| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231013034808.8948-3-jagathjog1996@gmail.com>
Date: Fri, 13 Oct 2023 09:18:08 +0530
From: Jagath Jog J <jagathjog1996@...il.com>
To: jic23@...nel.org, andriy.shevchenko@...ux.intel.com,
u.kleine-koenig@...gutronix.de, lars@...afoo.de,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
linus.walleij@...aro.org
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/2] iio: imu: Add driver for BMI323 IMU
The Bosch BMI323 is a 6-axis low-power IMU that provide measurements for
acceleration, angular rate, and temperature. This sensor includes
motion-triggered interrupt features, such as a step counter, tap detection,
and activity/inactivity interrupt capabilities.
The driver supports various functionalities, including data ready, FIFO
data handling, and events such as tap detection, step counting, and
activity interrupts.
Signed-off-by: Jagath Jog J <jagathjog1996@...il.com>
---
Documentation/ABI/testing/sysfs-bus-iio | 18 +
MAINTAINERS | 7 +
drivers/iio/imu/Kconfig | 1 +
drivers/iio/imu/Makefile | 1 +
drivers/iio/imu/bmi323/Kconfig | 33 +
drivers/iio/imu/bmi323/Makefile | 7 +
drivers/iio/imu/bmi323/bmi323.h | 209 +++
drivers/iio/imu/bmi323/bmi323_core.c | 2139 +++++++++++++++++++++++
drivers/iio/imu/bmi323/bmi323_i2c.c | 121 ++
drivers/iio/imu/bmi323/bmi323_spi.c | 92 +
10 files changed, 2628 insertions(+)
create mode 100644 drivers/iio/imu/bmi323/Kconfig
create mode 100644 drivers/iio/imu/bmi323/Makefile
create mode 100644 drivers/iio/imu/bmi323/bmi323.h
create mode 100644 drivers/iio/imu/bmi323/bmi323_core.c
create mode 100644 drivers/iio/imu/bmi323/bmi323_i2c.c
create mode 100644 drivers/iio/imu/bmi323/bmi323_spi.c
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 19cde14f3869..c66fc560ee4b 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -2254,3 +2254,21 @@ Description:
If a label is defined for this event add that to the event
specific attributes. This is useful for userspace to be able to
better identify an individual event.
+
+What: /sys/.../events/in_accel_gesture_tap_wait_timeout
+KernelVersion: 6.7
+Contact: linux-iio@...r.kernel.org
+Description:
+ Enable tap gesture confirmation with timeout.
+
+What: /sys/.../events/in_accel_gesture_tap_wait_dur
+KernelVersion: 6.7
+Contact: linux-iio@...r.kernel.org
+Description:
+ Timeout value for tap gesture confirmation.
+
+What: /sys/.../events/in_accel_gesture_tap_wait_dur_available
+KernelVersion: 6.7
+Contact: linux-iio@...r.kernel.org
+Description:
+ List of available timeout value for tap gesture confirmation.
diff --git a/MAINTAINERS b/MAINTAINERS
index 4e07c032d06a..47ca415212a7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3595,6 +3595,13 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
F: drivers/iio/accel/bma400*
+BOSCH SENSORTEC BMI323 IMU IIO DRIVER
+M: Jagath Jog J <jagathjog1996@...il.com>
+L: linux-iio@...r.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/imu/bosch,bma400.yaml
+F: drivers/iio/imu/bmi323/
+
BPF JIT for ARM
M: Shubham Bansal <illusionist.neo@...il.com>
L: bpf@...r.kernel.org
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index c2f97629e9cd..6c9a85294bc1 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -54,6 +54,7 @@ config ADIS16480
source "drivers/iio/imu/bmi160/Kconfig"
source "drivers/iio/imu/bno055/Kconfig"
+source "drivers/iio/imu/bmi323/Kconfig"
config FXOS8700
tristate
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index 6eb612034722..627406476357 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
obj-y += bmi160/
obj-y += bno055/
+obj-y += bmi323/
obj-$(CONFIG_FXOS8700) += fxos8700_core.o
obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
diff --git a/drivers/iio/imu/bmi323/Kconfig b/drivers/iio/imu/bmi323/Kconfig
new file mode 100644
index 000000000000..ab37b285393c
--- /dev/null
+++ b/drivers/iio/imu/bmi323/Kconfig
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# BMI323 IMU driver
+#
+
+config BMI323
+ tristate
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+
+config BMI323_I2C
+ tristate "Bosch BMI323 I2C driver"
+ depends on I2C
+ select BMI323
+ select REGMAP_I2C
+ help
+ Enable support for the Bosch BMI323 6-Axis IMU connected to I2C
+ interface.
+
+ This driver can also be built as a module. If so, the module will be
+ called bmi323_i2c.
+
+config BMI323_SPI
+ tristate "Bosch BMI323 SPI driver"
+ depends on SPI
+ select BMI323
+ select REGMAP_SPI
+ help
+ Enable support for the Bosch BMI323 6-Axis IMU connected to SPI
+ interface.
+
+ This driver can also be built as a module. If so, the module will be
+ called bmi323_spi.
diff --git a/drivers/iio/imu/bmi323/Makefile b/drivers/iio/imu/bmi323/Makefile
new file mode 100644
index 000000000000..a6a6dc0207c9
--- /dev/null
+++ b/drivers/iio/imu/bmi323/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Bosch BMI323 IMU
+#
+obj-$(CONFIG_BMI323) += bmi323_core.o
+obj-$(CONFIG_BMI323_I2C) += bmi323_i2c.o
+obj-$(CONFIG_BMI323_SPI) += bmi323_spi.o
diff --git a/drivers/iio/imu/bmi323/bmi323.h b/drivers/iio/imu/bmi323/bmi323.h
new file mode 100644
index 000000000000..dff126d41658
--- /dev/null
+++ b/drivers/iio/imu/bmi323/bmi323.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * IIO driver for Bosch BMI323 6-Axis IMU
+ *
+ * Copyright (C) 2023, Jagath Jog J <jagathjog1996@...il.com>
+ */
+
+#ifndef _BMI323_H_
+#define _BMI323_H_
+
+#include <linux/bits.h>
+#include <linux/regmap.h>
+#include <linux/units.h>
+
+#define BMI323_I2C_DUMMY 2
+#define BMI323_SPI_DUMMY 1
+
+/* Register map */
+
+#define BMI323_CHIP_ID_REG 0x00
+#define BMI323_CHIP_ID_VAL 0x0043
+#define BMI323_CHIP_ID_MSK GENMASK(7, 0)
+#define BMI323_ERR_REG 0x01
+#define BMI323_STATUS_REG 0x02
+#define BMI323_STATUS_POR_MSK BIT(0)
+
+/* Accelero/Gyro/Temp data registers */
+#define BMI323_ACCEL_X_REG 0x03
+#define BMI323_GYRO_X_REG 0x06
+#define BMI323_TEMP_REG 0x09
+#define BMI323_ALL_CHAN_MSK GENMASK(5, 0)
+
+/* Status registers */
+#define BMI323_STATUS_INT1_REG 0x0D
+#define BMI323_STATUS_INT2_REG 0x0E
+#define BMI323_STATUS_NOMOTION_MSK BIT(0)
+#define BMI323_STATUS_MOTION_MSK BIT(1)
+#define BMI323_STATUS_STP_WTR_MSK BIT(5)
+#define BMI323_STATUS_TAP_MSK BIT(8)
+#define BMI323_STATUS_ERROR_MSK BIT(10)
+#define BMI323_STATUS_TMP_DRDY_MSK BIT(11)
+#define BMI323_STATUS_GYR_DRDY_MSK BIT(12)
+#define BMI323_STATUS_ACC_DRDY_MSK BIT(13)
+#define BMI323_STATUS_ACC_GYR_DRDY_MSK GENMASK(13, 12)
+#define BMI323_STATUS_FIFO_WTRMRK_MSK BIT(14)
+#define BMI323_STATUS_FIFO_FULL_MSK BIT(15)
+
+/* Feature registers */
+#define BMI323_FEAT_IO0_REG 0x10
+#define BMI323_FEAT_IO0_XYZ_NOMOTION_MSK GENMASK(2, 0)
+#define BMI323_FEAT_IO0_XYZ_MOTION_MSK GENMASK(5, 3)
+#define BMI323_FEAT_XYZ_MSK GENMASK(2, 0)
+#define BMI323_FEAT_IO0_STP_CNT_MSK BIT(9)
+#define BMI323_FEAT_IO0_S_TAP_MSK BIT(12)
+#define BMI323_FEAT_IO0_D_TAP_MSK BIT(13)
+#define BMI323_FEAT_IO1_REG 0x11
+#define BMI323_FEAT_IO1_ERR_MSK GENMASK(3, 0)
+#define BMI323_FEAT_IO2_REG 0x12
+#define BMI323_FEAT_IO_STATUS_REG 0x14
+#define BMI323_FEAT_IO_STATUS_MSK BIT(0)
+#define BMI323_FEAT_ENG_POLL 2000
+#define BMI323_FEAT_ENG_TIMEOUT 10000
+
+/* FIFO registers */
+#define BMI323_FIFO_FILL_LEVEL_REG 0x15
+#define BMI323_FIFO_DATA_REG 0x16
+
+/* Accelero/Gyro config registers */
+#define BMI323_ACC_CONF_REG 0x20
+#define BMI323_GYRO_CONF_REG 0x21
+#define BMI323_ACC_GYRO_CONF_MODE_MSK GENMASK(14, 12)
+#define BMI323_ACC_GYRO_CONF_ODR_MSK GENMASK(3, 0)
+#define BMI323_ACC_GYRO_CONF_SCL_MSK GENMASK(6, 4)
+#define BMI323_ACC_GYRO_CONF_BW_MSK BIT(7)
+#define BMI323_ACC_GYRO_CONF_AVG_MSK GENMASK(10, 8)
+
+/* FIFO registers */
+#define BMI323_FIFO_WTRMRK_REG 0x35
+#define BMI323_FIFO_CONF_REG 0x36
