[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b24844da-f82c-448d-91bc-bc2a8d2053b1@kernel.org>
Date: Thu, 19 Oct 2023 00:11:27 +0900
From: Chanwoo Choi <chanwoo@...nel.org>
To: Sascha Hauer <s.hauer@...gutronix.de>,
linux-rockchip@...ts.infradead.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, Heiko Stuebner <heiko@...ech.de>,
Kyungmin Park <kyungmin.park@...sung.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Will Deacon <will@...nel.org>,
Mark Rutland <mark.rutland@....com>, kernel@...gutronix.de,
Michael Riesch <michael.riesch@...fvision.net>,
Robin Murphy <robin.murphy@....com>,
Vincent Legoll <vincent.legoll@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>
Subject: Re: [PATCH v8 17/26] PM / devfreq: rockchip-dfi: make register stride
SoC specific
On 23. 10. 18. 15:17, Sascha Hauer wrote:
> The currently supported RK3399 has a stride of 20 between the channel
> specific registers. Upcoming RK3588 has a different stride, so put
> the stride into driver data to make it configurable.
> While at it convert decimal 20 to hex 0x14 for consistency with RK3588
> which has a register stride 0x4000 and we want to write that in hex
> as well.
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Reviewed-by: Sebastian Reichel <sebastian.reichel@...labora.com>
> Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
> ---
>
> Notes:
> Changes since v7:
> - Initialize ddrmon_stride for RK3568 and explain why it's not needed
>
> drivers/devfreq/event/rockchip-dfi.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c
> index 63977f9fc2693..a3d823ac68ace 100644
> --- a/drivers/devfreq/event/rockchip-dfi.c
> +++ b/drivers/devfreq/event/rockchip-dfi.c
> @@ -113,6 +113,7 @@ struct rockchip_dfi {
> int active_events;
> int burst_len;
> int buswidth[DMC_MAX_CHANNELS];
> + int ddrmon_stride;
> };
>
> static int rockchip_dfi_enable(struct rockchip_dfi *dfi)
> @@ -190,13 +191,13 @@ static void rockchip_dfi_read_counters(struct rockchip_dfi *dfi, struct dmc_coun
> if (!(dfi->channel_mask & BIT(i)))
> continue;
> res->c[i].read_access = readl_relaxed(dfi_regs +
> - DDRMON_CH0_RD_NUM + i * 20);
> + DDRMON_CH0_RD_NUM + i * dfi->ddrmon_stride);
> res->c[i].write_access = readl_relaxed(dfi_regs +
> - DDRMON_CH0_WR_NUM + i * 20);
> + DDRMON_CH0_WR_NUM + i * dfi->ddrmon_stride);
> res->c[i].access = readl_relaxed(dfi_regs +
> - DDRMON_CH0_DFI_ACCESS_NUM + i * 20);
> + DDRMON_CH0_DFI_ACCESS_NUM + i * dfi->ddrmon_stride);
> res->c[i].clock_cycles = readl_relaxed(dfi_regs +
> - DDRMON_CH0_COUNT_NUM + i * 20);
> + DDRMON_CH0_COUNT_NUM + i * dfi->ddrmon_stride);
> }
> }
>
> @@ -664,6 +665,8 @@ static int rk3399_dfi_init(struct rockchip_dfi *dfi)
> dfi->buswidth[0] = FIELD_GET(RK3399_PMUGRF_OS_REG2_BW_CH0, val) == 0 ? 4 : 2;
> dfi->buswidth[1] = FIELD_GET(RK3399_PMUGRF_OS_REG2_BW_CH1, val) == 0 ? 4 : 2;
>
> + dfi->ddrmon_stride = 0x14;
> +
> return 0;
> };
>
> @@ -690,6 +693,8 @@ static int rk3568_dfi_init(struct rockchip_dfi *dfi)
>
> dfi->buswidth[0] = FIELD_GET(RK3568_PMUGRF_OS_REG2_BW_CH0, reg2) == 0 ? 4 : 2;
>
> + dfi->ddrmon_stride = 0x0; /* not relevant, we only have a single channel on this SoC */
> +
> return 0;
> };
>
Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
--
Best Regards,
Samsung Electronics
Chanwoo Choi
Powered by blists - more mailing lists