| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231006103500.2015183-3-jbrunet@baylibre.com>
Date: Fri, 6 Oct 2023 12:35:00 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Jerome Brunet <jbrunet@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
Da Xue <da.xue@...retech.co>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-amlogic@...ts.infradead.org
Subject: [PATCH v2 2/2] arm64: dts: amlogic: add libretech cottonwood support
Add support for the Libretech cottonwood board family.
These 2 boards are based on the same PCB, with an RPi B form factor.
The "Alta" board uses an a311d while the "Solitude" variant uses an s905d3.
Co-developed-by: Da Xue <da.xue@...retech.co>
Signed-off-by: Da Xue <da.xue@...retech.co>
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../amlogic/meson-g12b-a311d-libretech-cc.dts | 121 ++++
.../amlogic/meson-libretech-cottonwood.dtsi | 614 ++++++++++++++++++
.../amlogic/meson-sm1-s905d3-libretech-cc.dts | 89 +++
4 files changed, 826 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 4ce401d17b63..cc8b34bd583d 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-libretech-cc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
@@ -73,6 +74,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
new file mode 100644
index 000000000000..65b963d794cd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@...libre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include "meson-g12b-a311d.dtsi"
+#include "meson-libretech-cottonwood.dtsi"
+
+/ {
+ compatible = "libretech,aml-a311d-cc", "amlogic,a311d", "amlogic,g12b";
+ model = "Libre Computer AML-A311D-CC Alta";
+
+ vddcpu_a: regulator-vddcpu-a {
+ compatible = "pwm-regulator";
+ regulator-name = "VDDCPU_A";
+ regulator-min-microvolt = <730000>;
+ regulator-max-microvolt = <1011000>;
+ regulator-boot-on;
+ regulator-always-on;
+ pwm-supply = <&dc_in>;
+ pwms = <&pwm_ab 0 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+ };
+
+ sound {
+ model = "LC-ALTA";
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 0", "TDM_A Capture",
+ "TDMIN_B IN 0", "TDM_A Capture",
+ "TDMIN_C IN 0", "TDM_A Capture",
+ "TDMIN_A IN 3", "TDM_A Loopback",
+ "TDMIN_B IN 3", "TDM_A Loopback",
+ "TDMIN_C IN 3", "TDM_A Loopback",
+ "TDMIN_A IN 1", "TDM_B Capture",
+ "TDMIN_B IN 1", "TDM_B Capture",
+ "TDMIN_C IN 1", "TDM_B Capture",
+ "TDMIN_A IN 4", "TDM_B Loopback",
+ "TDMIN_B IN 4", "TDM_B Loopback",
+ "TDMIN_C IN 4", "TDM_B Loopback",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_B IN 2", "TDM_C Capture",
+ "TDMIN_C IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TDMIN_B IN 5", "TDM_C Loopback",
+ "TDMIN_C IN 5", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "Lineout", "ACODEC LOLP",
+ "Lineout", "ACODEC LORP";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table_0>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table_0>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu100 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu101 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu102 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu103 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&pwm_ab {
+ pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>;
+ clocks = <&xtal>, <&xtal>;
+ clock-names = "clkin0", "clkin1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
new file mode 100644
index 000000000000..ed826f673349
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@...libre.com>
+ */
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ spi0 = &spifc;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ dioo2133: audio-amplifier-0 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>;
+ VCC-supply = <&vcc_5v>;
+ sound-name-prefix = "10U2";
+ };
+
+ /* TOFIX: handle CVBS_DET on SARADC channel 0 */
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ led-blue {
+ compatible = "pwm-leds";
+
+ led {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_ACTIVITY;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <255>;
+ pwms = <&pwm_cd 1 1250 0>;
+ active-low;
+ };
+ };
+
+ led-green {
+ compatible = "pwm-leds";
+
+ led {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "default-on";
+ max-brightness = <255>;
+ pwms = <&pwm_ab 1 1250 0>;
+ active-low;
+ };
+ };
+
+ led-orange {
+ compatible = "gpio-leds";
+
+ led {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_STANDBY;
+ gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+ };
+
+ dc_in: regulator-dc-in {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ flash_1v8: regulator-flash-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_card: regulator-vcc-card {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_CARD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ enable-active-high;
+ gpio-open-drain;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vddao_3v3>;
+
+ /* FIXME: controlled by TEST_N */
+ };
+
+ vcc_5v: regulator-vcc-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&dc_in>;
+ gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ enable-active-high;
+ gpio-open-drain;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&dc_in>;
+ };
+
+ vddcpu_b: regulator-vddcpu-b {
+ compatible = "pwm-regulator";
+ regulator-name = "VDDCPU_B";
+ regulator-min-microvolt = <730000>;
+ regulator-max-microvolt = <1011000>;
+ regulator-boot-on;
+ regulator-always-on;
+ pwm-supply = <&dc_in>;
+ pwms = <&pwm_AO_cd 1 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&vddao_3v3>;
+ };
+
+ vddio_c: regulator-vddio_c {
+ compatible = "regulator-gpio";
+ regulator-name = "VDDIO_C";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-settling-time-up-us = <200>;
+ regulator-settling-time-down-us = <50000>;
+ vin-supply = <&vddao_3v3>;
+ gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>;
+ states = <3300000 0>,
+ <1800000 1>;
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ audio-widgets = "Line", "Lineout";
+ audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
+ <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+ <&dioo2133>;
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /*
+ * Audio setup: The 40 pins header provides access to 2 TDMs,
+ * SPDIF In/Out and PDM inputs.
