| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e83985cc-5a82-7ece-366-7a3b1997ed90@linux.intel.com>
Date: Tue, 17 Oct 2023 12:11:42 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Ma Jun <Jun.Ma2@....com>
cc: amd-gfx@...ts.freedesktop.org, lenb@...nel.org,
johannes@...solutions.net, davem@...emloft.net,
edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
alexander.deucher@....com, Lijo.Lazar@....com,
mario.limonciello@....com, majun@....com, netdev@...r.kernel.org,
linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org, platform-driver-x86@...r.kernel.org,
Evan Quan <quanliangl@...mail.com>
Subject: Re: [PATCH v12 4/9] wifi: mac80211: Add support for WBRF features
On Tue, 17 Oct 2023, Ma Jun wrote:
> From: Evan Quan <quanliangl@...mail.com>
>
> To support the WBRF mechanism, Wifi adapters utilized in the system must
> register the frequencies in use(or unregister those frequencies no longer
> used) via the dedicated calls. So that, other drivers responding to the
> frequencies can take proper actions to mitigate possible interference.
>
> Co-developed-by: Mario Limonciello <mario.limonciello@....com>
> Signed-off-by: Mario Limonciello <mario.limonciello@....com>
> Co-developed-by: Evan Quan <quanliangl@...mail.com>
> Signed-off-by: Evan Quan <quanliangl@...mail.com>
> Signed-off-by: Ma Jun <Jun.Ma2@....com>
> --
> v1->v2:
> - place the new added member(`wbrf_supported`) in
> ieee80211_local(Johannes)
> - handle chandefs change scenario properly(Johannes)
> - some minor fixes around code sharing and possible invalid input
> checks(Johannes)
> v2->v3:
> - drop unnecessary input checks and intermediate APIs(Mario)
> - Separate some mac80211 common code(Mario, Johannes)
> v3->v4:
> - some minor fixes around return values(Johannes)
> v9->v10:
> - get ranges_in->num_of_ranges set and passed in(Johannes)
> v12:
> - use acpi_amd_wbrf_add_remove to replace the acpi_amd_wbrf_add_exclusion
> acpi_amd_wbrf_remove_exclusion
> ---
> include/linux/ieee80211.h | 1 +
> net/mac80211/Makefile | 2 +
> net/mac80211/chan.c | 9 ++++
> net/mac80211/ieee80211_i.h | 9 ++++
> net/mac80211/main.c | 2 +
> net/mac80211/wbrf.c | 105 +++++++++++++++++++++++++++++++++++++
> 6 files changed, 128 insertions(+)
> create mode 100644 net/mac80211/wbrf.c
>
> diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
> index 4b998090898e..f995d06da87f 100644
> --- a/include/linux/ieee80211.h
> +++ b/include/linux/ieee80211.h
> @@ -4335,6 +4335,7 @@ static inline int ieee80211_get_tdls_action(struct sk_buff *skb, u32 hdr_size)
> /* convert frequencies */
> #define MHZ_TO_KHZ(freq) ((freq) * 1000)
> #define KHZ_TO_MHZ(freq) ((freq) / 1000)
> +#define KHZ_TO_HZ(freq) ((freq) * 1000)
It would be better to not add more of these per subsystem but use the
generic include/linux/units.h constants instead.
> #define PR_KHZ(f) KHZ_TO_MHZ(f), f % 1000
> #define KHZ_F "%d.%03d"
>
> diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
> index b8de44da1fb8..d46c36f55fd3 100644
> --- a/net/mac80211/Makefile
> +++ b/net/mac80211/Makefile
> @@ -65,4 +65,6 @@ rc80211_minstrel-$(CONFIG_MAC80211_DEBUGFS) += \
>
> mac80211-$(CONFIG_MAC80211_RC_MINSTREL) += $(rc80211_minstrel-y)
>
> +mac80211-y += wbrf.o
> +
> ccflags-y += -DDEBUG
> diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
> index 68952752b599..458469c224ae 100644
> --- a/net/mac80211/chan.c
> +++ b/net/mac80211/chan.c
> @@ -506,11 +506,16 @@ static void _ieee80211_change_chanctx(struct ieee80211_local *local,
>
> WARN_ON(!cfg80211_chandef_compatible(&ctx->conf.def, chandef));
>
> + ieee80211_remove_wbrf(local, &ctx->conf.def);
> +
> ctx->conf.def = *chandef;
>
> /* check if min chanctx also changed */
> changed = IEEE80211_CHANCTX_CHANGE_WIDTH |
> _ieee80211_recalc_chanctx_min_def(local, ctx, rsvd_for);
> +
> + ieee80211_add_wbrf(local, &ctx->conf.def);
> +
> drv_change_chanctx(local, ctx, changed);
>
> if (!local->use_chanctx) {
> @@ -668,6 +673,8 @@ static int ieee80211_add_chanctx(struct ieee80211_local *local,
> lockdep_assert_held(&local->mtx);
> lockdep_assert_held(&local->chanctx_mtx);
>
> + ieee80211_add_wbrf(local, &ctx->conf.def);
> +
> if (!local->use_chanctx)
> local->hw.conf.radar_enabled = ctx->conf.radar_enabled;
>
> @@ -748,6 +755,8 @@ static void ieee80211_del_chanctx(struct ieee80211_local *local,
> }
>
> ieee80211_recalc_idle(local);
> +
> + ieee80211_remove_wbrf(local, &ctx->conf.def);
