| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231009183522.543918-8-javierm@redhat.com>
Date: Mon, 9 Oct 2023 20:34:21 +0200
From: Javier Martinez Canillas <javierm@...hat.com>
To: linux-kernel@...r.kernel.org
Cc: Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Javier Martinez Canillas <javierm@...hat.com>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
dri-devel@...ts.freedesktop.org
Subject: [PATCH 7/8] drm/ssd13xx: Add support for the SSD132x OLED controller family
The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327)
are used by 16 grayscale dot matrix OLED panels, extend the driver to also
support this chip family.
Signed-off-by: Javier Martinez Canillas <javierm@...hat.com>
---
drivers/gpu/drm/solomon/ssd13xx-i2c.c | 13 ++
drivers/gpu/drm/solomon/ssd13xx-spi.c | 13 ++
drivers/gpu/drm/solomon/ssd13xx.c | 206 +++++++++++++++++++++++++-
drivers/gpu/drm/solomon/ssd13xx.h | 5 +
4 files changed, 234 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/solomon/ssd13xx-i2c.c b/drivers/gpu/drm/solomon/ssd13xx-i2c.c
index d9cece374331..9cf78d206c6e 100644
--- a/drivers/gpu/drm/solomon/ssd13xx-i2c.c
+++ b/drivers/gpu/drm/solomon/ssd13xx-i2c.c
@@ -92,6 +92,19 @@ static const struct of_device_id ssd13xx_of_match[] = {
.compatible = "solomon,ssd1309fb-i2c",
.data = &ssd13xx_variants[SSD1309_ID],
},
+ /* ssd1302x family */
+ {
+ .compatible = "solomon,ssd1322",
+ .data = &ssd13xx_variants[SSD1322_ID],
+ },
+ {
+ .compatible = "solomon,ssd1325",
+ .data = &ssd13xx_variants[SSD1325_ID],
+ },
+ {
+ .compatible = "solomon,ssd1327",
+ .data = &ssd13xx_variants[SSD1327_ID],
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ssd13xx_of_match);
diff --git a/drivers/gpu/drm/solomon/ssd13xx-spi.c b/drivers/gpu/drm/solomon/ssd13xx-spi.c
index 2416756686cc..55162e49f037 100644
--- a/drivers/gpu/drm/solomon/ssd13xx-spi.c
+++ b/drivers/gpu/drm/solomon/ssd13xx-spi.c
@@ -129,6 +129,19 @@ static const struct of_device_id ssd13xx_of_match[] = {
.compatible = "solomon,ssd1309",
.data = &ssd13xx_variants[SSD1309_ID],
},
+ /* ssd1302x family */
+ {
+ .compatible = "solomon,ssd1322",
+ .data = &ssd13xx_variants[SSD1322_ID],
+ },
+ {
+ .compatible = "solomon,ssd1325",
+ .data = &ssd13xx_variants[SSD1325_ID],
+ },
+ {
+ .compatible = "solomon,ssd1327",
+ .data = &ssd13xx_variants[SSD1327_ID],
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ssd13xx_of_match);
diff --git a/drivers/gpu/drm/solomon/ssd13xx.c b/drivers/gpu/drm/solomon/ssd13xx.c
index b30224856518..bc53e7c80ffe 100644
--- a/drivers/gpu/drm/solomon/ssd13xx.c
+++ b/drivers/gpu/drm/solomon/ssd13xx.c
@@ -99,6 +99,24 @@
#define SSD130X_SET_AREA_COLOR_MODE_ENABLE 0x1e
#define SSD130X_SET_AREA_COLOR_MODE_LOW_POWER 0x05
+/* ssd132x commands */
+#define SSD132X_SET_COL_RANGE 0x15
+#define SSD132X_SET_DEACTIVATE_SCROLL 0x2e
+#define SSD132X_SET_ROW_RANGE 0x75
+#define SSD132X_SET_DISPLAY_START 0xa1
+#define SSD132X_SET_DISPLAY_OFFSET 0xa2
+#define SSD132X_SET_DISPLAY_NORMAL 0xa4
+#define SSD132X_SET_FUNCTION_SELECT_A 0xab
+#define SSD132X_SET_PHASE_LENGTH 0xb1
+#define SSD132X_SET_CLOCK_FREQ 0xb3
+#define SSD132X_SET_GPIO 0xb5
+#define SSD132X_SET_PRECHARGE_PERIOD 0xb6
+#define SSD132X_SET_GRAY_SCALE_TABLE 0xb8
+#define SSD132X_SELECT_DEFAULT_TABLE 0xb9
+#define SSD132X_SET_PRECHARGE_VOLTAGE 0xbc
+#define SSD130X_SET_VCOMH_VOLTAGE 0xbe
+#define SSD132X_SET_FUNCTION_SELECT_B 0xd5
+
#define MAX_CONTRAST 255
const struct ssd13xx_deviceinfo ssd13xx_variants[] = {
@@ -144,6 +162,22 @@ const struct ssd13xx_deviceinfo ssd13xx_variants[] = {
.default_width = 128,
