[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJF2gTQ_sa8pu9G1chP-ZbsCAba_a5yriuEu-0rKR==b24KUnQ@mail.gmail.com>
Date: Thu, 19 Oct 2023 16:37:02 +0800
From: Guo Ren <guoren@...nel.org>
To: Drew Fustini <dfustini@...libre.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Jisheng Zhang <jszhang@...nel.org>,
Adrian Hunter <adrian.hunter@...el.com>,
Fu Wei <wefu@...hat.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Conor Dooley <conor@...nel.org>,
Robert Nelson <robertcnelson@...gleboard.org>,
Jason Kridner <jkridner@...gleboard.org>,
Xi Ruoyao <xry111@...111.site>, Han Gao <gaohan@...as.ac.cn>,
Icenowy Zheng <uwu@...nowy.me>, linux-mmc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v2 4/7] riscv: defconfig: Enable mmc and dma drivers for
T-Head TH1520
On Wed, Oct 18, 2023 at 4:45 AM Drew Fustini <dfustini@...libre.com> wrote:
>
> Enable the mmc controller driver and dma controller driver needed for
> T-Head TH1520 based boards, like the LicheePi 4A and BeagleV-Ahead, to
> boot from eMMC storage.
Yes, it's necessary to add this config for th1520.
Reviewed-by: Guo Ren <guoren@...nel.org>
>
> Signed-off-by: Drew Fustini <dfustini@...libre.com>
> ---
> arch/riscv/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> index ab86ec3b9eab..c5a8583236d0 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -168,12 +168,14 @@ CONFIG_MMC=y
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_PLTFM=y
> CONFIG_MMC_SDHCI_CADENCE=y
> +CONFIG_MMC_SDHCI_OF_DWCMSHC=y
> CONFIG_MMC_SPI=y
> CONFIG_MMC_SUNXI=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_DRV_SUN6I=y
> CONFIG_DMADEVICES=y
> CONFIG_DMA_SUN6I=m
> +CONFIG_DW_AXI_DMAC=y
> CONFIG_VIRTIO_PCI=y
> CONFIG_VIRTIO_BALLOON=y
> CONFIG_VIRTIO_INPUT=y
>
> --
> 2.34.1
>
--
Best Regards
Guo Ren
Powered by blists - more mailing lists