| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231005182915.153815-1-giulio.benetti@benettiengineering.com>
Date: Thu, 5 Oct 2023 20:29:15 +0200
From: Giulio Benetti <giulio.benetti@...ettiengineering.com>
To: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Giulio Benetti <giulio.benetti+tekvox@...ettiengineering.com>,
Jim Reinhart <jimr@...vox.com>,
James Autry <jautry@...vox.com>,
Matthew Maron <matthewm@...vox.com>
Subject: [PATCH v4] net: phy: broadcom: add support for BCM5221 phy
From: Giulio Benetti <giulio.benetti+tekvox@...ettiengineering.com>
This patch adds the BCM5221 PHY support by reusing brcm_fet_*()
callbacks and adding quirks for BCM5221 when needed.
Cc: Jim Reinhart <jimr@...vox.com>
Cc: James Autry <jautry@...vox.com>
Cc: Matthew Maron <matthewm@...vox.com>
Signed-off-by: Giulio Benetti <giulio.benetti+tekvox@...ettiengineering.com>
---
V1->V2:
Suggested by Andrew Lunn:
* handle mdix_ctrl adding bcm5221_config_aneg() and bcm5221_read_status()
* reorder PHY_ID_BCM5241 in broadcom_tbl[]
Suggested by Russell King:
* add comment on phy_read(..., MII_BRCM_FET_INTREG)
* lock mdio bus when in shadow mode
Suggested by Florian Fainelli:
* reuse brcm_fet_*() callbacks checking for phy_id == PHY_ID_BCM5221
V2->V3:
* rebase on master branch
V3->V4:
Suggested by Russell King:
* improve code style
---
drivers/net/phy/broadcom.c | 154 +++++++++++++++++++++++++++++--------
include/linux/brcmphy.h | 10 +++
2 files changed, 131 insertions(+), 33 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 04b2e6eeb195..3a627105675a 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -704,16 +704,21 @@ static int brcm_fet_config_init(struct phy_device *phydev)
if (err < 0 && err != -EIO)
return err;
+ /* Read to clear status bits */
reg = phy_read(phydev, MII_BRCM_FET_INTREG);
if (reg < 0)
return reg;
/* Unmask events we are interested in and mask interrupts globally. */
- reg = MII_BRCM_FET_IR_DUPLEX_EN |
- MII_BRCM_FET_IR_SPEED_EN |
- MII_BRCM_FET_IR_LINK_EN |
- MII_BRCM_FET_IR_ENABLE |
- MII_BRCM_FET_IR_MASK;
+ if (phydev->phy_id == PHY_ID_BCM5221)
+ reg = MII_BRCM_FET_IR_ENABLE |
+ MII_BRCM_FET_IR_MASK;
+ else
+ reg = MII_BRCM_FET_IR_DUPLEX_EN |
+ MII_BRCM_FET_IR_SPEED_EN |
+ MII_BRCM_FET_IR_LINK_EN |
+ MII_BRCM_FET_IR_ENABLE |
+ MII_BRCM_FET_IR_MASK;
err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
if (err < 0)
@@ -726,42 +731,49 @@ static int brcm_fet_config_init(struct phy_device *phydev)
reg = brcmtest | MII_BRCM_FET_BT_SRE;
- err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
- if (err < 0)
- return err;
+ phy_lock_mdio_bus(phydev);
- /* Set the LED mode */
- reg = phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
- if (reg < 0) {
- err = reg;
- goto done;
+ err = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+ if (err < 0) {
+ phy_unlock_mdio_bus(phydev);
+ return err;
}
- reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
- reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
+ if (phydev->phy_id != PHY_ID_BCM5221) {
+ /* Set the LED mode */
+ reg = __phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
+ if (reg < 0) {
+ err = reg;
+ goto done;
+ }
- err = phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
- if (err < 0)
- goto done;
+ err = __phy_modify(phydev, MII_BRCM_FET_SHDW_AUXMODE4,
+ MII_BRCM_FET_SHDW_AM4_LED_MASK,
+ MII_BRCM_FET_SHDW_AM4_LED_MODE1);
+ if (err < 0)
+ goto done;
- /* Enable auto MDIX */
- err = phy_set_bits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
- MII_BRCM_FET_SHDW_MC_FAME);
- if (err < 0)
- goto done;
+ /* Enable auto MDIX */
+ err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
+ MII_BRCM_FET_SHDW_MC_FAME);
+ if (err < 0)
+ goto done;
+ }
if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) {
/* Enable auto power down */
- err = phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
- MII_BRCM_FET_SHDW_AS2_APDE);
+ err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+ MII_BRCM_FET_SHDW_AS2_APDE);
}
done:
/* Disable shadow register access */
- err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+ err2 = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