.default_height = 64,
.family_id = SSD130X_FAMILY,
+ },
+ /* ssd132x family */
+ [SSD1322_ID] = {
+ .default_width = 480,
+ .default_height = 128,
+ .family_id = SSD132X_FAMILY,
+ },
+ [SSD1325_ID] = {
+ .default_width = 128,
+ .default_height = 80,
+ .family_id = SSD132X_FAMILY,
+ },
+ [SSD1327_ID] = {
+ .default_width = 128,
+ .default_height = 128,
+ .family_id = SSD132X_FAMILY,
}
};
EXPORT_SYMBOL_NS_GPL(ssd13xx_variants, DRM_SSD13XX);
@@ -610,6 +644,156 @@ static void ssd130x_clear_screen(struct ssd13xx_device *ssd13xx, u8 *data_array)
}
}
+static int ssd132x_init(struct ssd13xx_device *ssd13xx)
+{
+ int ret;
+
+ /* Set initial contrast */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD13XX_CONTRAST, 0x80);
+ if (ret < 0)
+ return ret;
+
+ /* Set column start and end */
+ ret = ssd13xx_write_cmd(ssd13xx, 3, SSD132X_SET_COL_RANGE, 0x00, ssd13xx->width / 2 - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Set row start and end */
+ ret = ssd13xx_write_cmd(ssd13xx, 3, SSD132X_SET_ROW_RANGE, 0x00, ssd13xx->height - 1);
+ if (ret < 0)
+ return ret;
+ /*
+ * Horizontal Address Increment
+ * Re-map for Column Address, Nibble and COM
+ * COM Split Odd Even
+ */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD13XX_SET_SEG_REMAP, 0x53);
+ if (ret < 0)
+ return ret;
+
+ /* Set display start and offset */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD132X_SET_DISPLAY_START, 0x00);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD132X_SET_DISPLAY_OFFSET, 0x00);
+ if (ret < 0)
+ return ret;
+
+ /* Set display mode normal */
+ ret = ssd13xx_write_cmd(ssd13xx, 1, SSD132X_SET_DISPLAY_NORMAL);
+ if (ret < 0)
+ return ret;
+
+ /* Set multiplex ratio value */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD13XX_SET_MULTIPLEX_RATIO, ssd13xx->height - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Set phase length */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD132X_SET_PHASE_LENGTH, 0x55);
+ if (ret < 0)
+ return ret;
+
+ /* Select default linear gray scale table */
+ ret = ssd13xx_write_cmd(ssd13xx, 1, SSD132X_SELECT_DEFAULT_TABLE);
+ if (ret < 0)
+ return ret;
+
+ /* Set clock frequency */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD132X_SET_CLOCK_FREQ, 0x01);
+ if (ret < 0)
+ return ret;
+
+ /* Enable internal VDD regulator */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD132X_SET_FUNCTION_SELECT_A, 0x1);
+ if (ret < 0)
+ return ret;
+
+ /* Set pre-charge period */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD132X_SET_PRECHARGE_PERIOD, 0x01);
+ if (ret < 0)
+ return ret;
+
+ /* Set pre-charge voltage */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD132X_SET_PRECHARGE_VOLTAGE, 0x08);
+ if (ret < 0)
+ return ret;
+
+ /* Set VCOMH voltage */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD130X_SET_VCOMH_VOLTAGE, 0x07);
+ if (ret < 0)
+ return ret;
+
+ /* Enable second pre-charge and internal VSL */
+ ret = ssd13xx_write_cmd(ssd13xx, 2, SSD132X_SET_FUNCTION_SELECT_B, 0x62);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int ssd132x_update_rect(struct ssd13xx_device *ssd13xx,
+ struct drm_rect *rect, u8 *buf,
+ u8 *data_array)
+{
+ unsigned int x = rect->x1 / 2;
+ unsigned int y = rect->y1;
+ unsigned int width = drm_rect_width(rect);
+ unsigned int height = drm_rect_height(rect);
+ unsigned int columns = DIV_ROUND_UP(width, 2);
+ unsigned int rows = height;
+ u32 array_idx = 0;
+ int ret, i, j;
+
+ /*
+ * The screen is divided in Segment and Common outputs, where
+ * COM0 to COM[N - 1] are the rows and SEG0 to SEG[M - 1] are
+ * the columns.
