[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231017120431.68847-9-brgl@bgdev.pl>
Date: Tue, 17 Oct 2023 14:03:26 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Linus Walleij <linus.walleij@...aro.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
Andrew Jeffery <andrew@...econstruct.com.au>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
Subject: [PATCH v3 08/73] gpio: aspeed: use new pinctrl GPIO helpers
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Reviewed-by: Andrew Jeffery <andrew@...econstruct.com.au>
Acked-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
---
drivers/gpio/gpio-aspeed.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 58f107194fda..d3aa1cfd4ace 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -750,12 +750,12 @@ static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset)
if (!have_gpio(gpiochip_get_data(chip), offset))
return -ENODEV;
- return pinctrl_gpio_request(chip->base + offset);
+ return pinctrl_gpio_request_new(chip, offset);
}
static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
{
- pinctrl_gpio_free(chip->base + offset);
+ pinctrl_gpio_free_new(chip, offset);
}
static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs,
@@ -973,7 +973,7 @@ static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
else if (param == PIN_CONFIG_BIAS_DISABLE ||
param == PIN_CONFIG_BIAS_PULL_DOWN ||
param == PIN_CONFIG_DRIVE_STRENGTH)
- return pinctrl_gpio_set_config(chip->base + offset, config);
+ return pinctrl_gpio_set_config_new(chip, offset, config);
else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
/* Return -ENOTSUPP to trigger emulation, as per datasheet */
--
2.39.2
Powered by blists - more mailing lists