[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231005192440.4047-4-linux@zary.sk>
Date: Thu, 5 Oct 2023 21:24:39 +0200
From: Ondrej Zary <linux@...y.sk>
To: Damien Le Moal <dlemoal@...nel.org>,
Sudip Mukherjee <sudipm.mukherjee@...il.com>
Cc: Christoph Hellwig <hch@....de>,
Sergey Shtylyov <s.shtylyov@....ru>,
Tim Waugh <tim@...erelk.net>,
linux-parport@...ts.infradead.org, linux-ide@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 3/4] ata: pata_parport: add custom version of wait_after_reset
Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return
bogus values when there's no master device present. This can cause
reset to fail, preventing the lone slave device (such as EXP Computer
CD-865) from working.
Add custom version of wait_after_reset that ignores master failure when
a slave device is present. The custom version is also needed because
the generic ata_sff_wait_after_reset uses direct port I/O for slave
device detection.
Signed-off-by: Ondrej Zary <linux@...y.sk>
---
drivers/ata/pata_parport/pata_parport.c | 67 ++++++++++++++++++++++++-
1 file changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index cf87bbb52f1f..318b2ce2d8d1 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -80,6 +80,71 @@ static bool pata_parport_devchk(struct ata_port *ap, unsigned int device)
return (nsect == 0x55) && (lbal == 0xaa);
}
+static int pata_parport_wait_after_reset(struct ata_link *link,
+ unsigned int devmask,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pi_adapter *pi = ap->host->private_data;
+ unsigned int dev0 = devmask & (1 << 0);
+ unsigned int dev1 = devmask & (1 << 1);
+ int rc, ret = 0;
+
+ ata_msleep(ap, ATA_WAIT_AFTER_RESET);
+
+ /* always check readiness of the master device */
+ rc = ata_sff_wait_ready(link, deadline);
+ if (rc) {
+ /*
+ * some adapters return bogus values if master device is not
+ * present, so don't abort now if a slave device is present
+ */
+ if (!dev1)
+ return rc;
+ ret = -ENODEV;
+ }
+
+ /*
+ * if device 1 was found in ata_devchk, wait for register
+ * access briefly, then wait for BSY to clear.
+ */
+ if (dev1) {
+ int i;
+
+ pata_parport_dev_select(ap, 1);
+ /*
+ * Wait for register access. Some ATAPI devices fail
+ * to set nsect/lbal after reset, so don't waste too
+ * much time on it. We're gonna wait for !BSY anyway.
+ */
+ for (i = 0; i < 2; i++) {
+ u8 nsect, lbal;
+
+ nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT);
+ lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL);
+ if ((nsect == 1) && (lbal == 1))
+ break;
+ /* give drive a breather */
+ ata_msleep(ap, 50);
+ }
+
+ rc = ata_sff_wait_ready(link, deadline);
+ if (rc) {
+ if (rc != -ENODEV)
+ return rc;
+ ret = rc;
+ }
+ }
+
+ pata_parport_dev_select(ap, 0);
+ if (dev1)
+ pata_parport_dev_select(ap, 1);
+ if (dev0)
+ pata_parport_dev_select(ap, 0);
+
+ return ret;
+}
+
static int pata_parport_bus_softreset(struct ata_port *ap, unsigned int devmask,
unsigned long deadline)
{
@@ -94,7 +159,7 @@ static int pata_parport_bus_softreset(struct ata_port *ap, unsigned int devmask,
ap->last_ctl = ap->ctl;
/* wait the port to become ready */
- return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
+ return pata_parport_wait_after_reset(&ap->link, devmask, deadline);
}
static int pata_parport_softreset(struct ata_link *link, unsigned int *classes,
--
Ondrej Zary
Powered by blists - more mailing lists