+ *
+ * Each Segment has a 4-bit pixel and each Common output has a
+ * row of pixels. When using the (default) horizontal address
+ * increment mode, each byte of data sent to the controller has
+ * two Segments (e.g: SEG0 and SEG1) that are stored in the lower
+ * and higher nibbles of a single byte representing one column.
+ * That is, the first byte are SEG0 (D0[3:0]) and SEG1 (D0[7:4]),
+ * the second byte are SEG2 (D1[3:0]) and SEG3 (D1[7:4]) and so on.
+ */
+
+ /* Set column start and end */
+ ret = ssd13xx_write_cmd(ssd13xx, 3, SSD132X_SET_COL_RANGE, x, columns - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Set row start and end */
+ ret = ssd13xx_write_cmd(ssd13xx, 3, SSD132X_SET_ROW_RANGE, y, rows - 1);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < height; i++) {
+ /* Process pair of pixels and combine them into a single byte */
+ for (j = 0; j < width; j += 2) {
+ u8 n1 = buf[i * width + j];
+ u8 n2 = buf[i * width + j + 1];
+
+ data_array[array_idx++] = (n2 << 4) | n1;
+ }
+ }
+
+ /* Write out update in one go since horizontal addressing mode is used */
+ ret = ssd13xx_write_data(ssd13xx, data_array, columns * rows);
+
+ return ret;
+}
+
+static void ssd132x_clear_screen(struct ssd13xx_device *ssd13xx, u8 *data_array)
+{
+ memset(data_array, 0, ssd13xx->data_array_size);
+
+ /* Write out update in one go since horizontal addressing mode is used */
+ ssd13xx_write_data(ssd13xx, data_array, ssd13xx->data_array_size);
+}
+
static const struct ssd13xx_funcs ssd13xx_family_funcs[] = {
[SSD130X_FAMILY] = {
.init = ssd130x_init,
@@ -617,6 +801,12 @@ static const struct ssd13xx_funcs ssd13xx_family_funcs[] = {
.clear_screen = ssd130x_clear_screen,
.fmt_convert = drm_fb_xrgb8888_to_mono,
},
+ [SSD132X_FAMILY] = {
+ .init = ssd132x_init,
+ .update_rect = ssd132x_update_rect,
+ .clear_screen = ssd132x_clear_screen,
+ .fmt_convert = drm_fb_xrgb8888_to_gray8,
+ }
};
static int ssd13xx_fb_blit_rect(struct drm_framebuffer *fb,
@@ -631,9 +821,12 @@ static int ssd13xx_fb_blit_rect(struct drm_framebuffer *fb,
unsigned int dst_pitch;
int ret = 0;
- /* Align y to display page boundaries */
- rect->y1 = round_down(rect->y1, SSD130X_PAGE_HEIGHT);
- rect->y2 = min_t(unsigned int, round_up(rect->y2, SSD130X_PAGE_HEIGHT), ssd13xx->height);
+ if (ssd13xx->device_info->family_id == SSD130X_FAMILY) {
+ /* Align y to display page boundaries */
+ rect->y1 = round_down(rect->y1, SSD130X_PAGE_HEIGHT);
+ rect->y2 = min_t(unsigned int, round_up(rect->y2, SSD130X_PAGE_HEIGHT),
+ ssd13xx->height);
+ }
dst_pitch = drm_format_info_min_pitch(fi, 0, drm_rect_width(rect));
@@ -1217,6 +1410,13 @@ static int ssd13xx_set_buffer_sizes(struct ssd13xx_device *ssd13xx,
fi = drm_format_info(DRM_FORMAT_R1);
break;
+ case SSD132X_FAMILY:
+ unsigned int columns = DIV_ROUND_UP(ssd13xx->width, 2);
+ unsigned int rows = ssd13xx->height;
+
+ ssd13xx->data_array_size = columns * rows;
+
+ fi = drm_format_info(DRM_FORMAT_R8);
}
if (!fi)
diff --git a/drivers/gpu/drm/solomon/ssd13xx.h b/drivers/gpu/drm/solomon/ssd13xx.h
index 399b0c8b5680..58083c7e08c8 100644
--- a/drivers/gpu/drm/solomon/ssd13xx.h
+++ b/drivers/gpu/drm/solomon/ssd13xx.h
@@ -27,6 +27,7 @@
enum ssd13xx_family_ids {
SSD130X_FAMILY,
+ SSD132X_FAMILY,
};
enum ssd13xx_variants {
@@ -36,6 +37,10 @@ enum ssd13xx_variants {
SSD1306_ID,
SSD1307_ID,
SSD1309_ID,
+ /* ssd132x family */
+ SSD1322_ID,
+ SSD1325_ID,
+ SSD1327_ID,
NR_SSD13XX_VARIANTS
};
--
2.41.0
Powered by blists - more mailing lists