+#define BMI323_FIFO_CONF_STP_FUL_MSK BIT(0)
+#define BMI323_FIFO_CONF_ACC_GYR_EN_MSK GENMASK(10, 9)
+#define BMI323_FIFO_ACC_GYR_MSK GENMASK(1, 0)
+#define BMI323_FIFO_CTRL_REG 0x37
+#define BMI323_FIFO_FLUSH_MSK BIT(0)
+
+/* Interrupt pin config registers */
+#define BMI323_IO_INT_CTR_REG 0x38
+#define BMI323_IO_INT1_LVL_MSK BIT(0)
+#define BMI323_IO_INT1_OD_MSK BIT(1)
+#define BMI323_IO_INT1_OP_EN_MSK BIT(2)
+#define BMI323_IO_INT1_LVL_OD_OP_MSK GENMASK(2, 0)
+#define BMI323_IO_INT2_LVL_MSK BIT(8)
+#define BMI323_IO_INT2_OD_MSK BIT(9)
+#define BMI323_IO_INT2_OP_EN_MSK BIT(10)
+#define BMI323_IO_INT2_LVL_OD_OP_MSK GENMASK(10, 8)
+#define BMI323_IO_INT_CONF_REG 0x39
+#define BMI323_IO_INT_LTCH_MSK BIT(0)
+#define BMI323_INT_MAP1_REG 0x3A
+#define BMI323_INT_MAP2_REG 0x3B
+#define BMI323_NOMOTION_MSK GENMASK(1, 0)
+#define BMI323_MOTION_MSK GENMASK(3, 2)
+#define BMI323_STEP_CNT_MSK GENMASK(11, 10)
+#define BMI323_TAP_MSK GENMASK(1, 0)
+#define BMI323_TMP_DRDY_MSK GENMASK(7, 6)
+#define BMI323_GYR_DRDY_MSK GENMASK(9, 8)
+#define BMI323_ACC_DRDY_MSK GENMASK(11, 10)
+#define BMI323_FIFO_WTRMRK_MSK GENMASK(13, 12)
+#define BMI323_FIFO_FULL_MSK GENMASK(15, 14)
+
+/* Feature registers */
+#define BMI323_FEAT_CTRL_REG 0x40
+#define BMI323_FEAT_ENG_EN_MSK BIT(0)
+#define BMI323_FEAT_DATA_ADDR 0x41
+#define BMI323_FEAT_DATA_TX 0x42
+#define BMI323_FEAT_DATA_STATUS 0x43
+#define BMI323_FEAT_DATA_TX_RDY_MSK BIT(1)
+#define BMI323_FEAT_EVNT_EXT_REG 0x47
+#define BMI323_FEAT_EVNT_EXT_S_MSK BIT(3)
+#define BMI323_FEAT_EVNT_EXT_D_MSK BIT(4)
+
+#define BMI323_CMD_REG 0x7E
+#define BMI323_RST_VAL 0xDEAF
+#define BMI323_CFG_RES_REG 0x7F
+
+/* Extended registers */
+#define BMI323_GEN_SET1_REG 0x02
+#define BMI323_GEN_SET1_MODE_MSK BIT(0)
+#define BMI323_GEN_HOLD_DUR_MSK GENMASK(4, 1)
+
+/* Any Motion/No Motion config registers */
+#define BMI323_ANYMO1_REG 0x05
+#define BMI323_NOMO1_REG 0x08
+#define BMI323_MO2_OFFSET 0x01
+#define BMI323_MO3_OFFSET 0x02
+#define BMI323_MO1_REF_UP_MSK BIT(12)
+#define BMI323_MO1_SLOPE_TH_MSK GENMASK(11, 0)
+#define BMI323_MO2_HYSTR_MSK GENMASK(9, 0)
+#define BMI323_MO3_DURA_MSK GENMASK(12, 0)
+
+/* Step counter config registers */
+#define BMI323_STEP_SC1_REG 0x10
+#define BMI323_STEP_SC1_WTRMRK_MSK GENMASK(9, 0)
+#define BMI323_STEP_SC1_RST_CNT_MSK BIT(10)
+#define BMI323_STEP_SC1_REG 0x10
+#define BMI323_STEP_LEN 2
+
+/* Tap gesture config registers */
+#define BMI323_TAP1_REG 0x1E
+#define BMI323_TAP1_AXIS_SEL_MSK GENMASK(1, 0)
+#define BMI323_AXIS_XYZ_MSK GENMASK(1, 0)
+#define BMI323_TAP1_TIMOUT_MSK BIT(2)
+#define BMI323_TAP1_MAX_PEAKS_MSK GENMASK(5, 3)
+#define BMI323_TAP1_MODE_MSK GENMASK(7, 6)
+#define BMI323_TAP2_REG 0x1F
+#define BMI323_TAP2_THRES_MSK GENMASK(9, 0)
+#define BMI323_TAP2_MAX_DUR_MSK GENMASK(15, 10)
+#define BMI323_TAP3_REG 0x20
+#define BMI323_TAP3_QUIET_TIM_MSK GENMASK(15, 12)
+#define BMI323_TAP3_QT_BW_TAP_MSK GENMASK(11, 8)
+#define BMI323_TAP3_QT_AFT_GES_MSK GENMASK(15, 12)
+
+#define BMI323_MOTION_THRES_SCALE 512
+#define BMI323_MOTION_HYSTR_SCALE 512
+#define BMI323_MOTION_DURAT_SCALE 50
+#define BMI323_TAP_THRES_SCALE 512
+#define BMI323_DUR_BW_TAP_SCALE 200
+#define BMI323_QUITE_TIM_GES_SCALE 25
+#define BMI323_MAX_GES_DUR_SCALE 25
+
+/*
+ * The formula to calculate temperature in C.
+ * See datasheet section 6.1.1, Register Map Overview
+ *
+ * T_C = (temp_raw / 512) + 23
+ */
+#define BMI323_TEMP_OFFSET 11776
+#define BMI323_TEMP_SCALE 1953125
+
+/*
+ * The BMI323 features a FIFO with a capacity of 2048 bytes. Each frame
+ * consists of accelerometer (X, Y, Z) data and gyroscope (X, Y, Z) data,
+ * totaling 6 words or 12 bytes. The FIFO buffer can hold a total of
+ * 170 frames.
+ *
+ * If a watermark interrupt is configured for 170 frames, the interrupt will
+ * trigger when the FIFO reaches 169 frames, so limit the maximum watermark
+ * level to 169 frames. In terms of data, 169 frames would equal 1014 bytes,
+ * which is approximately 2 frames before the FIFO reaches its full capacity.
+ * See datasheet section 5.7.3 FIFO Buffer Interrupts
+ */
+#define BMI323_BYTES_PER_SAMPLE 2
+#define BMI323_FIFO_LENGTH_IN_BYTES 2048
+#define BMI323_FIFO_FRAME_LENGTH 6
+#define BMI323_FIFO_FULL_IN_FRAMES \
+ ((BMI323_FIFO_LENGTH_IN_BYTES / \
+ (BMI323_BYTES_PER_SAMPLE * BMI323_FIFO_FRAME_LENGTH)) - 1)
+#define BMI323_FIFO_FULL_IN_WORDS \
+ (BMI323_FIFO_FULL_IN_FRAMES * BMI323_FIFO_FRAME_LENGTH)
+
+#define BMI323_INT_MICRO_TO_RAW(val, val2, scale) ((val) * (scale) + \
+ ((val2) * (scale)) / MEGA)
+
+#define BMI323_RAW_TO_MICRO(raw, scale) ((((raw) % (scale)) * MEGA) / scale)
+
+struct device;
+int bmi323_core_probe(struct device *dev);
+extern const struct regmap_config bmi323_regmap_config;
+
+#endif
diff --git a/drivers/iio/imu/bmi323/bmi323_core.c b/drivers/iio/imu/bmi323/bmi323_core.c
new file mode 100644
index 000000000000..0bd5dedd9a63
--- /dev/null
+++ b/drivers/iio/imu/bmi323/bmi323_core.c
@@ -0,0 +1,2139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IIO core driver for Bosch BMI323 6-Axis IMU.
+ *
+ * Copyright (C) 2023, Jagath Jog J <jagathjog1996@...il.com>
+ *
+ * Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi323-ds000.pdf
+ */
+
+#include <linux/bitfield.h>
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/units.h>
+
+#include <asm/unaligned.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "bmi323.h"
+
+enum bmi323_sensor_type {
+ BMI323_ACCEL,
+ BMI323_GYRO,
+ BMI323_SENSORS_CNT,
+};
+
+enum bmi323_opr_mode {
+ ACC_GYRO_MODE_DISABLE = 0x00,
+ GYRO_DRIVE_MODE_ENABLED = 0x01,
+ ACC_GYRO_MODE_DUTYCYCLE = 0x03,
+ ACC_GYRO_MODE_CONTINOUS = 0x04,
+ ACC_GYRO_MODE_HIGH_PERF = 0x07,
+};
+
+enum bmi323_state {
+ BMI323_IDLE,
+ BMI323_BUFFER_DRDY_TRIGGERED,
+ BMI323_BUFFER_FIFO,
+};
+
+enum bmi323_irq_pin {
+ BMI323_IRQ_DISABLED,
+ BMI323_IRQ_INT1,
+ BMI323_IRQ_INT2,
+};
+
+enum bmi323_3db_bw {
+ BMI323_BW_ODR_BY_2,
+ BMI323_BW_ODR_BY_4,
+};
+
+enum bmi323_scan {
+ BMI323_ACCEL_X,
+ BMI323_ACCEL_Y,
+ BMI323_ACCEL_Z,
+ BMI323_GYRO_X,
+ BMI323_GYRO_Y,
+ BMI323_GYRO_Z,
+ BMI323_CHAN_MAX
+};
+
+struct bmi323_hw {
+ u8 data;
+ u8 config;
+ const int (*scale_table)[2];
+ int scale_table_len;
+};
+
+/*
+ * The accelerometer supports +-2G/4G/8G/16G ranges, and the resolution of
+ * each sample is 16 bits, signed.
+ * At +-8G the scale can calculated by
+ * ((8 + 8) * 9.80665 / (2^16 - 1)) * 10^6 = 2394.23819 scale in micro
+ *
+ */
+static const int bmi323_accel_scale[][2] = {
+ { 0, 598 },
+ { 0, 1197 },
+ { 0, 2394 },
+ { 0, 4788 },
+};
+
+static const int bmi323_gyro_scale[][2] = {
+ { 0, 66 },
+ { 0, 133 },
+ { 0, 266 },
+ { 0, 532 },
+ { 0, 1065 },
+};
+
+static const int bmi323_accel_gyro_avrg[] = {0, 2, 4, 8, 16, 32, 64};
+
+static const struct bmi323_hw bmi323_hw[2] = {
+ [BMI323_ACCEL] = {
+ .data = BMI323_ACCEL_X_REG,
+ .config = BMI323_ACC_CONF_REG,
+ .scale_table = bmi323_accel_scale,
+ .scale_table_len = ARRAY_SIZE(bmi323_accel_scale),
+ },
+ [BMI323_GYRO] = {
+ .data = BMI323_GYRO_X_REG,
+ .config = BMI323_GYRO_CONF_REG,
+ .scale_table = bmi323_gyro_scale,
+ .scale_table_len = ARRAY_SIZE(bmi323_gyro_scale),
+ },
+};
+
+struct bmi323_data {
+ struct device *dev;
+ struct regmap *regmap;
+ struct iio_mount_matrix orientation;
+ enum bmi323_irq_pin irq_pin;
+ struct iio_trigger *trig;
+ bool drdy_trigger_enabled;
+ enum bmi323_state state;
+ s64 fifo_tstamp, old_fifo_tstamp;
+ u32 odrns[BMI323_SENSORS_CNT];
+ u32 odrhz[BMI323_SENSORS_CNT];
+ unsigned int feature_events;
+
+ /*
+ * Lock to protect the members of device's private data from concurrent
+ * access and also to serialize the access of extended registers.
+ * See bmi323_write_ext_reg(..) for more info.
