[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <202310120921.08062349C7@keescook>
Date: Thu, 12 Oct 2023 09:21:28 -0700
From: Kees Cook <keescook@...omium.org>
To: "Gustavo A. R. Silva" <gustavoars@...nel.org>
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-hardening@...r.kernel.org
Subject: Re: [PATCH 1/2][next] clk: visconti: Fix undefined behavior bug in
struct visconti_pll_provider
On Wed, Oct 11, 2023 at 08:17:36PM -0600, Gustavo A. R. Silva wrote:
> `struct clk_hw_onecell_data` is a flexible structure, which means that
> it contains flexible-array member at the bottom, in this case array
> `hws`:
>
> include/linux/clk-provider.h:
> 1380 struct clk_hw_onecell_data {
> 1381 unsigned int num;
> 1382 struct clk_hw *hws[] __counted_by(num);
> 1383 };
>
> This could potentially lead to an overwrite of the objects following
> `clk_data` in `struct visconti_pll_provider`, in this case
> `struct device_node *node;`, at run-time:
>
> drivers/clk/visconti/pll.h:
> 16 struct visconti_pll_provider {
> 17 void __iomem *reg_base;
> 18 struct clk_hw_onecell_data clk_data;
> 19 struct device_node *node;
> 20 };
>
> Notice that a total of 56 bytes are allocated for flexible-array `hws`
> at line 328. See below:
>
> include/dt-bindings/clock/toshiba,tmpv770x.h:
> 14 #define TMPV770X_NR_PLL 7
>
> drivers/clk/visconti/pll-tmpv770x.c:
> 69 ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL);
>
> drivers/clk/visconti/pll.c:
> 321 struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np,
> 322 void __iomem *base,
> 323 unsigned long nr_plls)
> 324 {
> 325 struct visconti_pll_provider *ctx;
> ...
> 328 ctx = kzalloc(struct_size(ctx, clk_data.hws, nr_plls), GFP_KERNEL);
>
> `struct_size(ctx, clk_data.hws, nr_plls)` above translates to
> sizeof(struct visconti_pll_provider) + sizeof(struct clk_hw *) * 7 ==
> 24 + 8 * 7 == 24 + 56
> ^^^^
> |
> allocated bytes for flex array `hws`
>
> $ pahole -C visconti_pll_provider drivers/clk/visconti/pll.o
> struct visconti_pll_provider {
> void * reg_base; /* 0 8 */
> struct clk_hw_onecell_data clk_data; /* 8 8 */
> struct device_node * node; /* 16 8 */
>
> /* size: 24, cachelines: 1, members: 3 */
> /* last cacheline: 24 bytes */
> };
>
> And then, after the allocation, some data is written into all members
> of `struct visconti_pll_provider`:
>
> 332 for (i = 0; i < nr_plls; ++i)
> 333 ctx->clk_data.hws[i] = ERR_PTR(-ENOENT);
> 334
> 335 ctx->node = np;
> 336 ctx->reg_base = base;
> 337 ctx->clk_data.num = nr_plls;
>
> Fix all these by placing the declaration of object `clk_data` at the
> end of `struct visconti_pll_provider`. Also, add a comment to make it
> clear that this object must always be last in the structure, and
> prevent this bug from being introduced again in the future.
>
> Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
> Cc: stable@...r.kernel.org
> Signed-off-by: Gustavo A. R. Silva <gustavoars@...nel.org>
Another good catch. :)
Reviewed-by: Kees Cook <keescook@...omium.org>
--
Kees Cook
Powered by blists - more mailing lists