| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3a7245598265737ae4296fa6b0ab03a51708c502.1696425185.git.sandipan.das@amd.com>
Date: Thu, 5 Oct 2023 10:53:16 +0530
From: Sandipan Das <sandipan.das@....com>
To: <linux-kernel@...r.kernel.org>, <linux-perf-users@...r.kernel.org>,
<x86@...nel.org>
CC: <peterz@...radead.org>, <mingo@...hat.com>, <acme@...nel.org>,
<mark.rutland@....com>, <alexander.shishkin@...ux.intel.com>,
<jolsa@...nel.org>, <namhyung@...nel.org>, <irogers@...gle.com>,
<adrian.hunter@...el.com>, <tglx@...utronix.de>, <bp@...en8.de>,
<dave.hansen@...ux.intel.com>, <hpa@...or.com>,
<eranian@...gle.com>, <ananth.narayan@....com>,
<ravi.bangoria@....com>, <santosh.shukla@....com>,
<sandipan.das@....com>
Subject: [PATCH v2 6/6] perf vendor events amd: Add Zen 4 memory controller events
Make the jevents parser aware of the Unified Memory Controller (UMC) PMU
and add events taken from Section 8.2.1 "UMC Performance Monitor Events"
of the Processor Programming Reference (PPR) for AMD Family 19h Model 11h
processors. The events capture UMC command activity such as CAS, ACTIVATE,
PRECHARGE etc. while the metrics derive data bus utilization and memory
bandwidth out of these events.
Signed-off-by: Sandipan Das <sandipan.das@....com>
Acked-by: Ian Rogers <irogers@...gle.com>
---
.../arch/x86/amdzen4/memory-controller.json | 101 ++++++++++++++++++
.../arch/x86/amdzen4/recommended.json | 84 +++++++++++++++
tools/perf/pmu-events/jevents.py | 2 +
3 files changed, 187 insertions(+)
create mode 100644 tools/perf/pmu-events/arch/x86/amdzen4/memory-controller.json
diff --git a/tools/perf/pmu-events/arch/x86/amdzen4/memory-controller.json b/tools/perf/pmu-events/arch/x86/amdzen4/memory-controller.json
new file mode 100644
index 000000000000..55263e5e4f69
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen4/memory-controller.json
@@ -0,0 +1,101 @@
+[
+ {
+ "EventName": "umc_mem_clk",
+ "PublicDescription": "Number of memory clock cycles.",
+ "EventCode": "0x00",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_act_cmd.all",
+ "PublicDescription": "Number of ACTIVATE commands sent.",
+ "EventCode": "0x05",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_act_cmd.rd",
+ "PublicDescription": "Number of ACTIVATE commands sent for reads.",
+ "EventCode": "0x05",
+ "RdWrMask": "0x1",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_act_cmd.wr",
+ "PublicDescription": "Number of ACTIVATE commands sent for writes.",
+ "EventCode": "0x05",
+ "RdWrMask": "0x2",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_pchg_cmd.all",
+ "PublicDescription": "Number of PRECHARGE commands sent.",
+ "EventCode": "0x06",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_pchg_cmd.rd",
+ "PublicDescription": "Number of PRECHARGE commands sent for reads.",
+ "EventCode": "0x06",
+ "RdWrMask": "0x1",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_pchg_cmd.wr",
+ "PublicDescription": "Number of PRECHARGE commands sent for writes.",
+ "EventCode": "0x06",
+ "RdWrMask": "0x2",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_cas_cmd.all",
+ "PublicDescription": "Number of CAS commands sent.",
+ "EventCode": "0x0a",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_cas_cmd.rd",
+ "PublicDescription": "Number of CAS commands sent for reads.",
+ "EventCode": "0x0a",
+ "RdWrMask": "0x1",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_cas_cmd.wr",
+ "PublicDescription": "Number of CAS commands sent for writes.",
+ "EventCode": "0x0a",
+ "RdWrMask": "0x2",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_data_slot_clks.all",
+ "PublicDescription": "Number of clocks used by the data bus.",
+ "EventCode": "0x14",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_data_slot_clks.rd",
+ "PublicDescription": "Number of clocks used by the data bus for reads.",
+ "EventCode": "0x14",
+ "RdWrMask": "0x1",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ },
+ {
+ "EventName": "umc_data_slot_clks.wr",
