58000000
> has no significance on th1520, but the existence of shared-dma-pool
> seems to fix the problem. ADMA mode [4] is now working even though
> CONFIG_DMA_GLOBAL_POOL=y.

+ Christoph, Lad

IMHO, this is not TH1520 specific but a generic issue.

I believe commit 484861e09f3e ("soc: renesas: Kconfig: Select the
required configs for RZ/Five SoC") can cause regression on all
non-dma-coherent riscv platforms with generic defconfig. This is
a common issue. The logic here is: generic riscv defconfig selects
ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all
non-dma-coherent riscv platforms have a dma global pool, this assumption
seems not correct. And I believe DMA_GLOBAL_POOL should not be
selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific
conditions can select it globaly, for example NOMMU ARM and so on.

Since this is a regression, what's proper fix? any suggestion is
appreciated.

Thanks

> 
> Thanks,
> Drew
> 
> [1] https://gist.github.com/pdp7/73041ed808bbc7dd445836fb90574979
> [2] https://lore.kernel.org/linux-riscv/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
> [3] https://lore.kernel.org/linux-riscv/20230818135723.80612-6-prabhakar.mahadev-lad.rj@bp.renesas.com/
> [4] https://gist.github.com/pdp7/91e72a663d3bb73eb28182337ad8bbcb

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