[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20231009-upstream_csi-v10-12-330aaed24c5d@ti.com>
Date: Mon, 9 Oct 2023 18:39:38 +0530
From: Jai Luthra <j-luthra@...com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
CC: <linux-media@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
<niklas.soderlund+renesas@...natech.se>,
Benoit Parrot <bparrot@...com>,
Vaishnav Achath <vaishnav.a@...com>,
Vignesh Raghavendra <vigneshr@...com>, <nm@...com>,
<devarsht@...com>, <j-luthra@...com>, <a-bhatia1@...com>,
Martyn Welch <martyn.welch@...labora.com>,
Julien Massot <julien.massot@...labora.com>
Subject: [PATCH v10 12/13] media: dt-bindings: Add TI J721E CSI2RX
From: Pratyush Yadav <p.yadav@...com>
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.
Signed-off-by: Pratyush Yadav <p.yadav@...com>
Tested-by: Julien Massot <julien.massot@...labora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Reviewed-by: Rob Herring <robh@...nel.org>
Signed-off-by: Jai Luthra <j-luthra@...com>
---
.../bindings/media/ti,j721e-csi2rx-shim.yaml | 100 +++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
new file mode 100644
index 000000000000..f762fdc05e4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E CSI2RX Shim
+
+description: |
+ The TI J721E CSI2RX Shim is a wrapper around Cadence CSI2RX bridge that
+ enables sending captured frames to memory over PSI-L DMA. In the J721E
+ Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the
+ CSI_RX_IF section.
+
+maintainers:
+ - Jai Luthra <j-luthra@...com>
+
+properties:
+ compatible:
+ const: ti,j721e-csi2rx-shim
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ items:
+ - const: rx0
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ranges: true
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+patternProperties:
+ "^csi-bridge@":
+ type: object
+ description: CSI2 bridge node.
+ $ref: cdns,csi2rx.yaml#
+
+required:
+ - compatible
+ - reg
+ - dmas
+ - dma-names
+ - power-domains
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ ti_csi2rx0: ticsi2rx@...0000 {
+ compatible = "ti,j721e-csi2rx-shim";
+ dmas = <&main_udmap 0x4940>;
+ dma-names = "rx0";
+ reg = <0x4500000 0x1000>;
+ power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cdns_csi2rx: csi-bridge@...4000 {
+ compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+ reg = <0x4504000 0x1000>;
+ clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
+ <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+
+ reg = <0>;
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+ };
--
2.42.0
Powered by blists - more mailing lists