linux-kernel - [PATCH v4 0/3] clk: si5351: add option to adjust PLL without glitches

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231014-alvin-clk-si5351-no-pll-reset-v4-0-a3567024007d@bang-olufsen.dk>
Date:   Sat, 14 Oct 2023 20:19:40 +0200
From:   Alvin Šipraga <alvin@...s.dk>
To:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Alvin Šipraga <alsi@...g-olufsen.dk>
Cc:     Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Rabeeh Khoury <rabeeh@...id-run.com>,
        Jacob Siverskog <jacob@...nage.engineering>,
        Sergej Sawazki <sergej@...dac.com>, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4 0/3] clk: si5351: add option to adjust PLL without
 glitches

This series intends to address a problem I had when using the Si5351A as
a runtime adjustable audio bit clock. The basic issue is that the driver
in its current form unconditionally resets the PLL whenever adjusting
its rate. But this reset causes an unwanted ~1.4 ms LOW signal glitch in
the clock output.

As a remedy, a new property is added to control the reset behaviour of
the PLLs more precisely. In the process I also converted the bindings to
YAML.

Changes:

v3 -> v4:

- remove spurious | per Rob's suggestion
- simplify conditional clocks/clock-names per Rob's suggestion
- remove mention of clkout[0-7] still being admissible in the commit
  body of patch 1 - while the Linux driver still tolerates this, the
  new dt-bindings do not

v2 -> v3:

- address further comments from Rob:
  - drop unnecessary refs and minItems
  - simplify if conditions for chip variants
  - ignore his comment about dropping '|', as line would be >80 columns
  - move additionalProperties: false close to type: object
  - define clocks/clock-names at top-level
- drop patch to dove-cubox dts per Krzysztof's comment - will send
  separately
- collect Sebastian's Acked-by

v1 -> v2:

- address Rob's comments on the two dt-bindings patches
- new patch to correct the clock node names in the only upstream device
  tree using si5351

---
Alvin Šipraga (3):
      dt-bindings: clock: si5351: convert to yaml
      dt-bindings: clock: si5351: add PLL reset mode property
      clk: si5351: allow PLLs to be adjusted without reset

 .../devicetree/bindings/clock/silabs,si5351.txt    | 126 ----------
 .../devicetree/bindings/clock/silabs,si5351.yaml   | 269 +++++++++++++++++++++
 drivers/clk/clk-si5351.c                           |  47 +++-
 include/linux/platform_data/si5351.h               |   2 +
 4 files changed, 315 insertions(+), 129 deletions(-)
---
base-commit: b7c08e5d3824bc57182b308c1e158ddfdbe4cd00
change-id: 20231014-alvin-clk-si5351-no-pll-reset-ecfac0a6550c