linux-kernel - Re: [PATCH 5/7] ARM: dts: aspeed: mtmitchell: Add inlet temperature sensor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CACPK8Xcs_4G0nSeKm2+hjSrp=SBb1MJrCob+EQ1emfVOijSOjw@mail.gmail.com>
Date:   Wed, 11 Oct 2023 12:21:09 +1030
From:   Joel Stanley <joel@....id.au>
To:     Chanh Nguyen <chanh@...amperecomputing.com>
Cc:     OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Andrew Jeffery <andrew@...id.au>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 5/7] ARM: dts: aspeed: mtmitchell: Add inlet temperature sensor

On Thu, 5 Oct 2023 at 14:26, Chanh Nguyen <chanh@...amperecomputing.com> wrote:
>
> Add the inlet temperature at address 0x48, which is connected
> via BMC I2C8.
>
> Signed-off-by: Chanh Nguyen <chanh@...amperecomputing.com>

Reviewed-by: Joel Stanley <joel@....id.au>

> ---
>  arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> index 88693c2b2dbe..c676172f0dbf 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> @@ -510,6 +510,11 @@
>  &i2c8 {
>         status = "okay";
>
> +       temperature-sensor@48 {
> +               compatible = "ti,tmp112";
> +               reg = <0x48>;
> +       };
> +
>         gpio@77 {
>                 compatible = "nxp,pca9539";
>                 reg = <0x77>;
> --
> 2.17.1
>