[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <92a18413-fa28-4420-88f8-e7dedaa8c45e@lunn.ch>
Date: Wed, 18 Oct 2023 15:52:27 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Ante Knezic <ante.knezic@...mholz.de>
Cc: netdev@...r.kernel.org, woojung.huh@...rochip.com,
f.fainelli@...il.com, olteanv@...il.com, davem@...emloft.net,
edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, marex@...x.de, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, UNGLinuxDriver@...rochip.com
Subject: Re: [PATCH net-next v3 2/2] net:dsa:microchip: add property to
select internal RMII reference clock
On Wed, Oct 18, 2023 at 11:24:14AM +0200, Ante Knezic wrote:
> Microchip KSZ8863/KSZ8873 have the ability to select between internal
> and external RMII reference clock. By default, reference clock
> needs to be provided via REFCLKI_3 pin. If required, device can be
> setup to provide RMII clock internally so that REFCLKI_3 pin can be
> left unconnected.
> Add a new "microchip,rmii-clk-internal" property which will set
> RMII clock reference to internal. If property is not set, reference
> clock needs to be provided externally.
>
> Signed-off-by: Ante Knezic <ante.knezic@...mholz.de>
> ---
> drivers/net/dsa/microchip/ksz8795.c | 10 +++++++++-
> drivers/net/dsa/microchip/ksz8795_reg.h | 3 +++
> drivers/net/dsa/microchip/ksz_common.h | 1 +
> 3 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
> index 91aba470fb2f..b50ad9552c65 100644
> --- a/drivers/net/dsa/microchip/ksz8795.c
> +++ b/drivers/net/dsa/microchip/ksz8795.c
> @@ -1312,8 +1312,16 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
> ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
>
> if (cpu_port) {
> - if (!ksz_is_ksz88x3(dev))
> + if (!ksz_is_ksz88x3(dev)) {
> ksz8795_cpu_interface_select(dev, port);
> + } else {
> + dev->rmii_clk_internal = of_property_read_bool(dev->dev->of_node,
> + "microchip,rmii-clk-internal");
> +
> + ksz_cfg(dev, KSZ88X3_REG_FVID_AND_HOST_MODE,
> + KSZ88X3_PORT3_RMII_CLK_INTERNAL,
> + dev->rmii_clk_internal);
> + }
It looks like this is the only use of dev->rmii_clk_internal? So does
it actually need to be a member of ksz_device?
Andrew
Powered by blists - more mailing lists