[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdXsvs886VaKsVgG-h-0iBAhueunUBBcYW0L48GTHApUbA@mail.gmail.com>
Date: Thu, 5 Oct 2023 12:04:09 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Claudiu <claudiu.beznea@...on.dev>
Cc: geert+renesas@...der.be, mturquette@...libre.com, sboyd@...nel.org,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, linus.walleij@...aro.org,
gregkh@...uxfoundation.org, jirislaby@...nel.org,
magnus.damm@...il.com, catalin.marinas@....com, will@...nel.org,
quic_bjorande@...cinc.com, konrad.dybcio@...aro.org, arnd@...db.de,
neil.armstrong@...aro.org, prabhakar.mahadev-lad.rj@...renesas.com,
biju.das.jz@...renesas.com, linux-renesas-soc@...r.kernel.org,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-serial@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 18/28] pinctrl: renesas: rzg2l: add support for
different ds values on different groups
On Wed, Oct 4, 2023 at 3:17 PM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> On Fri, Sep 29, 2023 at 7:39 AM Claudiu <claudiu.beznea@...on.dev> wrote:
> > From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> >
> > RZ/G3S supports different drive strength values for different power sources
> > and pin groups (A, B, C). On each group there could be up to 4 drive
> > strength values per power source. Available power sources are 1v8, 2v5,
> > 3v3. Drive strength values are fine tuned than what was previously
> > available on the driver thus the necessity of having micro-amp support.
> > As drive strength and power source values are linked together the
> > hardware setup for these was moved at the end of
> > rzg2l_pinctrl_pinconf_set() to ensure proper validation of the new
> > values.
> >
> > The drive strength values are expected to be initialized though SoC
> > specific hardware configuration data structure.
> >
> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> > ---
> >
> > Changes in v2:
> > - s/strenght/strength, s/togheter/together in commit description
> > - got rid of RZG2L_INVALID_IOLH_VAL macro and consider zero as invalid
> > value for entries in struct rzg2l_hwcfg::iolh_group[abc]_ua[] arrays
> > - removed spinlock in rzg2l_[sg]et_power_source()
> > - introduced caps_to_pwr_reg() and simplified the code in
> > rzg2l_[sg]et_power_source()
> > - changed return type of rzg2l_iolh_ua_to_val() to int and return
> > -EINVAL on failure cases
> > - s/rzg2l_ds_supported/rzg2l_ds_is_supported
> > - inverted the logic in rzg2l_pinctrl_pinconf_set() when applying drive
> > strength and power source to hardware registers and thus simplified the
> > code
> > - used devm_kcalloc() instead of devm_kzalloc()
> > - adderessed the rest of the review comments
Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
> Thanks, will queue in renesas-pinctrl-for-v6.7, with Paul's comment
> addresses.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists