| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231005035525.19036-8-chanh@os.amperecomputing.com>
Date: Thu, 5 Oct 2023 10:55:25 +0700
From: Chanh Nguyen <chanh@...amperecomputing.com>
To: OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Cc: Chanh Nguyen <chanh@...amperecomputing.com>
Subject: [PATCH 7/7] ARM: dts: aspeed: mtmitchell: Add I2C NVMe alias port
Adds the I2C alias ports to each NVMe drive via the
backplane card.
Besides that, it also adds the eeprom and temperature sensor
on the backplane card.
Signed-off-by: Chanh Nguyen <chanh@...amperecomputing.com>
---
.../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 267 ++++++++++++++++++
1 file changed, 267 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index eb8d5e367276..1f70e3e4e83b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -14,6 +14,42 @@
aliases {
serial7 = &uart8;
serial8 = &uart9;
+
+ /*
+ * I2C NVMe alias port
+ */
+ i2c100 = &backplane_0;
+ i2c48 = &nvmeslot_0;
+ i2c49 = &nvmeslot_1;
+ i2c50 = &nvmeslot_2;
+ i2c51 = &nvmeslot_3;
+ i2c52 = &nvmeslot_4;
+ i2c53 = &nvmeslot_5;
+ i2c54 = &nvmeslot_6;
+ i2c55 = &nvmeslot_7;
+
+ i2c101 = &backplane_1;
+ i2c56 = &nvmeslot_8;
+ i2c57 = &nvmeslot_9;
+ i2c58 = &nvmeslot_10;
+ i2c59 = &nvmeslot_11;
+ i2c60 = &nvmeslot_12;
+ i2c61 = &nvmeslot_13;
+ i2c62 = &nvmeslot_14;
+ i2c63 = &nvmeslot_15;
+
+ i2c102 = &backplane_2;
+ i2c64 = &nvmeslot_16;
+ i2c65 = &nvmeslot_17;
+ i2c66 = &nvmeslot_18;
+ i2c67 = &nvmeslot_19;
+ i2c68 = &nvmeslot_20;
+ i2c69 = &nvmeslot_21;
+ i2c70 = &nvmeslot_22;
+ i2c71 = &nvmeslot_23;
+
+ i2c80 = &nvme_m2_0;
+ i2c81 = &nvme_m2_1;
};
chosen {
@@ -534,6 +570,237 @@
&i2c9 {
status = "okay";
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ backplane_1: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ nvmeslot_8: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+ nvmeslot_9: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ nvmeslot_10: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ nvmeslot_11: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ nvmeslot_12: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ nvmeslot_13: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+ nvmeslot_14: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+ nvmeslot_15: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
+
+ tmp432@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+ };
+
+ backplane_2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ nvmeslot_16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+ nvmeslot_17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ nvmeslot_18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ nvmeslot_19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ nvmeslot_20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ nvmeslot_21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+ nvmeslot_22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+ nvmeslot_23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
+
+ tmp432@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+ };
+
+ backplane_0: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ nvmeslot_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+ nvmeslot_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ nvmeslot_2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ nvmeslot_3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ nvmeslot_4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ nvmeslot_5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+ nvmeslot_6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+ nvmeslot_7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
+
+ tmp432@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ nvme_m2_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+
+ nvme_m2_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ };
+ };
+ };
};
&i2c11 {
--
2.17.1
Powered by blists - more mailing lists