| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <502135a8-6e82-4361-b0fc-e683694ca2cd@quicinc.com>
Date: Thu, 12 Oct 2023 22:33:28 +0530
From: Rohit Agarwal <quic_rohiagar@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Greg KH <gregkh@...uxfoundation.org>, <vkoul@...nel.org>
CC: Stephen Rothwell <sfr@...b.auug.org.au>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Next Mailing List <linux-next@...r.kernel.org>
Subject: Re: linux-next: build failure after merge of the usb tree
On 10/9/2023 3:19 PM, Dmitry Baryshkov wrote:
> On Mon, 9 Oct 2023 at 12:48, Greg KH <gregkh@...uxfoundation.org> wrote:
>> On Mon, Oct 09, 2023 at 02:48:27PM +0530, Rohit Agarwal wrote:
>>> On 10/4/2023 6:16 PM, Greg KH wrote:
>>>> On Wed, Oct 04, 2023 at 12:17:27PM +0530, Rohit Agarwal wrote:
>>>>> On 10/4/2023 12:13 PM, Greg KH wrote:
>>>>>> On Wed, Oct 04, 2023 at 01:22:47PM +1100, Stephen Rothwell wrote:
>>>>>>> Hi all,
>>>>>>>
>>>>>>> After merging the usb tree, today's linux-next build (x86_64 allmodconfig)
>>>>>>> failed like this:
>>>>>>>
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:156:43: error: 'QPHY_V6_PCS_SW_RESET' undeclared here (not in a function); did you mean 'QPHY_V2_PCS_SW_RESET'?
>>>>>>> 156 | [QPHY_SW_RESET] = QPHY_V6_PCS_SW_RESET,
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~
>>>>>>> | QPHY_V2_PCS_SW_RESET
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:157:43: error: 'QPHY_V6_PCS_START_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_START_CONTROL'?
>>>>>>> 157 | [QPHY_START_CTRL] = QPHY_V6_PCS_START_CONTROL,
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> | QPHY_V3_PCS_START_CONTROL
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:158:43: error: 'QPHY_V6_PCS_PCS_STATUS1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_PCS_STATUS1'?
>>>>>>> 158 | [QPHY_PCS_STATUS] = QPHY_V6_PCS_PCS_STATUS1,
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> | QPHY_V5_PCS_PCS_STATUS1
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:159:43: error: 'QPHY_V6_PCS_POWER_DOWN_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_POWER_DOWN_CONTROL'?
>>>>>>> 159 | [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V6_PCS_POWER_DOWN_CONTROL,
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> | QPHY_V3_PCS_POWER_DOWN_CONTROL
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:162:43: error: 'QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL'?
>>>>>>> 162 | [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> | QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:163:44: error: 'QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR'?
>>>>>>> 163 | [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> | QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:991:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG1'?
>>>>>>> 991 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:992:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_LOCK_DETECT_CONFIG2'?
>>>>>>> 992 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:993:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG3' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG3'?
>>>>>>> 993 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:994:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG6' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG6'?
>>>>>>> 994 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:997:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L'?
>>>>>>> 997 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:998:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H'?
>>>>>>> 998 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:999:26: error: 'QPHY_V6_PCS_CDR_RESET_TIME' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_CDR_RESET_TIME'?
>>>>>>> 999 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1000:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG1'?
>>>>>>> 1000 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1001:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG2'?
>>>>>>> 1001 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1003:26: error: 'QPHY_V6_PCS_EQ_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG1'?
>>>>>>> 1003 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1004:26: error: 'QPHY_V6_PCS_EQ_CONFIG5' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG5'?
>>>>>>> 1004 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1008:26: error: 'QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL'?
>>>>>>> 1008 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1009:26: error: 'QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2'?
>>>>>>> 1009 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1010:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L'?
>>>>>>> 1010 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1011:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H'?
>>>>>>> 1011 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
>>>>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>>>>> 78 | .offset = o, \
>>>>>>> | ^
>>>>>>>
>>>>>>> Caused by commit
>>>>>>>
>>>>>>> 685dbd1b2306 ("phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support")
>>>>>>>
>>>>>>> I have used the usb tree from next-20231003 for today.
>>>>>> Thanks, I've now reverted this from my tree.
>>>>> As mentioned in the cover letter of these changes, the series was dependent
>>>>> on the other submitted series [1], [2].
>>>> Ah, I missed that, I almost never read cover letters :)
>>>>
>>>>> Can you also pick these series [1], [2] to resolve this build failures.
>>>>> [1] https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>>>>> [2] https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
>>>> How about you just send this change with these others, or all of them as
>>>> one big series so they can be applied in the proper order?
>>> Adding Dmitry as well.
>>>
>>> I see some of the dependent patches are already applied and the patches from
>>> [2] are not.
>>> Since all the rest dependent changes are already applied,
>>> you can pick series[2] and then this series that should also be fine.
>>> Please let me know if this is fine?
>> What is "this" series? I don't have any of these in my inbox at all
>> anymore, sorry. Please resend the pending patches that need to be
>> applied to my usb tree and I will be glad to do so.
> Actually, I wonder why the PHY patches were merged through the USB
> tree, maybe that is the issue here.
Yes Actually these patches needs to go via phy tree. Can you please drop
patch 1/5, 2/5 and 5/5
from the series [3] (keeping [1] and [2] same reference from above to
avoid confusion).
[3]
https://lore.kernel.org/all/1695359525-4548-1-git-send-email-quic_rohiagar@quicinc.com/
At the same time requesting Vinod to please pick the patches 1/5, 2/5
and 5/5 from series [3] and series [2].
Thanks,
Rohit.
Powered by blists - more mailing lists