[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <5646ce8ce4dc732edd44aa2ee389c73d5b296350.1697471314.git.isaku.yamahata@intel.com>
Date: Mon, 16 Oct 2023 09:14:24 -0700
From: isaku.yamahata@...el.com
To: kvm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: isaku.yamahata@...el.com, isaku.yamahata@...il.com,
Paolo Bonzini <pbonzini@...hat.com>, erdemaktas@...gle.com,
Sean Christopherson <seanjc@...gle.com>,
Sagi Shahar <sagis@...gle.com>,
David Matlack <dmatlack@...gle.com>,
Kai Huang <kai.huang@...el.com>,
Zhi Wang <zhi.wang.linux@...il.com>, chen.bo@...el.com,
hang.yuan@...el.com, tina.zhang@...el.com,
Xiaoyao Li <xiaoyao.li@...el.com>,
Sean Christopherson <sean.j.christopherson@...el.com>,
Chao Gao <chao.gao@...el.com>
Subject: [PATCH v16 072/116] KVM: x86: Add a switch_db_regs flag to handle TDX's auto-switched behavior
From: Isaku Yamahata <isaku.yamahata@...el.com>
Add a flag, KVM_DEBUGREG_AUTO_SWITCHED_GUEST, to skip saving/restoring DRs
irrespective of any other flags. TDX-SEAM unconditionally saves and
restores guest DRs and reset to architectural INIT state on TD exit.
So, KVM needs to save host DRs before TD enter without restoring guest DRs
and restore host DRs after TD exit.
Opportunistically convert the KVM_DEBUGREG_* definitions to use BIT().
Reported-by: Xiaoyao Li <xiaoyao.li@...el.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@...el.com>
Co-developed-by: Chao Gao <chao.gao@...el.com>
Signed-off-by: Chao Gao <chao.gao@...el.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@...el.com>
---
arch/x86/include/asm/kvm_host.h | 10 ++++++++--
arch/x86/kvm/vmx/tdx.c | 1 +
arch/x86/kvm/x86.c | 11 ++++++++---
3 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 777981e97f1a..b19e8eac4c80 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -604,8 +604,14 @@ struct kvm_pmu {
struct kvm_pmu_ops;
enum {
- KVM_DEBUGREG_BP_ENABLED = 1,
- KVM_DEBUGREG_WONT_EXIT = 2,
+ KVM_DEBUGREG_BP_ENABLED = BIT(0),
+ KVM_DEBUGREG_WONT_EXIT = BIT(1),
+ /*
+ * Guest debug registers (DR0-3 and DR6) are saved/restored by hardware
+ * on exit from or enter to guest. KVM needn't switch them. Because DR7
+ * is cleared on exit from guest, DR7 need to be saved/restored.
+ */
+ KVM_DEBUGREG_AUTO_SWITCH = BIT(2),
};
struct kvm_mtrr_range {
diff --git a/arch/x86/kvm/vmx/tdx.c b/arch/x86/kvm/vmx/tdx.c
index 511ba2496372..b936c98f601c 100644
--- a/arch/x86/kvm/vmx/tdx.c
+++ b/arch/x86/kvm/vmx/tdx.c
@@ -560,6 +560,7 @@ int tdx_vcpu_create(struct kvm_vcpu *vcpu)
vcpu->arch.efer = EFER_SCE | EFER_LME | EFER_LMA | EFER_NX;
+ vcpu->arch.switch_db_regs = KVM_DEBUGREG_AUTO_SWITCH;
vcpu->arch.cr0_guest_owned_bits = -1ul;
vcpu->arch.cr4_guest_owned_bits = -1ul;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 916c462f7d8b..a75b0b9ce9bf 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -10792,7 +10792,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
if (vcpu->arch.guest_fpu.xfd_err)
wrmsrl(MSR_IA32_XFD_ERR, vcpu->arch.guest_fpu.xfd_err);
- if (unlikely(vcpu->arch.switch_db_regs)) {
+ if (unlikely(vcpu->arch.switch_db_regs & ~KVM_DEBUGREG_AUTO_SWITCH)) {
set_debugreg(0, 7);
set_debugreg(vcpu->arch.eff_db[0], 0);
set_debugreg(vcpu->arch.eff_db[1], 1);
@@ -10838,6 +10838,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
*/
if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) {
WARN_ON(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP);
+ WARN_ON(vcpu->arch.switch_db_regs & KVM_DEBUGREG_AUTO_SWITCH);
static_call(kvm_x86_sync_dirty_debug_regs)(vcpu);
kvm_update_dr0123(vcpu);
kvm_update_dr7(vcpu);
@@ -10850,8 +10851,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
* care about the messed up debug address registers. But if
* we have some of them active, restore the old state.
*/
- if (hw_breakpoint_active())
- hw_breakpoint_restore();
+ if (hw_breakpoint_active()) {
+ if (!(vcpu->arch.switch_db_regs & KVM_DEBUGREG_AUTO_SWITCH))
+ hw_breakpoint_restore();
+ else
+ set_debugreg(__this_cpu_read(cpu_dr7), 7);
+ }
vcpu->arch.last_vmentry_cpu = vcpu->cpu;
vcpu->arch.last_guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc());
--
2.25.1
Powered by blists - more mailing lists