lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231019060651.23341-5-praveen.teja.kundanala@amd.com>
Date:   Thu, 19 Oct 2023 11:36:50 +0530
From:   Praveen Teja Kundanala <praveen.teja.kundanala@....com>
To:     <srinivas.kandagatla@...aro.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <michal.simek@....com>, <praveent@....com>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <linux-kernel@...r.kernel.org>
Subject: [PATCH V2 4/5] nvmem: zynqmp_nvmem: Add support to access efuse

Add support to read/write efuse memory map of ZynqMP
Below are the offsets of ZynqMP efuse memory map
	0 - SOC version(read only)
	0xC - 0xFC -ZynqMP specific purpose efuses
	0x100 - 0x17F - Physical Unclonable Function(PUF)
                efuses repurposed as user efuses

Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@....com>
---
 drivers/nvmem/zynqmp_nvmem.c | 218 ++++++++++++++++++++++++++++++-----
 1 file changed, 186 insertions(+), 32 deletions(-)

diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c
index 7f15aa89a9d0..a3bb8c3a831b 100644
--- a/drivers/nvmem/zynqmp_nvmem.c
+++ b/drivers/nvmem/zynqmp_nvmem.c
@@ -1,8 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2019 Xilinx, Inc.
+ * Copyright (C), 2022 - 2023 Advanced Micro Devices, Inc.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/nvmem-provider.h>
 #include <linux/of.h>
@@ -10,36 +12,190 @@
 #include <linux/firmware/xlnx-zynqmp.h>
 
 #define SILICON_REVISION_MASK 0xF
+#define P_USER_0_64_UPPER_MASK	GENMASK(31, 16)
+#define P_USER_127_LOWER_4_BIT_MASK GENMASK(3, 0)
+#define WORD_INBYTES		4
+#define SOC_VER_SIZE		0x4
+#define EFUSE_MEMORY_SIZE	0x177
+#define UNUSED_SPACE		0x8
+#define ZYNQMP_NVMEM_SIZE	(SOC_VER_SIZE + UNUSED_SPACE + \
+				 EFUSE_MEMORY_SIZE)
+#define SOC_VERSION_OFFSET	0x0
+#define EFUSE_START_OFFSET	0xC
+#define EFUSE_END_OFFSET	0xFC
+#define EFUSE_PUF_START_OFFSET	0x100
+#define EFUSE_PUF_MID_OFFSET	0x140
+#define EFUSE_PUF_END_OFFSET	0x17F
+#define EFUSE_NOT_ENABLED	29
 
-struct zynqmp_nvmem_data {
-	struct device *dev;
-	struct nvmem_device *nvmem;
+/*
+ * efuse access type
+ */
+enum efuse_access {
+	EFUSE_READ = 0,
+	EFUSE_WRITE
+};
+
+/**
+ * struct xilinx_efuse - the basic structure
+ * @src:	address of the buffer to store the data to be write/read
+ * @size:	read/write word count
+ * @offset:	read/write offset
+ * @flag:	0 - represents efuse read and 1- represents efuse write
+ * @pufuserfuse:0 - represents non-puf efuses, offset is used for read/write
+ *		1 - represents puf user fuse row number.
+ *
+ * this structure stores all the required details to
+ * read/write efuse memory.
+ */
+struct xilinx_efuse {
+	u64 src;
+	u32 size;
+	u32 offset;
+	enum efuse_access flag;
+	u32 pufuserfuse;
 };
 
-static int zynqmp_nvmem_read(void *context, unsigned int offset,
-			     void *val, size_t bytes)
+static int zynqmp_efuse_access(void *context, unsigned int offset,
+			       void *val, size_t bytes, enum efuse_access flag,
+			       unsigned int pufflag)
 {
+	struct device *dev = context;
+	struct xilinx_efuse *efuse;
+	dma_addr_t dma_addr;
+	dma_addr_t dma_buf;
+	size_t words = bytes / WORD_INBYTES;
 	int ret;
-	int idcode, version;
-	struct zynqmp_nvmem_data *priv = context;
-
-	ret = zynqmp_pm_get_chipid(&idcode, &version);
-	if (ret < 0)
-		return ret;
+	int value;
+	char *data;
+
+	if (bytes % WORD_INBYTES != 0) {
+		dev_err(dev, "Bytes requested should be word aligned\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (pufflag == 0 && offset % WORD_INBYTES) {
+		dev_err(dev, "Offset requested should be word aligned\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (pufflag == 1 && flag == EFUSE_WRITE) {
+		memcpy(&value, val, bytes);
+		if ((offset == EFUSE_PUF_START_OFFSET ||
+		     offset == EFUSE_PUF_MID_OFFSET) &&
+		    value & P_USER_0_64_UPPER_MASK) {
+			dev_err(dev, "Only lower 4 bytes are allowed to be programmed in P_USER_0 & P_USER_64\n");
+			return -EOPNOTSUPP;
+		}
+
+		if (offset == EFUSE_PUF_END_OFFSET &&
+		    (value & P_USER_127_LOWER_4_BIT_MASK)) {
+			dev_err(dev, "Only MSB 28 bits are allowed to be programmed for P_USER_127\n");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	efuse = dma_alloc_coherent(dev, sizeof(struct xilinx_efuse),
+				   &dma_addr, GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
 