+ */
+ struct mutex mutex;
+ int watermark;
+ __le16 fifo_buff[BMI323_FIFO_FULL_IN_WORDS] __aligned(IIO_DMA_MINALIGN);
+ struct {
+ __le16 channels[BMI323_CHAN_MAX];
+ s64 ts __aligned(8);
+ } buffer;
+ __le16 steps_count[BMI323_STEP_LEN];
+};
+
+static const struct iio_mount_matrix *
+bmi323_get_mount_matrix(const struct iio_dev *idev,
+ const struct iio_chan_spec *chan)
+{
+ struct bmi323_data *data = iio_priv(idev);
+
+ return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info bmi323_ext_info[] = {
+ IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, bmi323_get_mount_matrix),
+ { }
+};
+
+static const struct iio_event_spec bmi323_step_wtrmrk_event = {
+ .type = IIO_EV_TYPE_CHANGE,
+ .dir = IIO_EV_DIR_NONE,
+ .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_VALUE),
+};
+
+static const struct iio_event_spec bmi323_accel_event[] = {
+ {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD) |
+ BIT(IIO_EV_INFO_HYSTERESIS) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
+ {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD) |
+ BIT(IIO_EV_INFO_HYSTERESIS) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
+ {
+ .type = IIO_EV_TYPE_GESTURE,
+ .dir = IIO_EV_DIR_SINGLETAP,
+ .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_RESET_TIMEOUT),
+ },
+ {
+ .type = IIO_EV_TYPE_GESTURE,
+ .dir = IIO_EV_DIR_DOUBLETAP,
+ .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_RESET_TIMEOUT) |
+ BIT(IIO_EV_INFO_TAP2_MIN_DELAY),
+ },
+};
+
+#define BMI323_ACCEL_CHANNEL(_type, _axis, _index) { \
+ .type = _type, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_type_available = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+ .ext_info = bmi323_ext_info, \
+ .event_spec = bmi323_accel_event, \
+ .num_event_specs = ARRAY_SIZE(bmi323_accel_event), \
+}
+
+#define BMI323_GYRO_CHANNEL(_type, _axis, _index) { \
+ .type = _type, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_type_available = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+ .ext_info = bmi323_ext_info, \
+}
+
+static const struct iio_chan_spec bmi323_channels[] = {
+ BMI323_ACCEL_CHANNEL(IIO_ACCEL, X, BMI323_ACCEL_X),
+ BMI323_ACCEL_CHANNEL(IIO_ACCEL, Y, BMI323_ACCEL_Y),
+ BMI323_ACCEL_CHANNEL(IIO_ACCEL, Z, BMI323_ACCEL_Z),
+ BMI323_GYRO_CHANNEL(IIO_ANGL_VEL, X, BMI323_GYRO_X),
+ BMI323_GYRO_CHANNEL(IIO_ANGL_VEL, Y, BMI323_GYRO_Y),
+ BMI323_GYRO_CHANNEL(IIO_ANGL_VEL, Z, BMI323_GYRO_Z),
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .scan_index = -1,
+ },
+ {
+ .type = IIO_STEPS,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_ENABLE),
+ .scan_index = -1,
+ .event_spec = &bmi323_step_wtrmrk_event,
+ .num_event_specs = 1,
+
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(BMI323_CHAN_MAX),
+};
+
+static const int bmi323_acc_gyro_odr[][2] = {
+ { 0, 781250 },
+ { 1, 562500 },
+ { 3, 125000 },
+ { 6, 250000 },
+ { 12, 500000 },
+ { 25, 0 },
+ { 50, 0 },
+ { 100, 0 },
+ { 200, 0 },
+ { 400, 0 },
+ { 800, 0 },
+};
+
+static const int bmi323_acc_gyro_odrns[] = {
+ 1280 * MEGA,
+ 640 * MEGA,
+ 320 * MEGA,
+ 160 * MEGA,
+ 80 * MEGA,
+ 40 * MEGA,
+ 20 * MEGA,
+ 10 * MEGA,
+ 5 * MEGA,
+ 2500 * KILO,
+ 1250 * KILO,
+};
+
+static enum bmi323_sensor_type bmi323_iio_to_sensor(enum iio_chan_type iio_type)
+{
+ switch (iio_type) {
+ case IIO_ACCEL:
+ return BMI323_ACCEL;
+ case IIO_ANGL_VEL:
+ return BMI323_GYRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bmi323_set_mode(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor,
+ enum bmi323_opr_mode mode)
+{
+ guard(mutex)(&data->mutex);
+ return regmap_update_bits(data->regmap, bmi323_hw[sensor].config,
+ BMI323_ACC_GYRO_CONF_MODE_MSK,
+ FIELD_PREP(BMI323_ACC_GYRO_CONF_MODE_MSK,
+ mode));
+}
+
+/*
+ * When writing data to extended register there must be no communication to
+ * any other register before write transaction is complete.
+ * See datasheet section 6.2 Extended Register Map Description.
+ */
+static int bmi323_write_ext_reg(struct bmi323_data *data, unsigned int ext_addr,
+ unsigned int ext_data)
+{
+ int ret, feature_status;
+
+ ret = regmap_read(data->regmap, BMI323_FEAT_DATA_STATUS,
+ &feature_status);
+ if (ret)
+ return ret;
+
+ if (!FIELD_GET(BMI323_FEAT_DATA_TX_RDY_MSK, feature_status))
+ return -EBUSY;
+
+ ret = regmap_write(data->regmap, BMI323_FEAT_DATA_ADDR, ext_addr);
+ if (ret)
+ return ret;
+
+ return regmap_write(data->regmap, BMI323_FEAT_DATA_TX, ext_data);
+}
+
+/*
+ * When reading data from extended register there must be no communication to
+ * any other register before read transaction is complete.
+ * See datasheet section 6.2 Extended Register Map Description.
+ */
+static int bmi323_read_ext_reg(struct bmi323_data *data, unsigned int ext_addr,
+ unsigned int *ext_data)
+{
+ int ret, feature_status;
+
+ ret = regmap_read(data->regmap, BMI323_FEAT_DATA_STATUS,
+ &feature_status);
+ if (ret)
+ return ret;
+
+ if (!FIELD_GET(BMI323_FEAT_DATA_TX_RDY_MSK, feature_status))
+ return -EBUSY;
+
+ ret = regmap_write(data->regmap, BMI323_FEAT_DATA_ADDR, ext_addr);
+ if (ret)
+ return ret;
+
+ return regmap_read(data->regmap, BMI323_FEAT_DATA_TX, ext_data);
+}
+
+static int bmi323_update_ext_reg(struct bmi323_data *data,
+ unsigned int ext_addr,
+ unsigned int mask, unsigned int ext_data)
+{
+ unsigned int value;
+ int ret;
+
+ ret = bmi323_read_ext_reg(data, ext_addr, &value);
+ if (ret)
+ return ret;
+
+ set_mask_bits(&value, mask, ext_data);
+
+ return bmi323_write_ext_reg(data, ext_addr, value);
+}
+
+static int bmi323_get_error_status(struct bmi323_data *data)
+{
+ int error, ret;
+
+ guard(mutex)(&data->mutex);
+ ret = regmap_read(data->regmap, BMI323_ERR_REG, &error);
+ if (ret)
+ return ret;
+
+ if (error)
+ dev_err(data->dev, "Sensor error 0x%x\n", error);
+
+ return error;
+}
+
+static int bmi323_feature_engine_events(struct bmi323_data *data,
+ const unsigned int event_mask,
+ bool state)
+{
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(data->regmap, BMI323_FEAT_IO0_REG, &value);
+ if (ret)
+ return ret;
+
+ /* Register must be cleared before changing an active config */
+ ret = regmap_write(data->regmap, BMI323_FEAT_IO0_REG, 0);
+ if (ret)
+ return ret;
+
+ if (state)
+ value |= event_mask;
+ else
+ value &= ~event_mask;
+
+ ret = regmap_write(data->regmap, BMI323_FEAT_IO0_REG, value);
+ if (ret)
+ return ret;
+
+ return regmap_write(data->regmap, BMI323_FEAT_IO_STATUS_REG,
+ BMI323_FEAT_IO_STATUS_MSK);
+}
+
+static int bmi323_step_wtrmrk_en(struct bmi323_data *data, int state)
+{
+ enum bmi323_irq_pin step_irq;
+ int ret;
+
+ guard(mutex)(&data->mutex);
+ if (!FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK, data->feature_events))
+ return -EINVAL;
+
+ if (state)
+ step_irq = data->irq_pin;
+ else
+ step_irq = BMI323_IRQ_DISABLED;
+
+ ret = bmi323_update_ext_reg(data, BMI323_STEP_SC1_REG,
+ BMI323_STEP_SC1_WTRMRK_MSK,
+ FIELD_PREP(BMI323_STEP_SC1_WTRMRK_MSK,
+ state ? 1 : 0));
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(data->regmap, BMI323_INT_MAP1_REG,
+ BMI323_STEP_CNT_MSK,
+ FIELD_PREP(BMI323_STEP_CNT_MSK, step_irq));
+}
+
+static int bmi323_motion_config_reg(enum iio_event_direction dir)
+{
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ return BMI323_ANYMO1_REG;
+ case IIO_EV_DIR_FALLING:
+ return BMI323_NOMO1_REG;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bmi323_motion_event_en(struct bmi323_data *data,
+ enum iio_event_direction dir, int state)
+{
+ unsigned int state_value = state ? BMI323_FEAT_XYZ_MSK : 0;
+ int config, ret, msk, raw, field_value;
+ enum bmi323_irq_pin motion_irq;
+ int irq_msk, irq_field_val;
+
+ if (state)
+ motion_irq = data->irq_pin;
+ else
+ motion_irq = BMI323_IRQ_DISABLED;
+
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ msk = BMI323_FEAT_IO0_XYZ_MOTION_MSK;
+ raw = 512;
+ config = BMI323_ANYMO1_REG;
+ irq_msk = BMI323_MOTION_MSK;
+ irq_field_val = FIELD_PREP(BMI323_MOTION_MSK, motion_irq);
+ field_value = FIELD_PREP(BMI323_FEAT_IO0_XYZ_MOTION_MSK,
+ state_value);
+ break;
+ case IIO_EV_DIR_FALLING:
+ msk = BMI323_FEAT_IO0_XYZ_NOMOTION_MSK;
+ raw = 0;
+ config = BMI323_NOMO1_REG;
+ irq_msk = BMI323_NOMOTION_MSK;
+ irq_field_val = FIELD_PREP(BMI323_NOMOTION_MSK, motion_irq);
