| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 19 Oct 2023 20:34:00 +0900
From: 최찬우/Tizen Platform Lab(SR)/삼성전자
<cw00.choi@...sung.com>
To: "'Sascha Hauer'" <s.hauer@...gutronix.de>,
<linux-rockchip@...ts.infradead.org>
Cc: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>,
"'Heiko Stuebner'" <heiko@...ech.de>,
"'Chanwoo Choi'" <chanwoo@...nel.org>,
"'Kyungmin Park'" <kyungmin.park@...sung.com>,
"'MyungJoo Ham'" <myungjoo.ham@...sung.com>,
"'Will Deacon'" <will@...nel.org>,
"'Mark Rutland'" <mark.rutland@....com>, <kernel@...gutronix.de>,
"'Michael Riesch'" <michael.riesch@...fvision.net>,
"'Robin Murphy'" <robin.murphy@....com>,
"'Vincent Legoll'" <vincent.legoll@...il.com>,
"'Rob Herring'" <robh+dt@...nel.org>,
"'Krzysztof Kozlowski'" <krzysztof.kozlowski+dt@...aro.org>,
"'Conor Dooley'" <conor+dt@...nel.org>,
<devicetree@...r.kernel.org>,
"'Sebastian Reichel'" <sebastian.reichel@...labora.com>
Subject: RE: [PATCH v8 06/26] PM / devfreq: rockchip-dfi: Use free running
counter
> -----Original Message-----
> From: Sascha Hauer <s.hauer@...gutronix.de>
> Sent: Wednesday, October 18, 2023 3:17 PM
> To: linux-rockchip@...ts.infradead.org
> Cc: linux-arm-kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> linux-pm@...r.kernel.org; Heiko Stuebner <heiko@...ech.de>; Chanwoo Choi
> <chanwoo@...nel.org>; Kyungmin Park <kyungmin.park@...sung.com>; MyungJoo
> Ham <myungjoo.ham@...sung.com>; Will Deacon <will@...nel.org>; Mark
> Rutland <mark.rutland@....com>; kernel@...gutronix.de; Michael Riesch
> <michael.riesch@...fvision.net>; Robin Murphy <robin.murphy@....com>;
> Vincent Legoll <vincent.legoll@...il.com>; Rob Herring
> <robh+dt@...nel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@...aro.org>; Conor Dooley <conor+dt@...nel.org>;
> devicetree@...r.kernel.org; Sebastian Reichel
> <sebastian.reichel@...labora.com>; Sascha Hauer <s.hauer@...gutronix.de>;
> Chanwoo Choi <cw00.choi@...sung.com>
> Subject: [PATCH v8 06/26] PM / devfreq: rockchip-dfi: Use free running
> counter
>
> The DDR_MON counters are free running counters. These are resetted to 0
> when starting them over like currently done when reading the current
> counter values.
>
> Resetting the counters becomes a problem with perf support we want to add
> later, because perf needs counters that are not modified elsewhere.
>
> This patch removes resetting the counters and keeps them running instead.
> That means we no longer use the absolute counter values but instead
> compare them with the counter values we read last time. Not stopping the
> counters also has the impact that they are running while we are reading
> them. We cannot read multiple timers atomically, so the values do not
> exactly fit together. The effect should be negligible though as the time
> between two measurements is some orders of magnitude bigger than the time
> we need to read multiple registers.
