[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <df27b5a4-9010-e76c-e974-452ee8ee22c3@kernel.org>
Date: Sat, 7 Oct 2023 03:24:33 +0900
From: Chanwoo Choi <chanwoo@...nel.org>
To: Sascha Hauer <s.hauer@...gutronix.de>,
linux-rockchip@...ts.infradead.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, Heiko Stuebner <heiko@...ech.de>,
Kyungmin Park <kyungmin.park@...sung.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Will Deacon <will@...nel.org>,
Mark Rutland <mark.rutland@....com>, kernel@...gutronix.de,
Michael Riesch <michael.riesch@...fvision.net>,
Robin Murphy <robin.murphy@....com>,
Vincent Legoll <vincent.legoll@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>
Subject: Re: [PATCH v7 11/26] PM / devfreq: rockchip-dfi: Handle LPDDR2
correctly
On 23. 7. 4. 18:32, Sascha Hauer wrote:
> According to the downstream driver the DDRMON_CTRL_LPDDR23 bit must be
> set for both LPDDR2 and LPDDR3. Add the missing LPDDR2 case and while
> at it turn the if/else if/else into switch/case which makes it easier
> to read.
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Reviewed-by: Sebastian Reichel <sebastian.reichel@...labora.com>
> Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
> ---
> drivers/devfreq/event/rockchip-dfi.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c
> index 261d112580c9e..16cd5365671f7 100644
> --- a/drivers/devfreq/event/rockchip-dfi.c
> +++ b/drivers/devfreq/event/rockchip-dfi.c
> @@ -82,12 +82,19 @@ static void rockchip_dfi_start_hardware_counter(struct devfreq_event_dev *edev)
> DDRMON_CTRL_HARDWARE_EN), dfi_regs + DDRMON_CTRL);
>
> /* set ddr type to dfi */
> - if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR3)
> + switch (dfi->ddr_type) {
> + case ROCKCHIP_DDRTYPE_LPDDR2:
> + case ROCKCHIP_DDRTYPE_LPDDR3:
> writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR23, DDRMON_CTRL_DDR_TYPE_MASK),
> dfi_regs + DDRMON_CTRL);
> - else if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR4)
> + break;
> + case ROCKCHIP_DDRTYPE_LPDDR4:
> writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR4, DDRMON_CTRL_DDR_TYPE_MASK),
> dfi_regs + DDRMON_CTRL);
> + break;
> + default:
> + break;
> + }
>
> /* enable count, use software mode */
> writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_SOFTWARE_EN, DDRMON_CTRL_SOFTWARE_EN),
Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
--
Best Regards,
Samsung Electronics
Chanwoo Choi
Powered by blists - more mailing lists