+ field_value = FIELD_PREP(BMI323_FEAT_IO0_XYZ_NOMOTION_MSK,
+ state_value);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ guard(mutex)(&data->mutex);
+ ret = bmi323_feature_engine_events(data, msk, state);
+ if (ret)
+ return ret;
+
+ ret = bmi323_update_ext_reg(data, config,
+ BMI323_MO1_REF_UP_MSK,
+ FIELD_PREP(BMI323_MO1_REF_UP_MSK, 0));
+ if (ret)
+ return ret;
+
+ /* Set initial value to avoid interrupts while enabling*/
+ ret = bmi323_update_ext_reg(data, config,
+ BMI323_MO1_SLOPE_TH_MSK,
+ FIELD_PREP(BMI323_MO1_SLOPE_TH_MSK, raw));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(data->regmap, BMI323_INT_MAP1_REG, irq_msk,
+ irq_field_val);
+ if (ret)
+ return ret;
+
+ set_mask_bits(&data->feature_events, msk, field_value);
+
+ return 0;
+}
+
+static int bmi323_tap_event_en(struct bmi323_data *data,
+ enum iio_event_direction dir, int state)
+{
+ enum bmi323_irq_pin tap_irq;
+ int ret, tap_enabled;
+
+ guard(mutex)(&data->mutex);
+
+ if (data->odrhz[BMI323_ACCEL] < 200) {
+ dev_err(data->dev, "Invalid accelrometer parameter\n");
+ return -EINVAL;
+ }
+
+ switch (dir) {
+ case IIO_EV_DIR_SINGLETAP:
+ ret = bmi323_feature_engine_events(data,
+ BMI323_FEAT_IO0_S_TAP_MSK,
+ state);
+ if (ret)
+ return ret;
+
+ set_mask_bits(&data->feature_events, BMI323_FEAT_IO0_S_TAP_MSK,
+ FIELD_PREP(BMI323_FEAT_IO0_S_TAP_MSK, state));
+ break;
+ case IIO_EV_DIR_DOUBLETAP:
+ ret = bmi323_feature_engine_events(data,
+ BMI323_FEAT_IO0_D_TAP_MSK,
+ state);
+ if (ret)
+ return ret;
+
+ set_mask_bits(&data->feature_events, BMI323_FEAT_IO0_D_TAP_MSK,
+ FIELD_PREP(BMI323_FEAT_IO0_D_TAP_MSK, state));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ tap_enabled = FIELD_GET(BMI323_FEAT_IO0_S_TAP_MSK |
+ BMI323_FEAT_IO0_D_TAP_MSK,
+ data->feature_events);
+
+ if (tap_enabled)
+ tap_irq = data->irq_pin;
+ else
+ tap_irq = BMI323_IRQ_DISABLED;
+
+ ret = regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG,
+ BMI323_TAP_MSK,
+ FIELD_PREP(BMI323_TAP_MSK, tap_irq));
+ if (ret)
+ return ret;
+
+ if (!state)
+ return 0;
+
+ ret = bmi323_update_ext_reg(data, BMI323_TAP1_REG,
+ BMI323_TAP1_MAX_PEAKS_MSK,
+ FIELD_PREP(BMI323_TAP1_MAX_PEAKS_MSK,
+ 0x04));
+ if (ret)
+ return ret;
+
+ ret = bmi323_update_ext_reg(data, BMI323_TAP1_REG,
+ BMI323_TAP1_AXIS_SEL_MSK,
+ FIELD_PREP(BMI323_TAP1_AXIS_SEL_MSK,
+ BMI323_AXIS_XYZ_MSK));
+ if (ret)
+ return ret;
+
+ return bmi323_update_ext_reg(data, BMI323_TAP1_REG,
+ BMI323_TAP1_TIMOUT_MSK,
+ FIELD_PREP(BMI323_TAP1_TIMOUT_MSK,
+ 0));
+}
+
+static ssize_t in_accel_gesture_tap_wait_dur_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bmi323_data *data = iio_priv(indio_dev);
+ unsigned int reg_value, raw;
+ int ret, val[2];
+
+ scoped_guard(mutex, &data->mutex) {
+ ret = bmi323_read_ext_reg(data, BMI323_TAP2_REG, ®_value);
+ if (ret)
+ return ret;
+ }
+
+ raw = FIELD_GET(BMI323_TAP2_MAX_DUR_MSK, reg_value);
+ val[0] = raw / BMI323_MAX_GES_DUR_SCALE;
+ val[1] = BMI323_RAW_TO_MICRO(raw, BMI323_MAX_GES_DUR_SCALE);
+
+ return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, ARRAY_SIZE(val),
+ val);
+}
+
+static ssize_t in_accel_gesture_tap_wait_dur_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bmi323_data *data = iio_priv(indio_dev);
+ int ret, val_int, val_fract, raw;
+
+ ret = iio_str_to_fixpoint(buf, 100000, &val_int, &val_fract);
+ if (ret)
+ return ret;
+
+ raw = BMI323_INT_MICRO_TO_RAW(val_int, val_fract,
+ BMI323_MAX_GES_DUR_SCALE);
+ if (!in_range(raw, 0, 64))
+ return -EINVAL;
+
+ guard(mutex)(&data->mutex);
+ ret = bmi323_update_ext_reg(data, BMI323_TAP2_REG,
+ BMI323_TAP2_MAX_DUR_MSK,
+ FIELD_PREP(BMI323_TAP2_MAX_DUR_MSK, raw));
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+/*
+ * Maximum duration from first tap within the second tap is expected to happen.
+ * This timeout is applicable only if gesture_tap_wait_timeout is enabled.
+ */
+static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_wait_dur, 0);
+
+static ssize_t in_accel_gesture_tap_wait_timeout_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bmi323_data *data = iio_priv(indio_dev);
+ unsigned int reg_value, raw;
+ int ret;
+
+ scoped_guard(mutex, &data->mutex) {
+ ret = bmi323_read_ext_reg(data, BMI323_TAP1_REG, ®_value);
+ if (ret)
+ return ret;
+ }
+
+ raw = FIELD_GET(BMI323_TAP1_TIMOUT_MSK, reg_value);
+
+ return iio_format_value(buf, IIO_VAL_INT, 1, &raw);
+}
+
+static ssize_t in_accel_gesture_tap_wait_timeout_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bmi323_data *data = iio_priv(indio_dev);
+ bool val;
+ int ret;
+
+ ret = kstrtobool(buf, &val);
+ if (ret)
+ return ret;
+
+ guard(mutex)(&data->mutex);
+ ret = bmi323_update_ext_reg(data, BMI323_TAP1_REG,
+ BMI323_TAP1_TIMOUT_MSK,
+ FIELD_PREP(BMI323_TAP1_TIMOUT_MSK, val));
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+/* Enable/disable gesture confirmation with wait time */
+static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_wait_timeout, 0);
+
+static IIO_CONST_ATTR(in_accel_gesture_tap_wait_dur_available,
+ "[0.0 0.04 2.52]");
+
+static IIO_CONST_ATTR(in_accel_gesture_doubletap_tap2_min_delay_available,
+ "[0.005 0.005 0.075]");
+
+static IIO_CONST_ATTR(in_accel_gesture_tap_reset_timeout_available,
+ "[0.04 0.04 0.6]");
+
+static IIO_CONST_ATTR(in_accel_gesture_tap_value_available, "[0.0 0.002 1.99]");
+
+static IIO_CONST_ATTR(in_accel_mag_value_available, "[0.0 0.002 7.99]");
+
+static IIO_CONST_ATTR(in_accel_mag_period_available, "[0.0 0.02 162.0]");
+
+static IIO_CONST_ATTR(in_accel_mag_hysteresis_available, "[0.0 0.002 1.99]");
+
+static struct attribute *bmi323_event_attributes[] = {
+ &iio_const_attr_in_accel_gesture_tap_value_available.dev_attr.attr,
+ &iio_const_attr_in_accel_gesture_tap_reset_timeout_available.dev_attr.attr,
+ &iio_const_attr_in_accel_gesture_doubletap_tap2_min_delay_available.dev_attr.attr,
+ &iio_const_attr_in_accel_gesture_tap_wait_dur_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_gesture_tap_wait_timeout.dev_attr.attr,
+ &iio_dev_attr_in_accel_gesture_tap_wait_dur.dev_attr.attr,
+ &iio_const_attr_in_accel_mag_value_available.dev_attr.attr,
+ &iio_const_attr_in_accel_mag_period_available.dev_attr.attr,
+ &iio_const_attr_in_accel_mag_hysteresis_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group bmi323_event_attribute_group = {
+ .attrs = bmi323_event_attributes,
+};
+
+static int bmi323_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir, int state)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+
+ switch (type) {
+ case IIO_EV_TYPE_MAG:
+ return bmi323_motion_event_en(data, dir, state);
+ case IIO_EV_TYPE_GESTURE:
+ return bmi323_tap_event_en(data, dir, state);
+ case IIO_EV_TYPE_CHANGE:
+ return bmi323_step_wtrmrk_en(data, state);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bmi323_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+ int ret, value, reg_val;
+
+ guard(mutex)(&data->mutex);
+
+ switch (chan->type) {
+ case IIO_ACCEL:
+ switch (dir) {
+ case IIO_EV_DIR_SINGLETAP:
+ ret = FIELD_GET(BMI323_FEAT_IO0_S_TAP_MSK,
+ data->feature_events);
+ break;
+ case IIO_EV_DIR_DOUBLETAP:
+ ret = FIELD_GET(BMI323_FEAT_IO0_D_TAP_MSK,
+ data->feature_events);
+ break;
+ case IIO_EV_DIR_RISING:
+ value = FIELD_GET(BMI323_FEAT_IO0_XYZ_MOTION_MSK,
+ data->feature_events);
+ ret = value ? 1 : 0;
+ break;
+ case IIO_EV_DIR_FALLING:
+ value = FIELD_GET(BMI323_FEAT_IO0_XYZ_NOMOTION_MSK,
+ data->feature_events);
+ ret = value ? 1 : 0;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+ case IIO_STEPS:
+ ret = regmap_read(data->regmap, BMI323_INT_MAP1_REG, ®_val);
+ if (ret)
+ return ret;
+
+ return FIELD_GET(BMI323_STEP_CNT_MSK, reg_val) ? 1 : 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bmi323_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+ unsigned int raw;
+ int reg;
+
+ guard(mutex)(&data->mutex);
+
+ switch (type) {
+ case IIO_EV_TYPE_GESTURE:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ if (!in_range(val, 0, 2))
+ return -EINVAL;
+
+ raw = BMI323_INT_MICRO_TO_RAW(val, val2,
+ BMI323_TAP_THRES_SCALE);
+
+ return bmi323_update_ext_reg(data, BMI323_TAP2_REG,
+ BMI323_TAP2_THRES_MSK,
+ FIELD_PREP(BMI323_TAP2_THRES_MSK,
