| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DU0PR02MB78998961117757F4750A3AFFC4D0A@DU0PR02MB7899.eurprd02.prod.outlook.com>
Date: Sun, 15 Oct 2023 18:10:22 +0100
From: Cameron Williams <cang1@...e.co.uk>
To: gregkh@...uxfoundation.org, jirislaby@...nel.org,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Cc: Cameron Williams <cang1@...e.co.uk>
Subject: [PATCH v3 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.
Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.
Signed-off-by: Cameron Williams <cang1@...e.co.uk>
---
v2 - v3:
Re-submit patch series using git send-email to make threading work.
v1 - v2:
This is a resubmission series for the patch series below. That series
was lots of changes sent to lots of maintainers, this series is just for
the tty/serial/8250 subsystem.
[1] https://lore.kernel.org/all/DU0PR02MB789950E64D808DB57E9D7312C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[2] https://lore.kernel.org/all/DU0PR02MB7899DE53DFC900EFB50E53F2C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[3] https://lore.kernel.org/all/DU0PR02MB7899033E7E81EAF3694BC20AC4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[4] https://lore.kernel.org/all/DU0PR02MB7899EABA8C3DCAC94DCC79D4C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
drivers/tty/serial/8250/8250_pci.c | 147 +++++++++++++++++++++++++++++
1 file changed, 147 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 82b445ddedb4..8242918970f6 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2429,6 +2429,153 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.init = pci_oxsemi_tornado_init,
.setup = pci_oxsemi_tornado_setup,
},
+ /*
+ * Brainboxes devices - all Oxsemi based
+ */
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4027,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4028,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4029,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4019,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4016,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4015,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400A,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400E,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400C,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400B,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400F,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4010,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4011,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x401D,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x401E,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4013,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4017,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4018,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
--
2.42.0
Powered by blists - more mailing lists