+ "PublicDescription": "Number of clocks used by the data bus for writes.",
+ "EventCode": "0x14",
+ "RdWrMask": "0x2",
+ "PerPkg": "1",
+ "Unit": "UMCPMC"
+ }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen4/recommended.json b/tools/perf/pmu-events/arch/x86/amdzen4/recommended.json
index 5e6a793acf7b..96e06401c6cb 100644
--- a/tools/perf/pmu-events/arch/x86/amdzen4/recommended.json
+++ b/tools/perf/pmu-events/arch/x86/amdzen4/recommended.json
@@ -330,5 +330,89 @@
"MetricGroup": "data_fabric",
"PerPkg": "1",
"ScaleUnit": "6.103515625e-5MiB"
+ },
+ {
+ "MetricName": "umc_data_bus_utilization",
+ "BriefDescription": "Memory controller data bus utilization.",
+ "MetricExpr": "d_ratio(umc_data_slot_clks.all / 2, umc_mem_clk)",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1",
+ "ScaleUnit": "100%"
+ },
+ {
+ "MetricName": "umc_cas_cmd_rate",
+ "BriefDescription": "Memory controller CAS command rate.",
+ "MetricExpr": "d_ratio(umc_cas_cmd.all * 1000, umc_mem_clk)",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1"
+ },
+ {
+ "MetricName": "umc_cas_cmd_read_ratio",
+ "BriefDescription": "Ratio of memory controller CAS commands for reads.",
+ "MetricExpr": "d_ratio(umc_cas_cmd.rd, umc_cas_cmd.all)",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1",
+ "ScaleUnit": "100%"
+ },
+ {
+ "MetricName": "umc_cas_cmd_write_ratio",
+ "BriefDescription": "Ratio of memory controller CAS commands for writes.",
+ "MetricExpr": "d_ratio(umc_cas_cmd.wr, umc_cas_cmd.all)",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1",
+ "ScaleUnit": "100%"
+ },
+ {
+ "MetricName": "umc_mem_read_bandwidth",
+ "BriefDescription": "Estimated memory read bandwidth.",
+ "MetricExpr": "(umc_cas_cmd.rd * 64) / 1e6 / duration_time",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1",
+ "ScaleUnit": "1MB/s"
+ },
+ {
+ "MetricName": "umc_mem_write_bandwidth",
+ "BriefDescription": "Estimated memory write bandwidth.",
+ "MetricExpr": "(umc_cas_cmd.wr * 64) / 1e6 / duration_time",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1",
+ "ScaleUnit": "1MB/s"
+ },
+ {
+ "MetricName": "umc_mem_bandwidth",
+ "BriefDescription": "Estimated combined memory bandwidth.",
+ "MetricExpr": "(umc_cas_cmd.all * 64) / 1e6 / duration_time",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1",
+ "ScaleUnit": "1MB/s"
+ },
+ {
+ "MetricName": "umc_cas_cmd_read_ratio",
+ "BriefDescription": "Ratio of memory controller CAS commands for reads.",
+ "MetricExpr": "d_ratio(umc_cas_cmd.rd, umc_cas_cmd.all)",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1",
+ "ScaleUnit": "100%"
+ },
+ {
+ "MetricName": "umc_cas_cmd_rate",
+ "BriefDescription": "Memory controller CAS command rate.",
+ "MetricExpr": "d_ratio(umc_cas_cmd.all * 1000, umc_mem_clk)",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1"
+ },
+ {
+ "MetricName": "umc_activate_cmd_rate",
+ "BriefDescription": "Memory controller ACTIVATE command rate.",
+ "MetricExpr": "d_ratio(umc_act_cmd.all * 1000, umc_mem_clk)",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1"
+ },
+ {
+ "MetricName": "umc_precharge_cmd_rate",
+ "BriefDescription": "Memory controller PRECHARGE command rate.",
+ "MetricExpr": "d_ratio(umc_pchg_cmd.all * 1000, umc_mem_clk)",
+ "MetricGroup": "memory_controller",
+ "PerPkg": "1"
}
]
diff --git a/tools/perf/pmu-events/jevents.py b/tools/perf/pmu-events/jevents.py
index 72ba4a9239c6..ff202e0b7b0a 100755
--- a/tools/perf/pmu-events/jevents.py
+++ b/tools/perf/pmu-events/jevents.py
@@ -286,6 +286,7 @@ class JsonEvent:
'imx8_ddr': 'imx8_ddr',
'L3PMC': 'amd_l3',
'DFPMC': 'amd_df',
+ 'UMCPMC': 'amd_umc',
'cpu_core': 'cpu_core',
'cpu_atom': 'cpu_atom',
'ali_drw': 'ali_drw',
@@ -345,6 +346,7 @@ class JsonEvent:
('Invert', 'inv='),
('SampleAfterValue', 'period='),
('UMask', 'umask='),
+ ('RdWrMask', 'rdwrmask='),
]
for key, value in event_fields:
if key in jd and jd[key] != '0':
--
2.34.1
Powered by blists - more mailing lists