+ raw));
+ case IIO_EV_INFO_RESET_TIMEOUT:
+ if (val || !in_range(val2, 40000, 560001))
+ return -EINVAL;
+
+ raw = BMI323_INT_MICRO_TO_RAW(val, val2,
+ BMI323_QUITE_TIM_GES_SCALE);
+
+ return bmi323_update_ext_reg(data, BMI323_TAP3_REG,
+ BMI323_TAP3_QT_AFT_GES_MSK,
+ FIELD_PREP(BMI323_TAP3_QT_AFT_GES_MSK,
+ raw));
+ case IIO_EV_INFO_TAP2_MIN_DELAY:
+ if (val || !in_range(val2, 5000, 70001))
+ return -EINVAL;
+
+ raw = BMI323_INT_MICRO_TO_RAW(val, val2,
+ BMI323_DUR_BW_TAP_SCALE);
+
+ return bmi323_update_ext_reg(data, BMI323_TAP3_REG,
+ BMI323_TAP3_QT_BW_TAP_MSK,
+ FIELD_PREP(BMI323_TAP3_QT_BW_TAP_MSK,
+ raw));
+ default:
+ return -EINVAL;
+ }
+ case IIO_EV_TYPE_MAG:
+ reg = bmi323_motion_config_reg(dir);
+ if (reg < 0)
+ return -EINVAL;
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ if (!in_range(val, 0, 8))
+ return -EINVAL;
+
+ raw = BMI323_INT_MICRO_TO_RAW(val, val2,
+ BMI323_MOTION_THRES_SCALE);
+
+ return bmi323_update_ext_reg(data, reg,
+ BMI323_MO1_SLOPE_TH_MSK,
+ FIELD_PREP(BMI323_MO1_SLOPE_TH_MSK,
+ raw));
+ case IIO_EV_INFO_PERIOD:
+ if (!in_range(val, 0, 163))
+ return -EINVAL;
+
+ raw = BMI323_INT_MICRO_TO_RAW(val, val2,
+ BMI323_MOTION_DURAT_SCALE);
+
+ return bmi323_update_ext_reg(data,
+ reg + BMI323_MO3_OFFSET,
+ BMI323_MO3_DURA_MSK,
+ FIELD_PREP(BMI323_MO3_DURA_MSK,
+ raw));
+ case IIO_EV_INFO_HYSTERESIS:
+ if (!in_range(val, 0, 2))
+ return -EINVAL;
+
+ raw = BMI323_INT_MICRO_TO_RAW(val, val2,
+ BMI323_MOTION_HYSTR_SCALE);
+
+ return bmi323_update_ext_reg(data,
+ reg + BMI323_MO2_OFFSET,
+ BMI323_MO2_HYSTR_MSK,
+ FIELD_PREP(BMI323_MO2_HYSTR_MSK,
+ raw));
+ default:
+ return -EINVAL;
+ }
+ case IIO_EV_TYPE_CHANGE:
+ if (!in_range(val, 0, 20461))
+ return -EINVAL;
+
+ raw = val / 20;
+ return bmi323_update_ext_reg(data, BMI323_STEP_SC1_REG,
+ BMI323_STEP_SC1_WTRMRK_MSK,
+ FIELD_PREP(BMI323_STEP_SC1_WTRMRK_MSK,
+ raw));
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bmi323_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+ unsigned int raw, reg_value;
+ int ret, reg;
+
+ guard(mutex)(&data->mutex);
+
+ switch (type) {
+ case IIO_EV_TYPE_GESTURE:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ ret = bmi323_read_ext_reg(data, BMI323_TAP2_REG,
+ ®_value);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMI323_TAP2_THRES_MSK, reg_value);
+ *val = raw / BMI323_TAP_THRES_SCALE;
+ *val2 = BMI323_RAW_TO_MICRO(raw, BMI323_TAP_THRES_SCALE);
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_EV_INFO_RESET_TIMEOUT:
+ ret = bmi323_read_ext_reg(data, BMI323_TAP3_REG,
+ ®_value);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMI323_TAP3_QT_AFT_GES_MSK, reg_value);
+ *val = 0;
+ *val2 = BMI323_RAW_TO_MICRO(raw,
+ BMI323_QUITE_TIM_GES_SCALE);
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_EV_INFO_TAP2_MIN_DELAY:
+ ret = bmi323_read_ext_reg(data, BMI323_TAP3_REG,
+ ®_value);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMI323_TAP3_QT_BW_TAP_MSK, reg_value);
+ *val = 0;
+ *val2 = BMI323_RAW_TO_MICRO(raw,
+ BMI323_DUR_BW_TAP_SCALE);
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_EV_TYPE_MAG:
+ reg = bmi323_motion_config_reg(dir);
+ if (reg < 0)
+ return -EINVAL;
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ ret = bmi323_read_ext_reg(data, reg, ®_value);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMI323_MO1_SLOPE_TH_MSK, reg_value);
+ *val = raw / BMI323_MOTION_THRES_SCALE;
+ *val2 = BMI323_RAW_TO_MICRO(raw,
+ BMI323_MOTION_THRES_SCALE);
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_EV_INFO_PERIOD:
+ ret = bmi323_read_ext_reg(data,
+ reg + BMI323_MO3_OFFSET,
+ ®_value);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMI323_MO3_DURA_MSK, reg_value);
+ *val = raw / BMI323_MOTION_DURAT_SCALE;
+ *val2 = BMI323_RAW_TO_MICRO(raw,
+ BMI323_MOTION_DURAT_SCALE);
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_EV_INFO_HYSTERESIS:
+ ret = bmi323_read_ext_reg(data,
+ reg + BMI323_MO2_OFFSET,
+ ®_value);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMI323_MO2_HYSTR_MSK, reg_value);
+ *val = raw / BMI323_MOTION_HYSTR_SCALE;
+ *val2 = BMI323_RAW_TO_MICRO(raw,
+ BMI323_MOTION_HYSTR_SCALE);
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_EV_TYPE_CHANGE:
+ ret = bmi323_read_ext_reg(data, BMI323_STEP_SC1_REG,
+ ®_value);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMI323_STEP_SC1_WTRMRK_MSK, reg_value);
+ *val = raw * 20;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int __bmi323_fifo_flush(struct iio_dev *indio_dev)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+ int i, ret, fifo_lvl, frame_count, bit, index;
+ __le16 *frame, *pchannels;
+ u64 sample_period;
+ s64 tstamp;
+
+ guard(mutex)(&data->mutex);
+ ret = regmap_read(data->regmap, BMI323_FIFO_FILL_LEVEL_REG, &fifo_lvl);
+ if (ret)
+ return ret;
+
+ fifo_lvl = min(fifo_lvl, BMI323_FIFO_FULL_IN_WORDS);
+
+ frame_count = fifo_lvl / BMI323_FIFO_FRAME_LENGTH;
+ if (!frame_count)
+ return -EINVAL;
+
+ if (fifo_lvl % BMI323_FIFO_FRAME_LENGTH)
+ dev_warn(data->dev, "Bad FIFO alignment\n");
+
+ /*
+ * Approximate timestamps for each of the sample based on the sampling
+ * frequency, timestamp for last sample and number of samples.
+ */
+ if (data->old_fifo_tstamp) {
+ sample_period = data->fifo_tstamp - data->old_fifo_tstamp;
+ do_div(sample_period, frame_count);
+ } else {
+ sample_period = data->odrns[BMI323_ACCEL];
+ }
+
+ tstamp = data->fifo_tstamp - (frame_count - 1) * sample_period;
+
+ ret = regmap_noinc_read(data->regmap, BMI323_FIFO_DATA_REG,
+ &data->fifo_buff[0],
+ fifo_lvl * BMI323_BYTES_PER_SAMPLE);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < frame_count; i++) {
+ frame = &data->fifo_buff[i * BMI323_FIFO_FRAME_LENGTH];
+ pchannels = &data->buffer.channels[0];
+
+ index = 0;
+ for_each_set_bit(bit, indio_dev->active_scan_mask,
+ BMI323_CHAN_MAX)
+ pchannels[index++] = frame[bit];
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
+ tstamp);
+
+ tstamp += sample_period;
+ }
+
+ return frame_count;
+}
+
+static int bmi323_set_watermark(struct iio_dev *indio_dev, unsigned int val)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+
+ val = min(val, (u32)BMI323_FIFO_FULL_IN_FRAMES);
+
+ guard(mutex)(&data->mutex);
+ data->watermark = val;
+
+ return 0;
+}
+
+static int bmi323_fifo_disable(struct bmi323_data *data)
+{
+ int ret;
+
+ guard(mutex)(&data->mutex);
+ ret = regmap_write(data->regmap, BMI323_FIFO_CONF_REG, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG,
+ BMI323_FIFO_WTRMRK_MSK,
+ FIELD_PREP(BMI323_FIFO_WTRMRK_MSK, 0));
+ if (ret)
+ return ret;
+
+ data->fifo_tstamp = 0;
+ data->state = BMI323_IDLE;
+
+ return 0;
+}
+
+static int bmi323_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+
+ if (iio_device_get_current_mode(indio_dev) == INDIO_BUFFER_TRIGGERED)
+ return 0;
+
+ return bmi323_fifo_disable(data);
+}
+
+static int bmi323_update_watermark(struct bmi323_data *data)
+{
+ int wtrmrk;
+
+ wtrmrk = data->watermark * BMI323_FIFO_FRAME_LENGTH;
+
+ return regmap_write(data->regmap, BMI323_FIFO_WTRMRK_REG, wtrmrk);
+}
+
+static int bmi323_fifo_enable(struct bmi323_data *data)
+{
+ int ret;
+
+ guard(mutex)(&data->mutex);
+ ret = regmap_update_bits(data->regmap, BMI323_FIFO_CONF_REG,
+ BMI323_FIFO_CONF_ACC_GYR_EN_MSK,
+ FIELD_PREP(BMI323_FIFO_CONF_ACC_GYR_EN_MSK,
+ BMI323_FIFO_ACC_GYR_MSK));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG,
+ BMI323_FIFO_WTRMRK_MSK,
+ FIELD_PREP(BMI323_FIFO_WTRMRK_MSK,
+ data->irq_pin));
+ if (ret)
+ return ret;
+
+ ret = bmi323_update_watermark(data);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(data->regmap, BMI323_FIFO_CTRL_REG,
+ BMI323_FIFO_FLUSH_MSK);
+ if (ret)
+ return ret;
+
+ data->state = BMI323_BUFFER_FIFO;
+
+ return 0;
+}
+
+static int bmi323_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+
+ guard(mutex)(&data->mutex);
+ /*
+ * When the ODR of the accelerometer and gyroscope do not match, the
+ * maximum ODR value between the accelerometer and gyroscope is used
+ * for FIFO and the signal with lower ODR will insert dummy frame.
+ * So allow buffer read only when ODR's of accelero and gyro are equal.
+ * See datasheet section 5.7 "FIFO Data Buffering".