if (!err)
err = err2;
+ phy_unlock_mdio_bus(phydev);
+
return err;
}
@@ -840,23 +852,86 @@ static int brcm_fet_suspend(struct phy_device *phydev)
reg = brcmtest | MII_BRCM_FET_BT_SRE;
- err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
- if (err < 0)
+ phy_lock_mdio_bus(phydev);
+
+ err = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+ if (err < 0) {
+ phy_unlock_mdio_bus(phydev);
return err;
+ }
+
+ if (phydev->phy_id == PHY_ID_BCM5221)
+ /* Force Low Power Mode with clock enabled */
+ reg = BCM5221_SHDW_AM4_EN_CLK_LPM | BCM5221_SHDW_AM4_FORCE_LPM;
+ else
+ /* Set standby mode */
+ reg = MII_BRCM_FET_SHDW_AM4_STANDBY;
- /* Set standby mode */
- err = phy_modify(phydev, MII_BRCM_FET_SHDW_AUXMODE4,
- MII_BRCM_FET_SHDW_AM4_STANDBY,
- MII_BRCM_FET_SHDW_AM4_STANDBY);
+ err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
/* Disable shadow register access */
- err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+ err2 = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
if (!err)
err = err2;
+ phy_unlock_mdio_bus(phydev);
+
return err;
}
+static int bcm5221_config_aneg(struct phy_device *phydev)
+{
+ int ret, val;
+
+ ret = genphy_config_aneg(phydev);
+ if (ret)
+ return ret;
+
+ switch (phydev->mdix_ctrl) {
+ case ETH_TP_MDI:
+ val = BCM5221_AEGSR_MDIX_DIS;
+ break;
+ case ETH_TP_MDI_X:
+ val = BCM5221_AEGSR_MDIX_DIS | BCM5221_AEGSR_MDIX_MAN_SWAP;
+ break;
+ case ETH_TP_MDI_AUTO:
+ val = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ return phy_modify(phydev, BCM5221_AEGSR, BCM5221_AEGSR_MDIX_MAN_SWAP |
+ BCM5221_AEGSR_MDIX_DIS,
+ val);
+}
+
+static int bcm5221_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Read MDIX status */
+ ret = phy_read(phydev, BCM5221_AEGSR);
+ if (ret < 0)
+ return ret;
+
+ if (ret & BCM5221_AEGSR_MDIX_DIS) {
+ if (ret & BCM5221_AEGSR_MDIX_MAN_SWAP)
+ phydev->mdix_ctrl = ETH_TP_MDI_X;
+ else
+ phydev->mdix_ctrl = ETH_TP_MDI;
+ } else {
+ phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+ }
+
+ if (ret & BCM5221_AEGSR_MDIX_STATUS)
+ phydev->mdix = ETH_TP_MDI_X;
+ else
+ phydev->mdix = ETH_TP_MDI;
+
+ return genphy_read_status(phydev);
+}
+
static void bcm54xx_phy_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
@@ -1221,6 +1296,18 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = brcm_fet_handle_interrupt,
.suspend = brcm_fet_suspend,
.resume = brcm_fet_config_init,
+}, {
+ .phy_id = PHY_ID_BCM5221,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5221",
+ /* PHY_BASIC_FEATURES */
+ .config_init = brcm_fet_config_init,
+ .config_intr = brcm_fet_config_intr,
+ .handle_interrupt = brcm_fet_handle_interrupt,
+ .suspend = brcm_fet_suspend,
+ .resume = brcm_fet_config_init,
+ .config_aneg = bcm5221_config_aneg,
+ .read_status = bcm5221_read_status,
}, {
.phy_id = PHY_ID_BCM5395,
.phy_id_mask = 0xfffffff0,
@@ -1296,6 +1383,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
{ PHY_ID_BCM50610M, 0xfffffff0 },
{ PHY_ID_BCM57780, 0xfffffff0 },
{ PHY_ID_BCMAC131, 0xfffffff0 },
+ { PHY_ID_BCM5221, 0xfffffff0 },
{ PHY_ID_BCM5241, 0xfffffff0 },
{ PHY_ID_BCM5395, 0xfffffff0 },
{ PHY_ID_BCM53125, 0xfffffff0 },
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index c55810a43541..1394ba302367 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -11,6 +11,7 @@
#define PHY_ID_BCM50610 0x0143bd60
#define PHY_ID_BCM50610M 0x0143bd70
+#define PHY_ID_BCM5221 0x004061e0
#define PHY_ID_BCM5241 0x0143bc30
#define PHY_ID_BCMAC131 0x0143bc70
#define PHY_ID_BCM5481 0x0143bca0
@@ -331,6 +332,15 @@
#define BCM54XX_WOL_INT_STATUS (MII_BCM54XX_EXP_SEL_WOL + 0x94)
+/* BCM5221 Registers */
+#define BCM5221_AEGSR 0x1C
+#define BCM5221_AEGSR_MDIX_STATUS BIT(13)
+#define BCM5221_AEGSR_MDIX_MAN_SWAP BIT(12)
+#define BCM5221_AEGSR_MDIX_DIS BIT(11)
+
+#define BCM5221_SHDW_AM4_EN_CLK_LPM BIT(2)
+#define BCM5221_SHDW_AM4_FORCE_LPM BIT(1)
+
/*****************************************************************************/
/* Fast Ethernet Transceiver definitions. */
/*****************************************************************************/
--
2.34.1
Powered by blists - more mailing lists