+ * - TDM A: 2 lanes
+ * D0: 40/X9
+ * D1: 38/X8
+ * BCLK: 12/X11
+ * FS: 35/X10
+ * - TDM B: 4 lanes
+ * D0: 37/A3
+ * D1: 16/A4
+ * D2: 18/A5 or 7/AO6
+ * D3: 22/A6 or 21/H5
+ * BCLK: 29/A1 or 8/AO8
+ * FS: 31/A2 or 11/AO7
+ * - 2 Master Clocks:
+ * MCLK0: 15/A0 or 10/AO9
+ * MCLK1: 33/X15
+ * - SPDIF:
+ * OUT: 32/A11
+ * IN: 21/H5
+ * - PDM Input:
+ * DO: 13/A8
+ * D1: 26/A9
+ * D2: 22/A6
+ * D3: 18/A5
+ * DCLK: 36/A7
+ *
+ * TDM C is not usable on the 40 pins connector so it is
+ * setup for the HDMI 4 lanes i2s.
+ *
+ * No pinctrl is enabled by default to preserve the
+ * genericity of the 40 pins header. Many configurations are
+ * possible based on the desired use case. Please adjust TDM
+ * masks, clock setups and pinctrl accordingly.
+ */
+
+ dai-link-6 {
+ sound-dai = <&tdmif_a>;
+ dai-format = "dsp_a";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_A>;
+ };
+ };
+
+ dai-link-7 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_B>;
+ };
+ };
+
+ dai-link-8 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_C>;
+ };
+ };
+
+ dai-link-9 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+
+ dai-link-10 {
+ sound-dai = <&toacodec TOACODEC_OUT>;
+
+ codec {
+ sound-dai = <&acodec>;
+ };
+ };
+ };
+};
+
+&acodec {
+ status = "okay";
+ AVDD-supply = <&vddio_ao18>;
+};
+
+&arb {
+ status = "okay";
+};
+
+&cecb_AO {
+ status = "okay";
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&dwc3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub: hub@1 {
+ compatible = "usb5e3,626";
+ reg = <1>;
+ reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&vcc_5v>;
+ };
+};
+
+ðmac {
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>, <ð_phy_irq_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <100000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&periphs_pinctrl {
+ spi_cs_disable_pins: spi-cs-disable {
+ mux {
+ groups = "BOOT_14";
+ function = "gpio_periphs";
+ bias-disable;
+ output-high;
+ };
+ };
+
+ eth_phy_irq_pins: eth-phy-irq {
+ mux {
+ groups = "GPIOZ_14";
+ function = "gpio_periphs";
+ bias-pull-up;
+ output-disable;
+ };
+ };
+};
+
+&pwm_AO_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+};
+
+&pwm_ab {
+ status = "okay";
+ pinctrl-0 = <&pwm_b_x7_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_d_x3_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vcc_card>;
+ vqmmc-supply = <&vddio_c>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>,
+ <&spi_cs_disable_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&flash_1v8>;
+};
+
+&spifc {
+ status = "disabled";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>;
+
+ w25lq128d: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <80000000>;
+ };
+};
+
+&tdmif_a {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmif_c {
+ status = "okay";
+};
+
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmin_c {
+ status = "okay";
+};
+
+&tdmout_a {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tdmout_c {
+ status = "okay";
+};
+
+&toacodec {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb2_phy1 {
+ phy-supply = <&dc_in>;
+};
+
+&usb3_pcie_phy {
+ phy-supply = <&vcc_5v>;
+};
+
+&usb {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
new file mode 100644
index 000000000000..537370db360f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@...libre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include "meson-sm1.dtsi"
+#include "meson-libretech-cottonwood.dtsi"
+
+/ {
+ compatible = "libretech,aml-s905d3-cc", "amlogic,sm1";
+ model = "Libre Computer AML-S905D3-CC Solitude";
+
+ sound {
+ model = "LC-SOLITUDE";
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 0", "TDM_A Capture",
+ "TDMIN_B IN 0", "TDM_A Capture",
+ "TDMIN_C IN 0", "TDM_A Capture",
+ "TDMIN_A IN 13", "TDM_A Loopback",
+ "TDMIN_B IN 13", "TDM_A Loopback",
+ "TDMIN_C IN 13", "TDM_A Loopback",
+ "TDMIN_A IN 1", "TDM_B Capture",
+ "TDMIN_B IN 1", "TDM_B Capture",
+ "TDMIN_C IN 1", "TDM_B Capture",
+ "TDMIN_A IN 14", "TDM_B Loopback",
+ "TDMIN_B IN 14", "TDM_B Loopback",
+ "TDMIN_C IN 14", "TDM_B Loopback",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_B IN 2", "TDM_C Capture",
+ "TDMIN_C IN 2", "TDM_C Capture",
+ "TDMIN_A IN 15", "TDM_C Loopback",
+ "TDMIN_B IN 15", "TDM_C Loopback",
+ "TDMIN_C IN 15", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "Lineout", "ACODEC LOLP",
+ "Lineout", "ACODEC LORP";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU1_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu2 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU2_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu3 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU3_CLK>;
+ clock-latency = <50000>;
+};
--
2.40.1
Powered by blists - more mailing lists