[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c7c32ec5-d0c1-443d-9851-3bb8e772c8fc@ti.com>
Date: Thu, 5 Oct 2023 06:45:26 +0530
From: "J, KEERTHY" <j-keerthy@...com>
To: Vignesh Raghavendra <vigneshr@...com>, <robh+dt@...nel.org>,
<nm@...com>, <conor+dt@...nel.org>, <kristo@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>
CC: <u-kumar1@...com>, <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6 2/7] arm64: dts: ti: k3-j784s4: Add ESM instances
On 10/3/2023 12:20 PM, Vignesh Raghavendra wrote:
>
>
> On 27/09/23 08:03, Keerthy wrote:
>> Patch adds the ESM instances for j784s4. It has 3 instances.
>> One in the main domain and two in the mcu-wakeup domian.
>>
>> Signed-off-by: Keerthy <j-keerthy@...com>
>> ---
>> arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 8 ++++++++
>> arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 14 ++++++++++++++
>> 2 files changed, 22 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> index efed2d683f63..26dc3776f911 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> @@ -1568,4 +1568,12 @@
>> firmware-name = "j784s4-c71_3-fw";
>> status = "disabled";
>> };
>> +
>> + main_esm: esm@...000 {
>> + compatible = "ti,j721e-esm";
>> + reg = <0x00 0x700000 0x00 0x1000>;
>> + ti,esm-pins = <688>, <689>, <690>, <691>, <692>, <693>, <694>,
>> + <695>;
>> + bootph-pre-ram;
>
> Similar to other nodes in this file, here and elsewhere use
> bootph-all
Okay. I will switch to bootph-all
>
>
>> + };
>> };
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>> index 4ab4018d3695..a7b5c4cb7d3e 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>> @@ -700,4 +700,18 @@
>> status = "disabled";
>> };
>> };
>> +
>> + mcu_esm: esm@...00000 {
>> + compatible = "ti,j721e-esm";
>> + reg = <0x00 0x40800000 0x00 0x1000>;
>> + ti,esm-pins = <95>;
>> + bootph-pre-ram;
>> + };
>> +
>> + wkup_esm: esm@...80000 {
>> + compatible = "ti,j721e-esm";
>> + reg = <0x00 0x42080000 0x00 0x1000>;
>> + ti,esm-pins = <63>;
>> + bootph-pre-ram;
>> + };
>> };
>
Powered by blists - more mailing lists