linux-kernel - [PATCH v3 2/3] dt-bindings: clock: si5351: add PLL reset mode property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun,  8 Oct 2023 13:09:38 +0200
From:   Alvin Å ipraga <alvin@...s.dk>
To:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
         ipraga <alsi@...g-olufsen.dk>
Cc:     Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Rabeeh Khoury <rabeeh@...id-run.com>,
        Jacob Siverskog <jacob@...nage.engineering>,
        Sergej Sawazki <sergej@...dac.com>, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 2/3] dt-bindings: clock: si5351: add PLL reset mode property

From: Alvin Å ipraga <alsi@...g-olufsen.dk>

For applications where the PLL must be adjusted without glitches in the
clock output(s), a new silabs,pll-reset-mode property is added. It
can be used to specify whether or not the PLL should be reset after
adjustment. Resetting is known to cause glitches.

For compatibility with older device trees, it must be assumed that the
default PLL reset mode is to unconditionally reset after adjustment.

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc: Rabeeh Khoury <rabeeh@...id-run.com>
Cc: Jacob Siverskog <jacob@...nage.engineering>
Cc: Sergej Sawazki <sergej@...dac.com>
Signed-off-by: Alvin Å ipraga <alsi@...g-olufsen.dk>
---
 .../bindings/clock/silabs,si5351.yaml         | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.yaml b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
index 99c4e2271b6d..9a36d1f55c18 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
@@ -56,6 +56,27 @@ properties:
         - description: PLL source, XTAL (0) or CLKIN (1, Si5351C only).
           enum: [ 0, 1 ]
 
+  silabs,pll-reset-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    description: |
+      A list of cell pairs containing a PLL index and its reset mode.
+    items:
+      items:
+        - description: PLL A (0) or PLL B (1)
+          enum: [ 0, 1 ]
+        - description: |
+            Reset mode for the PLL. Mode can be one of:
+
+                0 - reset whenever PLL rate is adjusted (default mode)
+                1 - do not reset when PLL rate is adjusted
+
+            In mode 1, the PLL is only reset if the silabs,pll-reset is
+            specified in one of the clock output child nodes that also sources
+            the PLL. This mode may be preferable if output clocks are expected
+            to be adjusted without glitches.
+          enum: [ 0, 1 ]
+
 patternProperties:
   "^clkout@[0-7]$":
     type: object
@@ -198,6 +219,9 @@ examples:
         /* Use XTAL input as source of PLL0 and PLL1 */
         silabs,pll-source = <0 0>, <1 0>;
 
+        /* Don't reset PLL1 on rate adjustment */
+        silabs,pll-reset-mode = <1 1>;
+
         /*
          * Overwrite CLK0 configuration with:
          * - 8 mA output drive strength
-- 
2.42.0