[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0ca84efc-c999-4077-85aa-e13fd0984182@kunbus.com>
Date: Sun, 15 Oct 2023 15:03:20 +0200
From: Lino Sanfilippo <l.sanfilippo@...bus.com>
To: gregkh@...uxfoundation.org, jirislaby@...nel.org,
ilpo.jarvinen@...ux.intel.com, u.kleine-koenig@...gutronix.de
Cc: shawnguo@...nel.org, s.hauer@...gutronix.de,
mcoquelin.stm32@...il.com, alexandre.torgue@...s.st.com,
cniedermaier@...electronics.com, linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org, LinoSanfilippo@....de,
lukas@...ner.de, p.rosenberger@...bus.com
Subject: Re: [PATCH v3 0/6] Fixes and improvements for RS485
Ccing Uwe.
On 11.10.23 20:15, Lino Sanfilippo wrote:
> The following series includes some fixes and improvements around RS485 in
> the serial core and UART drivers:
>
> Patch 1: Do not hold the port lock when setting rx-during-tx GPIO
> Patch 2: Get rid of useless wrapper pl011_get_rs485_mode()
> Patch 3: set missing supported flag for RX during TX GPIO
> Patch 4: fix sanitizing check for RTS settings
> Patch 5: make sure RS485 is cannot be enabled when it is not supported
> Patch 6: imx: do not set RS485 enabled if it is not supported
> Patch 7: omap: do not override settings for rs485 support
>
> Changes in v2:
> - add missing 'Fixes' tags as requested by Greg
> - corrected a typo as pointed out by Hugo
> - fix issue in imx driver in the serial core as suggested by Uwe
> - partly rephrase some commit messages
> - add patch 7
>
> Changes in v3
> - Drop patch "Get rid of useless wrapper pl011_get_rs485_mode()" as
> requested by Greg
>
Sorry Uwe, you gave valuable input for the former version of this series and I
just noticed now that I forgot to Cc you for this version.
BR,
Lino
Powered by blists - more mailing lists