[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231013-bq_leds-v1-1-cc374369fc56@apitzsch.eu>
Date: Fri, 13 Oct 2023 22:51:36 +0200
From: André Apitzsch <git@...tzsch.eu>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
André Apitzsch <git@...tzsch.eu>,
Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 1/2] arm64: dts: qcom: msm8916-longcheer-l8910: Enable RGB
LED
l8910 uses KTD2026 LED driver. Add it to the device tree.
Tested-by: Stephan Gerhold <stephan@...hold.net>
Signed-off-by: André Apitzsch <git@...tzsch.eu>
---
.../boot/dts/qcom/msm8916-longcheer-l8910.dts | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 41cadb906b98..68258cf4205f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -6,6 +6,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -74,6 +75,46 @@ usb_id: usb-id {
};
};
+&blsp_i2c2 {
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&status_led_default>;
+ pinctrl-names = "default";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+};
+
&blsp_i2c3 {
status = "okay";
@@ -107,6 +148,16 @@ &blsp_uart2 {
status = "okay";
};
+&pm8916_gpios {
+ status_led_default: status-led-default-state {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <PM8916_GPIO_VPH>;
+ bias-disable;
+ output-high;
+ };
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
--
2.42.0
Powered by blists - more mailing lists