+ */
+ if (data->odrns[BMI323_ACCEL] != data->odrns[BMI323_GYRO]) {
+ dev_err(data->dev, "Accelero and Gyro ODR doesn't match\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int bmi323_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+
+ if (iio_device_get_current_mode(indio_dev) == INDIO_BUFFER_TRIGGERED)
+ return 0;
+
+ return bmi323_fifo_enable(data);
+}
+
+static ssize_t hwfifo_watermark_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bmi323_data *data = iio_priv(indio_dev);
+ int wm;
+
+ scoped_guard(mutex, &data->mutex)
+ wm = data->watermark;
+
+ return sysfs_emit(buf, "%d\n", wm);
+}
+static IIO_DEVICE_ATTR_RO(hwfifo_watermark, 0);
+
+static ssize_t hwfifo_enabled_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bmi323_data *data = iio_priv(indio_dev);
+ bool state;
+
+ scoped_guard(mutex, &data->mutex)
+ state = data->state == BMI323_BUFFER_FIFO;
+
+ return sysfs_emit(buf, "%d\n", state);
+}
+static IIO_DEVICE_ATTR_RO(hwfifo_enabled, 0);
+
+static const struct iio_dev_attr *bmi323_fifo_attributes[] = {
+ &iio_dev_attr_hwfifo_watermark,
+ &iio_dev_attr_hwfifo_enabled,
+ NULL
+};
+
+static const struct iio_buffer_setup_ops bmi323_buffer_ops = {
+ .preenable = bmi323_buffer_preenable,
+ .postenable = bmi323_buffer_postenable,
+ .predisable = bmi323_buffer_predisable,
+};
+
+static irqreturn_t bmi323_irq_thread_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct bmi323_data *data = iio_priv(indio_dev);
+ unsigned int status_addr, status, feature_event;
+ s64 timestamp = iio_get_time_ns(indio_dev);
+ int ret;
+
+ if (data->irq_pin == BMI323_IRQ_INT1)
+ status_addr = BMI323_STATUS_INT1_REG;
+ else
+ status_addr = BMI323_STATUS_INT2_REG;
+
+ scoped_guard(mutex, &data->mutex) {
+ ret = regmap_read(data->regmap, status_addr, &status);
+ if (ret)
+ return IRQ_NONE;
+ }
+
+ if (!status || FIELD_GET(BMI323_STATUS_ERROR_MSK, status))
+ return IRQ_NONE;
+
+ if (FIELD_GET(BMI323_STATUS_FIFO_WTRMRK_MSK, status)) {
+ data->old_fifo_tstamp = data->fifo_tstamp;
+ data->fifo_tstamp = iio_get_time_ns(indio_dev);
+ ret = __bmi323_fifo_flush(indio_dev);
+ if (ret < 0)
+ return IRQ_NONE;
+ }
+
+ if (FIELD_GET(BMI323_STATUS_ACC_GYR_DRDY_MSK, status))
+ iio_trigger_poll_nested(data->trig);
+
+ if (FIELD_GET(BMI323_STATUS_MOTION_MSK, status))
+ iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_OR_Y_OR_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ timestamp);
+
+ if (FIELD_GET(BMI323_STATUS_NOMOTION_MSK, status))
+ iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_OR_Y_OR_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_FALLING),
+ timestamp);
+
+ if (FIELD_GET(BMI323_STATUS_STP_WTR_MSK, status))
+ iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_STEPS, 0,
+ IIO_NO_MOD,
+ IIO_EV_TYPE_CHANGE,
+ IIO_EV_DIR_NONE),
+ timestamp);
+
+ if (FIELD_GET(BMI323_STATUS_TAP_MSK, status)) {
+ scoped_guard(mutex, &data->mutex) {
+ ret = regmap_read(data->regmap,
+ BMI323_FEAT_EVNT_EXT_REG,
+ &feature_event);
+ if (ret)
+ return IRQ_NONE;
+ }
+
+ if (FIELD_GET(BMI323_FEAT_EVNT_EXT_S_MSK, feature_event)) {
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_OR_Y_OR_Z,
+ IIO_EV_TYPE_GESTURE,
+ IIO_EV_DIR_SINGLETAP),
+ timestamp);
+ }
+
+ if (FIELD_GET(BMI323_FEAT_EVNT_EXT_D_MSK, feature_event))
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_OR_Y_OR_Z,
+ IIO_EV_TYPE_GESTURE,
+ IIO_EV_DIR_DOUBLETAP),
+ timestamp);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int bmi323_set_drdy_irq(struct bmi323_data *data,
+ enum bmi323_irq_pin irq_pin)
+{
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG,
+ BMI323_GYR_DRDY_MSK,
+ FIELD_PREP(BMI323_GYR_DRDY_MSK, irq_pin));
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG,
+ BMI323_ACC_DRDY_MSK,
+ FIELD_PREP(BMI323_ACC_DRDY_MSK, irq_pin));
+}
+
+static int bmi323_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ struct bmi323_data *data = iio_trigger_get_drvdata(trig);
+ enum bmi323_irq_pin irq_pin;
+
+ guard(mutex)(&data->mutex);
+
+ if (data->state == BMI323_BUFFER_FIFO) {
+ dev_warn(data->dev, "Can't set trigger when FIFO enabled\n");
+ return -EBUSY;
+ }
+
+ if (state) {
+ data->state = BMI323_BUFFER_DRDY_TRIGGERED;
+ irq_pin = data->irq_pin;
+ } else {
+ data->state = BMI323_IDLE;
+ irq_pin = BMI323_IRQ_DISABLED;
+ }
+
+ return bmi323_set_drdy_irq(data, irq_pin);
+}
+
+static const struct iio_trigger_ops bmi323_trigger_ops = {
+ .set_trigger_state = &bmi323_data_rdy_trigger_set_state,
+};
+
+static irqreturn_t bmi323_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct bmi323_data *data = iio_priv(indio_dev);
+ int ret, bit, index = 0;
+
+ /* Lock to protect the data->buffer */
+ guard(mutex)(&data->mutex);
+
+ if (*indio_dev->active_scan_mask == BMI323_ALL_CHAN_MSK) {
+ ret = regmap_bulk_read(data->regmap, BMI323_ACCEL_X_REG,
+ &data->buffer.channels,
+ ARRAY_SIZE(data->buffer.channels));
+ if (ret)
+ return IRQ_NONE;
+ } else {
+ for_each_set_bit(bit, indio_dev->active_scan_mask,
+ BMI323_CHAN_MAX) {
+ ret = regmap_raw_read(data->regmap,
+ BMI323_ACCEL_X_REG + bit,
+ &data->buffer.channels[index++],
+ BMI323_BYTES_PER_SAMPLE);
+ if (ret)
+ return IRQ_NONE;
+ }
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
+ iio_get_time_ns(indio_dev));
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int bmi323_set_average(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor, int avg)
+{
+ int raw = ARRAY_SIZE(bmi323_accel_gyro_avrg);
+
+ while (raw--)
+ if (avg == bmi323_accel_gyro_avrg[raw])
+ break;
+ if (raw < 0)
+ return -EINVAL;
+
+ guard(mutex)(&data->mutex);
+ return regmap_update_bits(data->regmap, bmi323_hw[sensor].config,
+ BMI323_ACC_GYRO_CONF_AVG_MSK,
+ FIELD_PREP(BMI323_ACC_GYRO_CONF_AVG_MSK,
+ raw));
+}
+
+static int bmi323_get_average(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor, int *avg)
+{
+ int ret, value, raw;
+
+ scoped_guard(mutex, &data->mutex) {
+ ret = regmap_read(data->regmap, bmi323_hw[sensor].config, &value);
+ if (ret)
+ return ret;
+ }
+
+ raw = FIELD_GET(BMI323_ACC_GYRO_CONF_AVG_MSK, value);
+ *avg = bmi323_accel_gyro_avrg[raw];
+
+ return IIO_VAL_INT;
+}
+
+static int bmi323_enable_steps(struct bmi323_data *data, int val)
+{
+ int ret;
+
+ guard(mutex)(&data->mutex);
+ if (data->odrhz[BMI323_ACCEL] < 200) {
+ dev_err(data->dev, "Invalid accelrometer parameter\n");
+ return -EINVAL;
+ }
+
+ ret = bmi323_feature_engine_events(data, BMI323_FEAT_IO0_STP_CNT_MSK,
+ val ? 1 : 0);
+ if (ret)
+ return ret;
+
+ set_mask_bits(&data->feature_events, BMI323_FEAT_IO0_STP_CNT_MSK,
+ FIELD_PREP(BMI323_FEAT_IO0_STP_CNT_MSK, val ? 1 : 0));
+
+ return 0;
+}
+
+static int bmi323_read_steps(struct bmi323_data *data, int *val)
+{
+ int ret;
+
+ guard(mutex)(&data->mutex);
+ if (!FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK, data->feature_events))
+ return -EINVAL;
+
+ ret = regmap_bulk_read(data->regmap, BMI323_FEAT_IO2_REG,
+ data->steps_count,
+ ARRAY_SIZE(data->steps_count));
+ if (ret)
+ return ret;
+
+ *val = get_unaligned_le32(data->steps_count);
+
+ return IIO_VAL_INT;
+}
+
+static int bmi323_read_axis(struct bmi323_data *data,
+ struct iio_chan_spec const *chan, int *val)
+{
+ enum bmi323_sensor_type sensor;
+ unsigned int value;
+ u8 addr;
+ int ret;
+
+ ret = bmi323_get_error_status(data);
+ if (ret)
+ return -EINVAL;
+
+ sensor = bmi323_iio_to_sensor(chan->type);
+ addr = bmi323_hw[sensor].data + (chan->channel2 - IIO_MOD_X);
+
+ scoped_guard(mutex, &data->mutex) {
+ ret = regmap_read(data->regmap, addr, &value);
+ if (ret)
+ return ret;
+ }
+
+ *val = sign_extend32(value, chan->scan_type.realbits - 1);
+
+ return IIO_VAL_INT;
+}
+
+static int bmi323_get_temp_data(struct bmi323_data *data, int *val)
+{
+ unsigned int value;
+ int ret;
+
+ ret = bmi323_get_error_status(data);
+ if (ret)
+ return -EINVAL;
+
+ scoped_guard(mutex, &data->mutex) {
+ ret = regmap_read(data->regmap, BMI323_TEMP_REG, &value);
+ if (ret)
+ return ret;
+ }
+
+ *val = sign_extend32(value, 15);
+
+ return IIO_VAL_INT;
+}
+
+static int bmi323_get_odr(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor, int *odr, int *uodr)
+{
+ int ret, value, odr_raw;
+
+ scoped_guard(mutex, &data->mutex) {
+ ret = regmap_read(data->regmap, bmi323_hw[sensor].config, &value);
+ if (ret)
+ return ret;
+ }
+
+ odr_raw = FIELD_GET(BMI323_ACC_GYRO_CONF_ODR_MSK, value);
+ *odr = bmi323_acc_gyro_odr[odr_raw - 1][0];
+ *uodr = bmi323_acc_gyro_odr[odr_raw - 1][1];
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int bmi323_configure_power_mode(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor,
+ int odr_index)
+{
+ enum bmi323_opr_mode mode;
+
+ if (bmi323_acc_gyro_odr[odr_index][0] > 25)
+ mode = ACC_GYRO_MODE_CONTINOUS;
+ else
+ mode = ACC_GYRO_MODE_DUTYCYCLE;
+
+ return bmi323_set_mode(data, sensor, mode);
+}
+
+static int bmi323_set_odr(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor, int odr, int uodr)
+{
+ int odr_raw, ret;
+
+ odr_raw = ARRAY_SIZE(bmi323_acc_gyro_odr);
+
+ while (odr_raw--)
+ if (odr == bmi323_acc_gyro_odr[odr_raw][0] &&
+ uodr == bmi323_acc_gyro_odr[odr_raw][1])
+ break;
+ if (odr_raw < 0)
+ return -EINVAL;
+
+ ret = bmi323_configure_power_mode(data, sensor, odr_raw);
+ if (ret)
+ return -EINVAL;
+
+ guard(mutex)(&data->mutex);
+ data->odrhz[sensor] = bmi323_acc_gyro_odr[odr_raw][0];
+ data->odrns[sensor] = bmi323_acc_gyro_odrns[odr_raw];
+
+ odr_raw++;
+
+ return regmap_update_bits(data->regmap, bmi323_hw[sensor].config,
+ BMI323_ACC_GYRO_CONF_ODR_MSK,
+ FIELD_PREP(BMI323_ACC_GYRO_CONF_ODR_MSK,
+ odr_raw));
+}
+
+static int bmi323_get_scale(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor, int *val2)
+{