>
> Reviewed-by: Sebastian Reichel <sebastian.reichel@...labora.com>
> Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
> Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
> ---
>
> Notes:
> Changes since v4:
> - rephrase commit message
> - Drop unused variable
>
> drivers/devfreq/event/rockchip-dfi.c | 52 ++++++++++++++++------------
> 1 file changed, 30 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/devfreq/event/rockchip-dfi.c
> b/drivers/devfreq/event/rockchip-dfi.c
> index 680f629da64fc..126bb744645b6 100644
> --- a/drivers/devfreq/event/rockchip-dfi.c
> +++ b/drivers/devfreq/event/rockchip-dfi.c
> @@ -38,11 +38,15 @@
> #define DDRMON_CH1_COUNT_NUM 0x3c
> #define DDRMON_CH1_DFI_ACCESS_NUM 0x40
>
> -struct dmc_usage {
> +struct dmc_count_channel {
> u32 access;
> u32 total;
> };
>
> +struct dmc_count {
> + struct dmc_count_channel c[RK3399_DMC_NUM_CH]; };
> +
> /*
> * The dfi controller can monitor DDR load. It has an upper and lower
> threshold
> * for the operating points. Whenever the usage leaves these bounds an
> event is @@ -51,7 +55,7 @@ struct dmc_usage { struct rockchip_dfi {
> struct devfreq_event_dev *edev;
> struct devfreq_event_desc desc;
> - struct dmc_usage ch_usage[RK3399_DMC_NUM_CH];
> + struct dmc_count last_event_count;
> struct device *dev;
> void __iomem *regs;
> struct regmap *regmap_pmu;
> @@ -85,30 +89,18 @@ static void rockchip_dfi_stop_hardware_counter(struct
> devfreq_event_dev *edev)
> writel_relaxed(SOFTWARE_DIS, dfi_regs + DDRMON_CTRL); }
>
> -static int rockchip_dfi_get_busier_ch(struct devfreq_event_dev *edev)
> +static void rockchip_dfi_read_counters(struct devfreq_event_dev *edev,
> +struct dmc_count *count)
> {
> struct rockchip_dfi *dfi = devfreq_event_get_drvdata(edev);
> - u32 tmp, max = 0;
> - u32 i, busier_ch = 0;
> + u32 i;
> void __iomem *dfi_regs = dfi->regs;
>
> - rockchip_dfi_stop_hardware_counter(edev);
> -
> - /* Find out which channel is busier */
> for (i = 0; i < RK3399_DMC_NUM_CH; i++) {
> - dfi->ch_usage[i].access = readl_relaxed(dfi_regs +
> + count->c[i].access = readl_relaxed(dfi_regs +
> DDRMON_CH0_DFI_ACCESS_NUM + i * 20);
> - dfi->ch_usage[i].total = readl_relaxed(dfi_regs +
> + count->c[i].total = readl_relaxed(dfi_regs +
> DDRMON_CH0_COUNT_NUM + i * 20);
> - tmp = dfi->ch_usage[i].access;
> - if (tmp > max) {
> - busier_ch = i;
> - max = tmp;
> - }
> }
> - rockchip_dfi_start_hardware_counter(edev);
> -
> - return busier_ch;
> }
>
> static int rockchip_dfi_disable(struct devfreq_event_dev *edev) @@ -
> 145,12 +137,28 @@ static int rockchip_dfi_get_event(struct
> devfreq_event_dev *edev,
> struct devfreq_event_data *edata) {
> struct rockchip_dfi *dfi = devfreq_event_get_drvdata(edev);
> - int busier_ch;
> + struct dmc_count count;
> + struct dmc_count *last = &dfi->last_event_count;
> + u32 access = 0, total = 0;
> + int i;
> +
> + rockchip_dfi_read_counters(edev, &count);
> +
> + /* We can only report one channel, so find the busiest one */
> + for (i = 0; i < RK3399_DMC_NUM_CH; i++) {
> + u32 a = count.c[i].access - last->c[i].access;
> + u32 t = count.c[i].total - last->c[i].total;
> +
> + if (a > access) {
> + access = a;
> + total = t;
> + }
> + }
>
> - busier_ch = rockchip_dfi_get_busier_ch(edev);
> + edata->load_count = access * 4;
> + edata->total_count = total;
>
> - edata->load_count = dfi->ch_usage[busier_ch].access * 4;
> - edata->total_count = dfi->ch_usage[busier_ch].total;
> + dfi->last_event_count = count;
>
> return 0;
> }
> --
> 2.39.2
Applied it. Thanks.
Best Regards,
Chanwoo Choi
Powered by blists - more mailing lists