linux-kernel - Re: [PATCH net-next v4 1/2] net: dsa: Use conduit and user terms

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231017100328.qmwi2dnqay7syoki@skbuf>
Date:   Tue, 17 Oct 2023 13:03:28 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     Florian Fainelli <florian.fainelli@...adcom.com>
Cc:     netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Broadcom internal kernel review list 
        <bcm-kernel-feedback-list@...adcom.com>,
        "open list:ARM/Mediatek SoC support" <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH net-next v4 1/2] net: dsa: Use conduit and user terms

On Mon, Oct 16, 2023 at 09:47:41AM -0700, Florian Fainelli wrote:
> Use more inclusive terms throughout the DSA subsystem by moving away
> from "master" which is replaced by "conduit" and "slave" which is
> replaced by "user". No functional changes.
> 
> Signed-off-by: Florian Fainelli <florian.fainelli@...adcom.com>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@....com>

Note that you left the following unconverted:

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index d117e9b1a465..d27c6b70a2f6 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1113,7 +1113,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 	u32 val;
 
 	/* When a new MTU is set, DSA always set the CPU port's MTU to the
-	 * largest MTU of the slave ports. Because the switch only has a global
+	 * largest MTU of the user ports. Because the switch only has a global
 	 * RX length register, only allowing CPU port here is enough.
 	 */
 	if (!dsa_is_cpu_port(ds, port))
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index be2491de173d..42b1acaca33a 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2486,7 +2486,7 @@ static int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
 	else
 		member = MV88E6XXX_G1_VTU_DATA_MEMBER_TAG_TAGGED;
 
-	/* net/dsa/slave.c will call dsa_port_vlan_add() for the affected port
+	/* net/dsa/user.c will call dsa_port_vlan_add() for the affected port
 	 * and then the CPU port. Do not warn for duplicates for the CPU port.
 	 */
 	warn = !dsa_is_cpu_port(ds, port) && !dsa_is_dsa_port(ds, port);
diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c
index d203e4a84441..9243eff8918d 100644
--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -761,7 +761,7 @@ int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 	int ret;
 
 	/* We have only have a general MTU setting.
-	 * DSA always set the CPU port's MTU to the largest MTU of the slave
+	 * DSA always set the CPU port's MTU to the largest MTU of the user
 	 * ports.
 	 * Setting MTU just for the CPU port is sufficient to correctly set a
 	 * value for every port.
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index d171c18dd354..0875e4fc9f57 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -1144,7 +1144,7 @@ static int rtl8365mb_port_change_mtu(struct dsa_switch *ds, int port,
 	int frame_size;
 
 	/* When a new MTU is set, DSA always sets the CPU port's MTU to the
-	 * largest MTU of the slave ports. Because the switch only has a global
+	 * largest MTU of the user ports. Because the switch only has a global
 	 * RX length register, only allowing CPU port here is enough.
 	 */
 	if (!dsa_is_cpu_port(ds, port))