linux-kernel - [PATCH v6 0/3] usb: ChipIdea: add Nuvoton NPCM UDC support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231012230057.3365626-1-tmaimon77@gmail.com>
Date:   Fri, 13 Oct 2023 02:00:54 +0300
From:   Tomer Maimon <tmaimon77@...il.com>
To:     <peter.chen@...nel.org>, <gregkh@...uxfoundation.org>,
        <avifishman70@...il.com>, <tali.perry1@...il.com>,
        <joel@....id.au>, <venture@...gle.com>, <yuenn@...gle.com>,
        <benjaminfair@...gle.com>, <j.neuschaefer@....net>
CC:     <openbmc@...ts.ozlabs.org>, <linux-usb@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Tomer Maimon <tmaimon77@...il.com>
Subject: [PATCH v6 0/3] usb: ChipIdea: add Nuvoton NPCM UDC support

This patch set add USB device controller for the NPCM Baseboard
Management Controllers (BMC).

NPCM UDC driver is a part of the USB ChipIdea driver.

Adding CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag to modify the vbus_active
parameter to active in case the ChipIdea USB IP role is device-only and
there is no otgsc register.

BMC NPCM7XX and BMC NPCM8XX has ten identical NPCM UDC modules,

The NPCM UDC were tested on NPCM845 evaluation board.

Addressed comments from:
 - Krzysztof Kozlowski : https://www.spinics.net/lists/devicetree/msg639032.html

Changes since version 5:
 - Remove unnecessary npcm845-udc compatible.

Changes since version 4:
 - Modify npcm845-udc compatible.

Changes since version 3:
 - Add Acked-by Peter Chen.
 
Changes since version 2:
 - Use dev_err_probe.
 - Remove MODULE_ALIAS.

Changes since version 1:
 - Add SoC specific compatible.
 - Remove USB phy mux property from dt-binding, will be handled differently.
 - Add CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS commit to this patch set.

Tomer Maimon (3):
  usb: chipidea: add CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag
  dt-bindings: usb: ci-hdrc-usb2: add npcm750 and npcm845 compatible
  usb: chipidea: Add support for NPCM

 .../devicetree/bindings/usb/ci-hdrc-usb2.yaml |   6 +
 drivers/usb/chipidea/Kconfig                  |   4 +
 drivers/usb/chipidea/Makefile                 |   1 +
 drivers/usb/chipidea/ci_hdrc_npcm.c           | 114 ++++++++++++++++++
 drivers/usb/chipidea/otg.c                    |   5 +-
 include/linux/usb/chipidea.h                  |   1 +
 6 files changed, 130 insertions(+), 1 deletion(-)
 create mode 100644 drivers/usb/chipidea/ci_hdrc_npcm.c

-- 
2.33.0