> }
>
> static void ieee80211_free_chanctx(struct ieee80211_local *local,
> diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
> index 91633a0b723e..719f2c892132 100644
> --- a/net/mac80211/ieee80211_i.h
> +++ b/net/mac80211/ieee80211_i.h
> @@ -1600,6 +1600,8 @@ struct ieee80211_local {
>
> /* extended capabilities provided by mac80211 */
> u8 ext_capa[8];
> +
> + bool wbrf_supported;
> };
>
> static inline struct ieee80211_sub_if_data *
> @@ -2638,4 +2640,11 @@ ieee80211_eht_cap_ie_to_sta_eht_cap(struct ieee80211_sub_if_data *sdata,
> const struct ieee80211_eht_cap_elem *eht_cap_ie_elem,
> u8 eht_cap_len,
> struct link_sta_info *link_sta);
> +
> +void ieee80211_check_wbrf_support(struct ieee80211_local *local);
> +void ieee80211_add_wbrf(struct ieee80211_local *local,
> + struct cfg80211_chan_def *chandef);
> +void ieee80211_remove_wbrf(struct ieee80211_local *local,
> + struct cfg80211_chan_def *chandef);
> +
> #endif /* IEEE80211_I_H */
> diff --git a/net/mac80211/main.c b/net/mac80211/main.c
> index 24315d7b3126..b20bdaac84db 100644
> --- a/net/mac80211/main.c
> +++ b/net/mac80211/main.c
> @@ -1396,6 +1396,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
> debugfs_hw_add(local);
> rate_control_add_debugfs(local);
>
> + ieee80211_check_wbrf_support(local);
> +
> rtnl_lock();
> wiphy_lock(hw->wiphy);
>
> diff --git a/net/mac80211/wbrf.c b/net/mac80211/wbrf.c
> new file mode 100644
> index 000000000000..7329f554c7af
> --- /dev/null
> +++ b/net/mac80211/wbrf.c
> @@ -0,0 +1,105 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Wifi Band Exclusion Interface for WLAN
> + * Copyright (C) 2023 Advanced Micro Devices
> + *
> + */
> +
> +#include <linux/acpi_amd_wbrf.h>
> +#include <net/cfg80211.h>
> +#include "ieee80211_i.h"
> +
> +void ieee80211_check_wbrf_support(struct ieee80211_local *local)
> +{
> + struct wiphy *wiphy = local->hw.wiphy;
> + struct device *dev;
> +
> + if (!wiphy)
> + return;
> +
> + dev = wiphy->dev.parent;
> + if (!dev)
> + return;
> +
> + local->wbrf_supported = acpi_amd_wbrf_supported_producer(dev);
> + dev_dbg(dev, "WBRF is %s supported\n",
> + local->wbrf_supported ? "" : "not");
Add a new static inline into include/linux/string_choices.h for
"supported" / "not supported" and use it here.
> +}
> +
> +static void get_chan_freq_boundary(u32 center_freq,
> + u32 bandwidth,
> + u64 *start,
> + u64 *end)
Use less lines.
> +{
> + bandwidth = MHZ_TO_KHZ(bandwidth);
> + center_freq = MHZ_TO_KHZ(center_freq);
> +
> + *start = center_freq - bandwidth / 2;
> + *end = center_freq + bandwidth / 2;
> +
> + /* Frequency in HZ is expected */
No, it's not in HZ but Hz. HZ has a special meaning in kernel.
--
i.
> + *start = KHZ_TO_HZ(*start);
> + *end = KHZ_TO_HZ(*end);
> +}
> +
> +static void get_ranges_from_chandef(struct cfg80211_chan_def *chandef,
> + struct wbrf_ranges_in_out *ranges_in)
> +{
> + u64 start_freq1, end_freq1;
> + u64 start_freq2, end_freq2;
> + int bandwidth;
> +
> + bandwidth = nl80211_chan_width_to_mhz(chandef->width);
> +
> + get_chan_freq_boundary(chandef->center_freq1,
> + bandwidth,
> + &start_freq1,
> + &end_freq1);
> +
> + ranges_in->band_list[0].start = start_freq1;
> + ranges_in->band_list[0].end = end_freq1;
> + ranges_in->num_of_ranges = 1;
> +
> + if (chandef->width == NL80211_CHAN_WIDTH_80P80) {
> + get_chan_freq_boundary(chandef->center_freq2,
> + bandwidth,
> + &start_freq2,
> + &end_freq2);
> +
> + ranges_in->band_list[1].start = start_freq2;
> + ranges_in->band_list[1].end = end_freq2;
> + ranges_in->num_of_ranges++;
> + }
> +}
> +
> +void ieee80211_add_wbrf(struct ieee80211_local *local,
> + struct cfg80211_chan_def *chandef)
> +{
> + struct wbrf_ranges_in_out ranges_in = {0};
> + struct device *dev;
> +
> + if (!local->wbrf_supported)
> + return;
> +
> + dev = local->hw.wiphy->dev.parent;
> +
> + get_ranges_from_chandef(chandef, &ranges_in);
> +
> + acpi_amd_wbrf_add_remove(dev, WBRF_RECORD_ADD, &ranges_in);
> +}
> +
> +void ieee80211_remove_wbrf(struct ieee80211_local *local,
> + struct cfg80211_chan_def *chandef)
> +{
> + struct wbrf_ranges_in_out ranges_in = {0};
> + struct device *dev;
> +
> + if (!local->wbrf_supported)
> + return;
> +
> + dev = local->hw.wiphy->dev.parent;
> +
> + get_ranges_from_chandef(chandef, &ranges_in);
> +
> + acpi_amd_wbrf_add_remove(dev, WBRF_RECORD_REMOVE, &ranges_in);
> +}
>
Powered by blists - more mailing lists