-	dev_dbg(priv->dev, "Read chipid val %x %x\n", idcode, version);
-	*(int *)val = version & SILICON_REVISION_MASK;
+	data = dma_alloc_coherent(dev, sizeof(bytes),
+				  &dma_buf, GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto efuse_data_fail;
+	}
+
+	if (flag == EFUSE_WRITE) {
+		memcpy(data, val, bytes);
+		efuse->flag = EFUSE_WRITE;
+	} else {
+		efuse->flag = EFUSE_READ;
+	}
+
+	efuse->src = dma_buf;
+	efuse->size = words;
+	efuse->offset = offset;
+	efuse->pufuserfuse = pufflag;
+
+	zynqmp_pm_efuse_access(dma_addr, (u32 *)&ret);
+	if (ret != 0) {
+		if (ret == EFUSE_NOT_ENABLED) {
+			dev_err(dev, "efuse access is not enabled\n");
+			ret = -EOPNOTSUPP;
+		} else {
+			dev_err(dev, "Error in efuse read %x\n", ret);
+			ret = -EPERM;
+		}
+		goto efuse_access_err;
+	}
+
+	if (flag == EFUSE_READ)
+		memcpy(val, data, bytes);
+efuse_access_err:
+	dma_free_coherent(dev, sizeof(bytes),
+			  data, dma_buf);
+efuse_data_fail:
+	dma_free_coherent(dev, sizeof(struct xilinx_efuse),
+			  efuse, dma_addr);
+
+	return ret;
+}
 
-	return 0;
+static int zynqmp_nvmem_read(void *context, unsigned int offset, void *val, size_t bytes)
+{
+	struct device *dev = context;
+	int ret;
+	int pufflag = 0;
+	int idcode;
+	int version;
+
+	if (offset >= EFUSE_PUF_START_OFFSET && offset <= EFUSE_PUF_END_OFFSET)
+		pufflag = 1;
+
+	switch (offset) {
+	/* Soc version offset is zero */
+	case SOC_VERSION_OFFSET:
+		if (bytes != SOC_VER_SIZE)
+			return -EOPNOTSUPP;
+
+		ret = zynqmp_pm_get_chipid((u32 *)&idcode, (u32 *)&version);
+		if (ret < 0)
+			return ret;
+
+		dev_dbg(dev, "Read chipid val %x %x\n", idcode, version);
+		*(int *)val = version & SILICON_REVISION_MASK;
+		break;
+	/* Efuse offset starts from 0xc */
+	case EFUSE_START_OFFSET ... EFUSE_END_OFFSET:
+	case EFUSE_PUF_START_OFFSET ... EFUSE_PUF_END_OFFSET:
+		ret = zynqmp_efuse_access(context, offset, val,
+					  bytes, EFUSE_READ, pufflag);
+		break;
+	default:
+		*(u32 *)val = 0xDEADBEEF;
+		ret = 0;
+		break;
+	}
+
+	return ret;
 }
 
-static struct nvmem_config econfig = {
-	.name = "zynqmp-nvmem",
-	.owner = THIS_MODULE,
-	.word_size = 1,
-	.size = 1,
-	.read_only = true,
-};
+static int zynqmp_nvmem_write(void *context,
+			      unsigned int offset, void *val, size_t bytes)
+{
+	int pufflag = 0;
+
+	if (offset < EFUSE_START_OFFSET || offset > EFUSE_PUF_END_OFFSET)
+		return -EOPNOTSUPP;
+
+	if (offset >= EFUSE_PUF_START_OFFSET && offset <= EFUSE_PUF_END_OFFSET)
+		pufflag = 1;
+
+	return zynqmp_efuse_access(context, offset,
+				   val, bytes, EFUSE_WRITE, pufflag);
+}
 
 static const struct of_device_id zynqmp_nvmem_match[] = {
 	{ .compatible = "xlnx,zynqmp-nvmem-fw", },
@@ -50,21 +206,19 @@ MODULE_DEVICE_TABLE(of, zynqmp_nvmem_match);
 static int zynqmp_nvmem_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct zynqmp_nvmem_data *priv;
-
-	priv = devm_kzalloc(dev, sizeof(struct zynqmp_nvmem_data), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
+	struct nvmem_config econfig = {};
 
-	priv->dev = dev;
+	econfig.name = "zynqmp-nvmem";
+	econfig.owner = THIS_MODULE;
+	econfig.word_size = 1;
+	econfig.size = ZYNQMP_NVMEM_SIZE;
 	econfig.dev = dev;
 	econfig.add_legacy_fixed_of_cells = true;
+	econfig.priv = dev;
 	econfig.reg_read = zynqmp_nvmem_read;
-	econfig.priv = priv;
-
-	priv->nvmem = devm_nvmem_register(dev, &econfig);
+	econfig.reg_write = zynqmp_nvmem_write;
 
-	return PTR_ERR_OR_ZERO(priv->nvmem);
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &econfig));
 }
 
 static struct platform_driver zynqmp_nvmem_driver = {
@@ -77,6 +231,6 @@ static struct platform_driver zynqmp_nvmem_driver = {
 
 module_platform_driver(zynqmp_nvmem_driver);
 
-MODULE_AUTHOR("Michal Simek <michal.simek@....com>, Nava kishore Manne <nava.kishore.manne@....com>");
+MODULE_AUTHOR("Kalyani Akula <kalyani.akula@....com>, Praveen Teja Kundanala <praveen.teja.kundanala@....com>");
 MODULE_DESCRIPTION("ZynqMP NVMEM driver");
 MODULE_LICENSE("GPL");
-- 
2.36.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