| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2921191.e9J7NaK4W3@kreacher>
Date: Thu, 12 Oct 2023 20:31:38 +0200
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Linux PM <linux-pm@...r.kernel.org>
Cc: LKML <linux-kernel@...r.kernel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Zhang Rui <rui.zhang@...el.com>,
Lukasz Luba <lukasz.luba@....com>
Subject: [PATCH v2 4/6] thermal: gov_power_allocator: Use trip pointers instead of trip indices
From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Modify the power allocator thermal governor to use trip pointers instead
of trip indices everywhere except for the power_allocator_throttle()
second argument that will be changed subsequently along with the
definition of the .throttle() governor callback.
The general functionality is not expected to be changed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
v1 -> v2: Eliminate redundant tz->num_trips check from
power_allocator_bind() (Daniel).
---
drivers/thermal/gov_power_allocator.c | 127 +++++++++++++---------------------
1 file changed, 49 insertions(+), 78 deletions(-)
Index: linux-pm/drivers/thermal/gov_power_allocator.c
===================================================================
--- linux-pm.orig/drivers/thermal/gov_power_allocator.c
+++ linux-pm/drivers/thermal/gov_power_allocator.c
@@ -16,8 +16,6 @@
#include "thermal_core.h"
-#define INVALID_TRIP -1
-
#define FRAC_BITS 10
#define int_to_frac(x) ((x) << FRAC_BITS)
#define frac_to_int(x) ((x) >> FRAC_BITS)
@@ -55,23 +53,23 @@ static inline s64 div_frac(s64 x, s64 y)
* @err_integral: accumulated error in the PID controller.
* @prev_err: error in the previous iteration of the PID controller.
* Used to calculate the derivative term.
+ * @sustainable_power: Sustainable power (heat) that this thermal zone can
+ * dissipate
* @trip_switch_on: first passive trip point of the thermal zone. The
* governor switches on when this trip point is crossed.
* If the thermal zone only has one passive trip point,
- * @trip_switch_on should be INVALID_TRIP.
+ * @trip_switch_on should be NULL.
* @trip_max_desired_temperature: last passive trip point of the thermal
* zone. The temperature we are
* controlling for.
- * @sustainable_power: Sustainable power (heat) that this thermal zone can
- * dissipate
*/
struct power_allocator_params {
bool allocated_tzp;
s64 err_integral;
s32 prev_err;
- int trip_switch_on;
- int trip_max_desired_temperature;
u32 sustainable_power;
+ const struct thermal_trip *trip_switch_on;
+ const struct thermal_trip *trip_max_desired_temperature;
};
/**
@@ -90,14 +88,12 @@ static u32 estimate_sustainable_power(st
u32 sustainable_power = 0;
struct thermal_instance *instance;
struct power_allocator_params *params = tz->governor_data;
- const struct thermal_trip *trip_max_desired_temperature =
- &tz->trips[params->trip_max_desired_temperature];
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
struct thermal_cooling_device *cdev = instance->cdev;
u32 min_power;
- if (instance->trip != trip_max_desired_temperature)
+ if (instance->trip != params->trip_max_desired_temperature)
continue;
if (!cdev_is_power_actor(cdev))
@@ -116,24 +112,22 @@ static u32 estimate_sustainable_power(st
* estimate_pid_constants() - Estimate the constants for the PID controller
* @tz: thermal zone for which to estimate the constants
* @sustainable_power: sustainable power for the thermal zone
- * @trip_switch_on: trip point number for the switch on temperature
+ * @trip_switch_on: trip point for the switch on temperature
* @control_temp: target temperature for the power allocator governor
*
* This function is used to update the estimation of the PID
* controller constants in struct thermal_zone_parameters.
