linux-kernel - Re: [PATCH RFC v5 2/6] ARM: pxa: Convert Spitz LEDs to GPIO descriptors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMRc=Mf9x-Rui32ZYqcxhV5vA=r3mCLxqySs2pwNC6uaVmL=0w@mail.gmail.com>
Date:   Fri, 6 Oct 2023 08:50:47 +0200
From:   Bartosz Golaszewski <brgl@...ev.pl>
To:     Duje Mihanović <duje.mihanovic@...le.hr>
Cc:     Daniel Mack <daniel@...que.org>,
        Haojian Zhuang <haojian.zhuang@...il.com>,
        Robert Jarzmik <robert.jarzmik@...e.fr>,
        Russell King <linux@...linux.org.uk>,
        Alan Stern <stern@...land.harvard.edu>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Andy Shevchenko <andy@...nel.org>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Mark Brown <broonie@...nel.org>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-usb@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-input@...r.kernel.org, linux-spi@...r.kernel.org
Subject: Re: [PATCH RFC v5 2/6] ARM: pxa: Convert Spitz LEDs to GPIO descriptors

On Wed, Oct 4, 2023 at 4:56 PM Duje Mihanović <duje.mihanovic@...le.hr> wrote:
>
> Sharp's Spitz board still uses the legacy GPIO interface for configuring
> its two onboard LEDs.
>
> Convert them to use the GPIO descriptor interface.
>
> Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
> Signed-off-by: Duje Mihanović <duje.mihanovic@...le.hr>
> ---
>  arch/arm/mach-pxa/spitz.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index 535e2b2e997b..b6a4085e9fb0 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {}
>   * LEDs
>   ******************************************************************************/
>  #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
> +static struct gpiod_lookup_table spitz_led_gpio_table = {
> +       .dev_id = "leds-gpio",
> +       .table = {
> +               GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0,
> +                               GPIO_ACTIVE_HIGH),
> +               GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1,
> +                               GPIO_ACTIVE_HIGH),
> +               { }
> +       }
> +};
> +
>  static struct gpio_led spitz_gpio_leds[] = {
>         {
>                 .name                   = "spitz:amber:charge",
>                 .default_trigger        = "sharpsl-charge",
> -               .gpio                   = SPITZ_GPIO_LED_ORANGE,
>         },
>         {
>                 .name                   = "spitz:green:hddactivity",
>                 .default_trigger        = "disk-activity",
> -               .gpio                   = SPITZ_GPIO_LED_GREEN,
>         },
>  };
>
> @@ -480,7 +489,12 @@ static struct platform_device spitz_led_device = {
>
>  static void __init spitz_leds_init(void)
>  {
> +       gpiod_add_lookup_table(&spitz_led_gpio_table);
>         platform_device_register(&spitz_led_device);
> +       spitz_gpio_leds[0].gpiod = gpiod_get_index(&spitz_led_device.dev,
> +                       NULL, 0, GPIOD_ASIS);
> +       spitz_gpio_leds[1].gpiod = gpiod_get_index(&spitz_led_device.dev,
> +                       NULL, 1, GPIOD_ASIS);

You're not using the con_id you specified in the lookup table. How
about using gpiod_get_array()?

Bart

>  }
>  #else
>  static inline void spitz_leds_init(void) {}
>
> --
> 2.42.0
>
>