[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231007140053.1731245-6-davidwronek@gmail.com>
Date: Sat, 7 Oct 2023 15:58:29 +0200
From: David Wronek <davidwronek@...il.com>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
Bart Van Assche <bvanassche@....org>,
Joe Mason <buddyjojo06@...look.com>
Cc: cros-qcom-dts-watchers@...omium.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org, linux-scsi@...r.kernel.org,
hexdump0815@...glemail.com, ~postmarketos/upstreaming@...ts.sr.ht,
phone-devel@...r.kernel.org, David Wronek <davidwronek@...il.com>
Subject: [PATCH 5/7] arm64: dts: qcom: sc7180: Add UFS nodes
Add the UFS and QMP PHY nodes for the Qualcomm SC7180 SoC.
Signed-off-by: David Wronek <davidwronek@...il.com>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 70 ++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 11f353d416b4..9f18be4fd61a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1532,6 +1532,76 @@ mmss_noc: interconnect@...0000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ ufs_mem_hc: ufshc@...4000 {
+ compatible = "qcom,sc7180-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>,
+ <0 0x01d90000 0 0x8000>;
+ reg-names = "std", "ice";
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <1>;
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ iommus = <&apps_smmu 0xa0 0x0>;
+
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "ice_core_clk";
+ clocks =
+ <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ freq-table-hz =
+ <50000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 300000000>;
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+ interconnect-names = "ufs-ddr", "cpu-ufs";
+
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@...7000 {
+ compatible = "qcom,sc7180-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0x1000>;
+
+ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ clock-names = "ref", "ref_aux";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
ipa: ipa@...0000 {
compatible = "qcom,sc7180-ipa";
--
2.42.0
Powered by blists - more mailing lists