*/
static void estimate_pid_constants(struct thermal_zone_device *tz,
- u32 sustainable_power, int trip_switch_on,
+ u32 sustainable_power,
+ const struct thermal_trip *trip_switch_on,
int control_temp)
{
- struct thermal_trip trip;
u32 temperature_threshold = control_temp;
- int ret;
s32 k_i;
- ret = __thermal_zone_get_trip(tz, trip_switch_on, &trip);
- if (!ret)
- temperature_threshold -= trip.temperature;
+ if (trip_switch_on)
+ temperature_threshold -= trip_switch_on->temperature;
/*
* estimate_pid_constants() tries to find appropriate default
@@ -386,7 +380,7 @@ static int allocate_power(struct thermal
struct thermal_instance *instance;
struct power_allocator_params *params = tz->governor_data;
const struct thermal_trip *trip_max_desired_temperature =
- &tz->trips[params->trip_max_desired_temperature];
+ params->trip_max_desired_temperature;
u32 *req_power, *max_power, *granted_power, *extra_actor_power;
u32 *weighted_req_power;
u32 total_req_power, max_allocatable_power, total_weighted_req_power;
@@ -496,7 +490,7 @@ static int allocate_power(struct thermal
}
/**
- * get_governor_trips() - get the number of the two trip points that are key for this governor
+ * get_governor_trips() - get the two trip points that are key for this governor
* @tz: thermal zone to operate on
* @params: pointer to private data for this governor
*
@@ -513,46 +507,36 @@ static int allocate_power(struct thermal
static void get_governor_trips(struct thermal_zone_device *tz,
struct power_allocator_params *params)
{
- int i, last_active, last_passive;
- bool found_first_passive;
-
- found_first_passive = false;
- last_active = INVALID_TRIP;
- last_passive = INVALID_TRIP;
-
- for (i = 0; i < tz->num_trips; i++) {
- struct thermal_trip trip;
- int ret;
-
- ret = __thermal_zone_get_trip(tz, i, &trip);
- if (ret) {
- dev_warn(&tz->device,
- "Failed to get trip point %d type: %d\n", i,
- ret);
- continue;
- }
-
- if (trip.type == THERMAL_TRIP_PASSIVE) {
- if (!found_first_passive) {
- params->trip_switch_on = i;
- found_first_passive = true;
- } else {
- last_passive = i;
+ const struct thermal_trip *first_passive = NULL;
+ const struct thermal_trip *last_passive = NULL;
+ const struct thermal_trip *last_active = NULL;
+ const struct thermal_trip *trip;
+
+ for_each_trip(tz, trip) {
+ switch (trip->type) {
+ case THERMAL_TRIP_PASSIVE:
+ if (!first_passive) {
+ first_passive = trip;
+ break;
}
- } else if (trip.type == THERMAL_TRIP_ACTIVE) {
- last_active = i;
- } else {
+ last_passive = trip;
+ break;
+ case THERMAL_TRIP_ACTIVE:
+ last_active = trip;
+ break;
+ default:
break;
}
}
- if (last_passive != INVALID_TRIP) {
+ if (last_passive) {
+ params->trip_switch_on = first_passive;
params->trip_max_desired_temperature = last_passive;
- } else if (found_first_passive) {
- params->trip_max_desired_temperature = params->trip_switch_on;
- params->trip_switch_on = INVALID_TRIP;
+ } else if (first_passive) {
+ params->trip_switch_on = NULL;
+ params->trip_max_desired_temperature = first_passive;
} else {
- params->trip_switch_on = INVALID_TRIP;
+ params->trip_switch_on = NULL;
params->trip_max_desired_temperature = last_active;
}
}
@@ -567,14 +551,12 @@ static void allow_maximum_power(struct t
{
struct thermal_instance *instance;
struct power_allocator_params *params = tz->governor_data;
- const struct thermal_trip *trip_max_desired_temperature =
- &tz->trips[params->trip_max_desired_temperature];
u32 req_power;
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
struct thermal_cooling_device *cdev = instance->cdev;
- if ((instance->trip != trip_max_desired_temperature) ||
+ if (instance->trip != params->trip_max_desired_temperature ||
(!cdev_is_power_actor(instance->cdev)))
continue;
@@ -636,7 +618,6 @@ static int power_allocator_bind(struct t
{
int ret;
struct power_allocator_params *params;
- struct thermal_trip trip;
ret = check_power_actors(tz);
if (ret)
@@ -661,13 +642,11 @@ static int power_allocator_bind(struct t
get_governor_trips(tz, params);
- if (tz->num_trips > 0) {
- ret = __thermal_zone_get_trip(tz, params->trip_max_desired_temperature,
- &trip);
- if (!ret)
- estimate_pid_constants(tz, tz->tzp->sustainable_power,
- params->trip_switch_on,
- trip.temperature);
+ if (params->trip_max_desired_temperature) {
+ int temp = params->trip_max_desired_temperature->temperature;
+
+ estimate_pid_constants(tz, tz->tzp->sustainable_power,
+ params->trip_switch_on, temp);
}
reset_pid_controller(params);
@@ -697,11 +676,10 @@ static void power_allocator_unbind(struc
tz->governor_data = NULL;
}
-static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_id)
+static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_index)
{
struct power_allocator_params *params = tz->governor_data;
- struct thermal_trip trip;
- int ret;
+ const struct thermal_trip *trip = &tz->trips[trip_index];
bool update;
lockdep_assert_held(&tz->lock);
@@ -710,12 +688,12 @@ static int power_allocator_throttle(stru
* We get called for every trip point but we only need to do
* our calculations once
*/
- if (trip_id != params->trip_max_desired_temperature)
+ if (trip != params->trip_max_desired_temperature)
return 0;
- ret = __thermal_zone_get_trip(tz, params->trip_switch_on, &trip);
- if (!ret && (tz->temperature < trip.temperature)) {
- update = (tz->last_temperature >= trip.temperature);
+ trip = params->trip_switch_on;
+ if (trip && tz->temperature < trip->temperature) {
+ update = tz->last_temperature >= trip->temperature;
tz->passive = 0;
reset_pid_controller(params);
allow_maximum_power(tz, update);
@@ -724,14 +702,7 @@ static int power_allocator_throttle(stru
tz->passive = 1;
- ret = __thermal_zone_get_trip(tz, params->trip_max_desired_temperature, &trip);
- if (ret) {
- dev_warn(&tz->device, "Failed to get the maximum desired temperature: %d\n",
- ret);
- return ret;
- }
-
- return allocate_power(tz, trip.temperature);
+ return allocate_power(tz, params->trip_max_desired_temperature->temperature);
}
static struct thermal_governor thermal_gov_power_allocator = {
Powered by blists - more mailing lists