| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231013110150.4142508-4-danishanwar@ti.com>
Date: Fri, 13 Oct 2023 16:31:50 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Vignesh Raghavendra <vigneshr@...com>, Nishanth Menon <nm@...com>
CC: Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tero Kristo <kristo@...nel.org>, <srk@...com>,
<r-gunasekaran@...com>, MD Danish Anwar <danishanwar@...com>
Subject: [PATCH v5 3/3] arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
The IDK application board has 4 Gigabit Ethernet ports.
This patch adds support for the 4 Gigabit Ethernet ports
which are provided by ICSSG0 and ICSSG1.
The IEP0 SYNC_OUT0 pins are used for PPS out on the IDK card.
Signed-off-by: MD Danish Anwar <danishanwar@...com>
---
arch/arm64/boot/dts/ti/Makefile | 2 +
arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 +++++++++++++++++++++++
2 files changed, 298 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 7cfa11f33a43..34b0b06a627b 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
# Boards with AM65x SoC
k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
+k3-am654-idk-dtbs := k3-am654-base-board.dtb k3-am654-idk.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
@@ -55,6 +56,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-idk.dtb
# Boards with J7200 SoC
k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
diff --git a/arch/arm64/boot/dts/ti/k3-am654-idk.dtso b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso
new file mode 100644
index 000000000000..150428dfce6f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for IDK application board on AM654 EVM
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ aliases {
+ ethernet3 = "/icssg0-eth/ethernet-ports/port@0";
+ ethernet4 = "/icssg0-eth/ethernet-ports/port@1";
+ ethernet5 = "/icssg1-eth/ethernet-ports/port@0";
+ ethernet6 = "/icssg1-eth/ethernet-ports/port@1";
+ };
+
+ /* Ethernet node on PRU-ICSSG0 */
+ icssg0_eth: icssg0-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg0_mii_g_rt>;
+ ti,mii-rt = <&icssg0_mii_rt>;
+ ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+
+ interrupt-parent = <&icssg0_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+ <&main_udmap 0xc101>, /* egress slice 0 */
+ <&main_udmap 0xc102>, /* egress slice 0 */
+ <&main_udmap 0xc103>, /* egress slice 0 */
+ <&main_udmap 0xc104>, /* egress slice 1 */
+ <&main_udmap 0xc105>, /* egress slice 1 */
+ <&main_udmap 0xc106>, /* egress slice 1 */
+ <&main_udmap 0xc107>, /* egress slice 1 */
+
+ <&main_udmap 0x4100>, /* ingress slice 0 */
+ <&main_udmap 0x4101>, /* ingress slice 1 */
+ <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */
+ <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg0_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg0_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg0_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg0_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
+ /* Ethernet node on PRU-ICSSG1 */
+ icssg1_eth: icssg1-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg1_mii_g_rt>;
+ ti,mii-rt = <&icssg1_mii_rt>;
+ ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
+
+ interrupt-parent = <&icssg1_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc200>, /* egress slice 0 */
+ <&main_udmap 0xc201>, /* egress slice 0 */
+ <&main_udmap 0xc202>, /* egress slice 0 */
+ <&main_udmap 0xc203>, /* egress slice 0 */
+ <&main_udmap 0xc204>, /* egress slice 1 */
+ <&main_udmap 0xc205>, /* egress slice 1 */
+ <&main_udmap 0xc206>, /* egress slice 1 */
+ <&main_udmap 0xc207>, /* egress slice 1 */
+
+ <&main_udmap 0x4200>, /* ingress slice 0 */
+ <&main_udmap 0x4201>, /* ingress slice 1 */
+ <&main_udmap 0x4202>, /* mgmnt rsp slice 0 */
+ <&main_udmap 0x4203>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg1_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg1_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4110>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg1_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg1_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4114>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+
+ icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+ AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+ >;
+ };
+
+ icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+ AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+ AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+ AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+ AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+ AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+ AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+ AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+ AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+ AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+ AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+ AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+ AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+ AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+ AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+ AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+ AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+ AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+ AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+ AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+ AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+ >;
+ };
+
+ icssg0_iep0_pins_default: icssg0-iep0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0240, PIN_INPUT, 2) /* (U24) PRG0_PRU0_GPO19.PRG0_IEP0_EDC_SYNC_OUT0 */
+ >;
+ };
+
+ icssg1_mdio_pins_default: icssg1-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0180, PIN_INPUT, 0) /* (AD18) PRG1_MDIO0_MDIO */
+ AM65X_IOPAD(0x0184, PIN_OUTPUT, 0) /* (AH18) PRG1_MDIO0_MDC */
+ >;
+ };
+
+ icssg1_rgmii_pins_default: icssg1-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0130, PIN_INPUT, 2) /* (AH24) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+ AM65X_IOPAD(0x0134, PIN_INPUT, 2) /* (AH23) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+ AM65X_IOPAD(0x0138, PIN_INPUT, 2) /* (AG21) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+ AM65X_IOPAD(0x013c, PIN_INPUT, 2) /* (AH22) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+ AM65X_IOPAD(0x0160, PIN_OUTPUT, 2) /* (AE20) PRG1_PRU1_GPO12.PRG1_RGMII2_TD0 */
+ AM65X_IOPAD(0x0164, PIN_OUTPUT, 2) /* (AF19) PRG1_PRU1_GPO13.PRG1_RGMII2_TD1 */
+ AM65X_IOPAD(0x0168, PIN_OUTPUT, 2) /* (AH19) PRG1_PRU1_GPO14.PRG1_RGMII2_TD2 */
+ AM65X_IOPAD(0x016c, PIN_OUTPUT, 2) /* (AG19) PRG1_PRU1_GPO15.PRG1_RGMII2_TD3 */
+ AM65X_IOPAD(0x0170, PIN_INPUT, 2) /* (AE19) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+ AM65X_IOPAD(0x015c, PIN_OUTPUT, 2) /* (AC20) PRG1_PRU1_GPO11.PRG1_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x0148, PIN_INPUT, 2) /* (AG22) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+ AM65X_IOPAD(0x0140, PIN_INPUT, 2) /* (AE21) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x00e0, PIN_INPUT, 2) /* (AE22) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+ AM65X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AG24) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+ AM65X_IOPAD(0x00e8, PIN_INPUT, 2) /* (AF23) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+ AM65X_IOPAD(0x00ec, PIN_INPUT, 2) /* (AD21) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+ AM65X_IOPAD(0x0110, PIN_OUTPUT, 2) /* (AH20) PRG1_PRU0_GPO12.PRG1_RGMII1_TD0 */
+ AM65X_IOPAD(0x0114, PIN_OUTPUT, 2) /* (AH21) PRG1_PRU0_GPO13.PRG1_RGMII1_TD1 */
+ AM65X_IOPAD(0x0118, PIN_OUTPUT, 2) /* (AG20) PRG1_PRU0_GPO14.PRG1_RGMII1_TD2 */
+ AM65X_IOPAD(0x011c, PIN_OUTPUT, 2) /* (AD19) PRG1_PRU0_GPO15.PRG1_RGMII1_TD3 */
+ AM65X_IOPAD(0x0120, PIN_INPUT, 2) /* (AD20) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+ AM65X_IOPAD(0x010c, PIN_OUTPUT, 2) /* (AF21) PRG1_PRU0_GPO11.PRG1_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x00f8, PIN_INPUT, 2) /* (AF22) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+ AM65X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AG23) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+ >;
+ };
+
+ icssg1_iep0_pins_default: icssg1-iep0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x012c, PIN_INPUT, 2) /* (AG26) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */
+ >;
+ };
+};
+
+&icssg0_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg0_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg0_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&icssg0_iep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_iep0_pins_default>;
+};
+
+&icssg1_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg1_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg1_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&icssg1_iep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_iep0_pins_default>;
+};
--
2.34.1
Powered by blists - more mailing lists