+ int ret, value, scale_raw;
+
+ scoped_guard(mutex, &data->mutex) {
+ ret = regmap_read(data->regmap, bmi323_hw[sensor].config,
+ &value);
+ if (ret)
+ return ret;
+ }
+
+ scale_raw = FIELD_GET(BMI323_ACC_GYRO_CONF_SCL_MSK, value);
+ *val2 = bmi323_hw[sensor].scale_table[scale_raw][1];
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int bmi323_set_scale(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor, int val, int val2)
+{
+ int scale_raw;
+
+ scale_raw = bmi323_hw[sensor].scale_table_len;
+
+ while (scale_raw--)
+ if (val == bmi323_hw[sensor].scale_table[scale_raw][0] &&
+ val2 == bmi323_hw[sensor].scale_table[scale_raw][1])
+ break;
+ if (scale_raw < 0)
+ return -EINVAL;
+
+ guard(mutex)(&data->mutex);
+ return regmap_update_bits(data->regmap, bmi323_hw[sensor].config,
+ BMI323_ACC_GYRO_CONF_SCL_MSK,
+ FIELD_PREP(BMI323_ACC_GYRO_CONF_SCL_MSK,
+ scale_raw));
+}
+
+static int bmi323_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ enum bmi323_sensor_type sensor;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ *vals = (const int *)bmi323_acc_gyro_odr;
+ *length = ARRAY_SIZE(bmi323_acc_gyro_odr) * 2;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_SCALE:
+ sensor = bmi323_iio_to_sensor(chan->type);
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ *vals = (const int *)bmi323_hw[sensor].scale_table;
+ *length = bmi323_hw[sensor].scale_table_len * 2;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *type = IIO_VAL_INT;
+ *vals = (const int *)bmi323_accel_gyro_avrg;
+ *length = ARRAY_SIZE(bmi323_accel_gyro_avrg);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bmi323_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = bmi323_set_odr(data, bmi323_iio_to_sensor(chan->type),
+ val, val2);
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ case IIO_CHAN_INFO_SCALE:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = bmi323_set_scale(data, bmi323_iio_to_sensor(chan->type),
+ val, val2);
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = bmi323_set_average(data, bmi323_iio_to_sensor(chan->type),
+ val);
+
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ case IIO_CHAN_INFO_ENABLE:
+ return bmi323_enable_steps(data, val);
+ case IIO_CHAN_INFO_PROCESSED:
+ scoped_guard(mutex, &data->mutex) {
+ if (val || !FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK,
+ data->feature_events))
+ return -EINVAL;
+
+ /* Clear step counter value */
+ ret = bmi323_update_ext_reg(data, BMI323_STEP_SC1_REG,
+ BMI323_STEP_SC1_RST_CNT_MSK,
+ FIELD_PREP(BMI323_STEP_SC1_RST_CNT_MSK,
+ 1));
+ }
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bmi323_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct bmi323_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ return bmi323_read_steps(data, val);
+ case IIO_CHAN_INFO_RAW:
+ switch (chan->type) {
+ case IIO_ACCEL:
+ case IIO_ANGL_VEL:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = bmi323_read_axis(data, chan, val);
+
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ case IIO_TEMP:
+ return bmi323_get_temp_data(data, val);
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return bmi323_get_odr(data, bmi323_iio_to_sensor(chan->type),
+ val, val2);
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ACCEL:
+ case IIO_ANGL_VEL:
+ *val = 0;
+ return bmi323_get_scale(data,
+ bmi323_iio_to_sensor(chan->type),
+ val2);
+ case IIO_TEMP:
+ *val = BMI323_TEMP_SCALE / MEGA;
+ *val2 = BMI323_TEMP_SCALE % MEGA;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ return bmi323_get_average(data,
+ bmi323_iio_to_sensor(chan->type),
+ val);
+ case IIO_CHAN_INFO_OFFSET:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = BMI323_TEMP_OFFSET;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_ENABLE:
+ scoped_guard(mutex, &data->mutex)
+ *val = FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK,
+ data->feature_events);
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info bmi323_info = {
+ .read_raw = bmi323_read_raw,
+ .write_raw = bmi323_write_raw,
+ .read_avail = bmi323_read_avail,
+ .hwfifo_set_watermark = bmi323_set_watermark,
+ .write_event_config = bmi323_write_event_config,
+ .read_event_config = bmi323_read_event_config,
+ .write_event_value = bmi323_write_event_value,
+ .read_event_value = bmi323_read_event_value,
+ .event_attrs = &bmi323_event_attribute_group,
+};
+
+#define BMI323_SCAN_MASK_ACCEL_3AXIS \
+ (BIT(BMI323_ACCEL_X) | BIT(BMI323_ACCEL_Y) | BIT(BMI323_ACCEL_Z))
+
+#define BMI323_SCAN_MASK_GYRO_3AXIS \
+ (BIT(BMI323_GYRO_X) | BIT(BMI323_GYRO_Y) | BIT(BMI323_GYRO_Z))
+
+static const unsigned long bmi323_avail_scan_masks[] = {
+ /* 3-axis accel */
+ BMI323_SCAN_MASK_ACCEL_3AXIS,
+ /* 3-axis gyro */
+ BMI323_SCAN_MASK_GYRO_3AXIS,
+ /* 3-axis accel + 3-axis gyro */
+ BMI323_SCAN_MASK_ACCEL_3AXIS | BMI323_SCAN_MASK_GYRO_3AXIS,
+ 0
+};
+
+static int bmi323_int_pin_config(struct bmi323_data *data,
+ enum bmi323_irq_pin irq_pin,
+ bool active_high, bool open_drain, bool latch)
+{
+ unsigned int mask, field_value;
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, BMI323_IO_INT_CONF_REG,
+ BMI323_IO_INT_LTCH_MSK,
+ FIELD_PREP(BMI323_IO_INT_LTCH_MSK, latch));
+ if (ret)
+ return ret;
+
+ ret = bmi323_update_ext_reg(data, BMI323_GEN_SET1_REG,
+ BMI323_GEN_HOLD_DUR_MSK,
+ FIELD_PREP(BMI323_GEN_HOLD_DUR_MSK, 0));
+ if (ret)
+ return ret;
+
+ switch (irq_pin) {
+ case BMI323_IRQ_INT1:
+ mask = BMI323_IO_INT1_LVL_OD_OP_MSK;
+
+ field_value = FIELD_PREP(BMI323_IO_INT1_LVL_MSK, active_high) |
+ FIELD_PREP(BMI323_IO_INT1_OD_MSK, open_drain) |
+ FIELD_PREP(BMI323_IO_INT1_OP_EN_MSK, 1);
+ break;
+ case BMI323_IRQ_INT2:
+ mask = BMI323_IO_INT2_LVL_OD_OP_MSK;
+
+ field_value = FIELD_PREP(BMI323_IO_INT2_LVL_MSK, active_high) |
+ FIELD_PREP(BMI323_IO_INT2_OD_MSK, open_drain) |
+ FIELD_PREP(BMI323_IO_INT2_OP_EN_MSK, 1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(data->regmap, BMI323_IO_INT_CTR_REG, mask,
+ field_value);
+}
+
+static int bmi323_trigger_probe(struct bmi323_data *data,
+ struct iio_dev *indio_dev)
+{
+ bool open_drain, active_high, latch;
+ struct fwnode_handle *fwnode;
+ enum bmi323_irq_pin irq_pin;
+ int ret, irq, irq_type;
+ struct irq_data *desc;
+
+ fwnode = dev_fwnode(data->dev);
+ if (!fwnode)
+ return -ENODEV;
+
+ irq = fwnode_irq_get_byname(fwnode, "INT1");
+ if (irq > 0) {
+ irq_pin = BMI323_IRQ_INT1;
+ } else {
+ irq = fwnode_irq_get_byname(fwnode, "INT2");
+ if (irq < 0)
+ return 0;
+
+ irq_pin = BMI323_IRQ_INT2;
+ }
+
+ desc = irq_get_irq_data(irq);
+ if (!desc)
+ return dev_err_probe(data->dev, -EINVAL,
+ "Could not find IRQ %d\n", irq);
+
+ irq_type = irqd_get_trigger_type(desc);
+ switch (irq_type) {
+ case IRQF_TRIGGER_RISING:
+ latch = false;
+ active_high = true;
+ break;
+ case IRQF_TRIGGER_HIGH:
+ latch = true;
+ active_high = true;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ latch = false;
+ active_high = false;
+ break;
+ case IRQF_TRIGGER_LOW:
+ latch = true;
+ active_high = false;
+ break;
+ default:
+ return dev_err_probe(data->dev, -EINVAL,
+ "Invalid interrupt type 0x%x specified\n",
+ irq_type);
+ }
+
+ open_drain = fwnode_property_read_bool(fwnode, "drive-open-drain");
+
+ ret = bmi323_int_pin_config(data, irq_pin, active_high, open_drain,
+ latch);
+ if (ret)
+ return dev_err_probe(data->dev, ret,
+ "Failed to configure irq line\n");
+
+ data->trig = devm_iio_trigger_alloc(data->dev, "%s-trig-%d",
+ indio_dev->name, irq_pin);
+ if (!data->trig)
+ return -ENOMEM;
+
+ data->trig->ops = &bmi323_trigger_ops;
+ iio_trigger_set_drvdata(data->trig, data);
+
+ ret = devm_request_threaded_irq(data->dev, irq, NULL,
+ bmi323_irq_thread_handler,
+ IRQF_ONESHOT, "bmi323-int", indio_dev);
+ if (ret)
+ return dev_err_probe(data->dev, ret, "Failed to request IRQ\n");
+
+ ret = devm_iio_trigger_register(data->dev, data->trig);
+ if (ret)
+ return dev_err_probe(data->dev, ret,
+ "Trigger registration failed\n");
+
+ data->irq_pin = irq_pin;
+
+ return 0;
+}
+
+static int bmi323_feature_engine_enable(struct bmi323_data *data, bool en)
+{
+ unsigned int feature_status;
+ int ret;
+
+ if (!en)
+ return regmap_write(data->regmap, BMI323_FEAT_CTRL_REG, 0);
+
+ ret = regmap_write(data->regmap, BMI323_FEAT_IO2_REG, 0x012c);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(data->regmap, BMI323_FEAT_IO_STATUS_REG,
+ BMI323_FEAT_IO_STATUS_MSK);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(data->regmap, BMI323_FEAT_CTRL_REG,
+ BMI323_FEAT_ENG_EN_MSK);
+ if (ret)
+ return ret;
+
+ /*
+ * It takes around 4 msec to enable the Feature engine, so check
+ * the status of the feature engine every 2 msec for a maximum
+ * of 5 trials.
+ */
+ ret = regmap_read_poll_timeout(data->regmap, BMI323_FEAT_IO1_REG,
+ feature_status,
+ FIELD_GET(BMI323_FEAT_IO1_ERR_MSK,
+ feature_status) == 1,
+ BMI323_FEAT_ENG_POLL,
+ BMI323_FEAT_ENG_TIMEOUT);
+ if (ret)
+ return dev_err_probe(data->dev, -EINVAL,
+ "Failed to enable feature engine\n");
+
+ return 0;
+}
+
+static void bmi323_disable(void *data_ptr)
+{
+ struct bmi323_data *data = data_ptr;
+
+ bmi323_set_mode(data, BMI323_ACCEL, ACC_GYRO_MODE_DISABLE);
+ bmi323_set_mode(data, BMI323_GYRO, ACC_GYRO_MODE_DISABLE);
+}
+
+static int bmi323_set_bw(struct bmi323_data *data,
+ enum bmi323_sensor_type sensor, enum bmi323_3db_bw bw)
+{
+ return regmap_update_bits(data->regmap, bmi323_hw[sensor].config,
+ BMI323_ACC_GYRO_CONF_BW_MSK,
+ FIELD_PREP(BMI323_ACC_GYRO_CONF_BW_MSK, bw));
+}
+
+static int bmi323_init(struct bmi323_data *data)
+{
+ int ret, val;
+
+ /*
+ * Perform soft reset to make sure the device is in a known state after
+ * start up. A delay of 1.5 ms is required after reset.
