linux-kernel - [PATCH v9 3/3] dts: ti: k3-am625-beagleplay: Add beaglecc1352

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231017101116.178041-4-ayushdevel1325@gmail.com>
Date:   Tue, 17 Oct 2023 15:41:14 +0530
From:   Ayush Singh <ayushdevel1325@...il.com>
To:     greybus-dev@...ts.linaro.org
Cc:     Ayush Singh <ayushdevel1325@...il.com>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, gregkh@...uxfoundation.org,
        vaishnav@...gleboard.org, jkridner@...gleboard.org, nm@...com,
        krzysztof.kozlowski+dt@...aro.org, vigneshr@...com,
        kristo@...nel.org, robh+dt@...nel.org, conor+dt@...nel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v9 3/3] dts: ti: k3-am625-beagleplay: Add beaglecc1352

The BeaglePlay board by BeagleBoard.org has a CC1352P7 co-processor
connected to the main AM62 (running Linux) over UART. In the BeagleConnect
Technology, CC1352 is responsible for handling 6LoWPAN communication with
beagleconnect freedom nodes as well as their discovery.

This mcu is used by gb-beagleplay, a Greybus driver for BeaglePlay.

Signed-off-by: Ayush Singh <ayushdevel1325@...il.com>
---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 7cfdf562b53b..d2e0b11242b6 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -870,6 +870,12 @@ &main_uart6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&wifi_debug_uart_pins_default>;
 	status = "okay";
+
+	mcu {
+		compatible = "ti,cc1352p7";
+		reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
+		vdds-supply = <&vdd_3v3>;
+	};
 };
 
 &dss {
-- 
2.41.0