+ * See datasheet section 5.17 "Soft Reset".
+ */
+ ret = regmap_write(data->regmap, BMI323_CMD_REG, BMI323_RST_VAL);
+ if (ret)
+ return ret;
+
+ usleep_range(1500, 2000);
+
+ /*
+ * Dummy read is required to enable SPI interface after reset.
+ * See datasheet section 7.2.1 "Protocol Selection".
+ */
+ regmap_read(data->regmap, BMI323_CHIP_ID_REG, &val);
+
+ ret = regmap_read(data->regmap, BMI323_STATUS_REG, &val);
+ if (ret)
+ return ret;
+
+ if (!FIELD_GET(BMI323_STATUS_POR_MSK, val))
+ return dev_err_probe(data->dev, -EINVAL,
+ "Sensor initialization error\n");
+
+ ret = regmap_read(data->regmap, BMI323_CHIP_ID_REG, &val);
+ if (ret)
+ return ret;
+
+ if (FIELD_GET(BMI323_CHIP_ID_MSK, val) != BMI323_CHIP_ID_VAL)
+ return dev_err_probe(data->dev, -EINVAL, "Chip ID mismatch\n");
+
+ ret = bmi323_feature_engine_enable(data, true);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(data->regmap, BMI323_ERR_REG, &val);
+ if (ret)
+ return ret;
+
+ if (val)
+ return dev_err_probe(data->dev, -EINVAL,
+ "Sensor power error = 0x%x\n", val);
+
+ /*
+ * Set the Bandwidth coefficient which defines the 3 dB cutoff
+ * frequency in relation to the ODR.
+ */
+ ret = bmi323_set_bw(data, BMI323_ACCEL, BMI323_BW_ODR_BY_2);
+ if (ret)
+ return ret;
+
+ ret = bmi323_set_bw(data, BMI323_GYRO, BMI323_BW_ODR_BY_2);
+ if (ret)
+ return ret;
+
+ ret = bmi323_set_odr(data, BMI323_ACCEL, 25, 0);
+ if (ret)
+ return ret;
+
+ ret = bmi323_set_odr(data, BMI323_GYRO, 25, 0);
+ if (ret)
+ return ret;
+
+ return devm_add_action_or_reset(data->dev, bmi323_disable, data);
+}
+
+int bmi323_core_probe(struct device *dev)
+{
+ static const char * const regulator_names[] = { "vdd", "vddio" };
+ struct iio_dev *indio_dev;
+ struct bmi323_data *data;
+ struct regmap *regmap;
+ int ret;
+
+ regmap = dev_get_regmap(dev, NULL);
+ if (!regmap)
+ return dev_err_probe(dev, -ENODEV, "Failed to get regmap\n");
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return dev_err_probe(dev, -ENOMEM,
+ "Failed to allocate device\n");
+
+ ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names),
+ regulator_names);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enable regulators\n");
+
+ data = iio_priv(indio_dev);
+ data->dev = dev;
+ data->regmap = regmap;
+ mutex_init(&data->mutex);
+
+ ret = bmi323_init(data);
+ if (ret)
+ return -EINVAL;
+
+ ret = iio_read_mount_matrix(dev, &data->orientation);
+ if (ret)
+ return ret;
+
+ indio_dev->name = "bmi323-imu";
+ indio_dev->info = &bmi323_info;
+ indio_dev->channels = bmi323_channels;
+ indio_dev->num_channels = ARRAY_SIZE(bmi323_channels);
+ indio_dev->available_scan_masks = bmi323_avail_scan_masks;
+ indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+ dev_set_drvdata(data->dev, indio_dev);
+
+ ret = bmi323_trigger_probe(data, indio_dev);
+ if (ret)
+ return -EINVAL;
+
+ ret = devm_iio_triggered_buffer_setup_ext(data->dev, indio_dev,
+ &iio_pollfunc_store_time,
+ bmi323_trigger_handler,
+ IIO_BUFFER_DIRECTION_IN,
+ &bmi323_buffer_ops,
+ bmi323_fifo_attributes);
+ if (ret)
+ return dev_err_probe(data->dev, ret,
+ "Failed to setup trigger buffer\n");
+
+ ret = devm_iio_device_register(data->dev, indio_dev);
+ if (ret)
+ return dev_err_probe(data->dev, ret,
+ "Unable to register iio device\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(bmi323_core_probe, IIO_BMI323);
+
+MODULE_DESCRIPTION("Bosch BMI323 IMU driver");
+MODULE_AUTHOR("Jagath Jog J <jagathjog1996@...il.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bmi323/bmi323_i2c.c b/drivers/iio/imu/bmi323/bmi323_i2c.c
new file mode 100644
index 000000000000..0008e186367d
--- /dev/null
+++ b/drivers/iio/imu/bmi323/bmi323_i2c.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * I2C driver for Bosch BMI323 6-Axis IMU.
+ *
+ * Copyright (C) 2023, Jagath Jog J <jagathjog1996@...il.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bmi323.h"
+
+struct bmi323_i2c_priv {
+ struct i2c_client *i2c;
+ u8 i2c_rx_buffer[BMI323_FIFO_LENGTH_IN_BYTES + BMI323_I2C_DUMMY];
+};
+
+/*
+ * From BMI323 datasheet section 4: Notes on the Serial Interface Support.
+ * Each I2C register read operation requires to read two dummy bytes before
+ * the actual payload.
+ */
+static int bmi323_regmap_i2c_read(void *context, const void *reg_buf,
+ size_t reg_size, void *val_buf,
+ size_t val_size)
+{
+ struct bmi323_i2c_priv *priv = context;
+ struct i2c_msg msgs[2];
+ int ret;
+
+ msgs[0].addr = priv->i2c->addr;
+ msgs[0].flags = priv->i2c->flags;
+ msgs[0].len = reg_size;
+ msgs[0].buf = (u8 *)reg_buf;
+
+ msgs[1].addr = priv->i2c->addr;
+ msgs[1].len = val_size + BMI323_I2C_DUMMY;
+ msgs[1].buf = priv->i2c_rx_buffer;
+ msgs[1].flags = priv->i2c->flags | I2C_M_RD;
+
+ ret = i2c_transfer(priv->i2c->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return -EIO;
+
+ memcpy(val_buf, priv->i2c_rx_buffer + BMI323_I2C_DUMMY, val_size);
+
+ return 0;
+}
+
+static int bmi323_regmap_i2c_write(void *context, const void *data,
+ size_t count)
+{
+ struct bmi323_i2c_priv *priv = context;
+ u8 reg;
+
+ reg = *(u8 *)data;
+ return i2c_smbus_write_i2c_block_data(priv->i2c, reg,
+ count - sizeof(u8),
+ data + sizeof(u8));
+}
+
+static struct regmap_bus bmi323_regmap_bus = {
+ .read = bmi323_regmap_i2c_read,
+ .write = bmi323_regmap_i2c_write,
+};
+
+const struct regmap_config bmi323_i2c_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = BMI323_CFG_RES_REG,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int bmi323_i2c_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct bmi323_i2c_priv *priv;
+ struct regmap *regmap;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->i2c = i2c;
+ regmap = devm_regmap_init(dev, &bmi323_regmap_bus, priv,
+ &bmi323_i2c_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to initialize I2C Regmap\n");
+
+ return bmi323_core_probe(dev);
+}
+
+static const struct i2c_device_id bmi323_i2c_ids[] = {
+ { "bmi323" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bmi323_i2c_ids);
+
+static const struct of_device_id bmi323_of_i2c_match[] = {
+ { .compatible = "bosch,bmi323" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bmi323_of_i2c_match);
+
+static struct i2c_driver bmi323_i2c_driver = {
+ .driver = {
+ .name = "bmi323",
+ .of_match_table = bmi323_of_i2c_match,
+ },
+ .probe = bmi323_i2c_probe,
+ .id_table = bmi323_i2c_ids,
+};
+module_i2c_driver(bmi323_i2c_driver);
+
+MODULE_DESCRIPTION("Bosch BMI323 IMU driver");
+MODULE_AUTHOR("Jagath Jog J <jagathjog1996@...il.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_BMI323);
diff --git a/drivers/iio/imu/bmi323/bmi323_spi.c b/drivers/iio/imu/bmi323/bmi323_spi.c
new file mode 100644
index 000000000000..6dc3352dd714
--- /dev/null
+++ b/drivers/iio/imu/bmi323/bmi323_spi.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SPI driver for Bosch BMI323 6-Axis IMU.
+ *
+ * Copyright (C) 2023, Jagath Jog J <jagathjog1996@...il.com>
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "bmi323.h"
+
+/*
+ * From BMI323 datasheet section 4: Notes on the Serial Interface Support.
+ * Each SPI register read operation requires to read one dummy byte before
+ * the actual payload.
+ */
+static int bmi323_regmap_spi_read(void *context, const void *reg_buf,
+ size_t reg_size, void *val_buf,
+ size_t val_size)
+{
+ struct spi_device *spi = context;
+
+ return spi_write_then_read(spi, reg_buf, reg_size, val_buf, val_size);
+}
+
+static int bmi323_regmap_spi_write(void *context, const void *data,
+ size_t count)
+{
+ struct spi_device *spi = context;
+ u8 *data_buff = (u8 *)data;
+
+ data_buff[1] = data_buff[0];
+ return spi_write(spi, data_buff + 1, count - 1);
+}
+
+static struct regmap_bus bmi323_regmap_bus = {
+ .read = bmi323_regmap_spi_read,
+ .write = bmi323_regmap_spi_write,
+};
+
+const struct regmap_config bmi323_spi_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .pad_bits = 8,
+ .read_flag_mask = BIT(7),
+ .max_register = BMI323_CFG_RES_REG,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int bmi323_spi_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init(dev, &bmi323_regmap_bus, dev,
+ &bmi323_spi_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to initialize SPI Regmap\n");
+
+ return bmi323_core_probe(dev);
+}
+
+static const struct spi_device_id bmi323_spi_ids[] = {
+ { "bmi323" },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, bmi323_spi_ids);
+
+static const struct of_device_id bmi323_of_spi_match[] = {
+ { .compatible = "bosch,bmi323" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bmi323_of_spi_match);
+
+static struct spi_driver bmi323_spi_driver = {
+ .driver = {
+ .name = "bmi323",
+ .of_match_table = bmi323_of_spi_match,
+ },
+ .probe = bmi323_spi_probe,
+ .id_table = bmi323_spi_ids,
+};
+module_spi_driver(bmi323_spi_driver);
+
+MODULE_DESCRIPTION("Bosch BMI323 IMU driver");
+MODULE_AUTHOR("Jagath Jog J <jagathjog1996@...il.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_BMI323);
--
2.20.1
Powered by blists - more mailing lists