lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <27917c82b6e2c9541e185e49c8b403ba65b31ef9.camel@mediatek.com>
Date:   Fri, 20 Oct 2023 08:37:30 +0000
From:   Jason-ch Chen (陳建豪) 
        <Jason-ch.Chen@...iatek.com>
To:     "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "eugen.hristev@...labora.com" <eugen.hristev@...labora.com>,
        "brgl@...ev.pl" <brgl@...ev.pl>,
        "conor+dt@...nel.org" <conor+dt@...nel.org>,
        "amergnat@...libre.com" <amergnat@...libre.com>,
        "krzysztof.kozlowski+dt@...aro.org" 
        <krzysztof.kozlowski+dt@...aro.org>,
        "matthias.bgg@...il.com" <matthias.bgg@...il.com>,
        "angelogioacchino.delregno@...labora.com" 
        <angelogioacchino.delregno@...labora.com>
CC:     "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "wenst@...omium.org" <wenst@...omium.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "nfraprado@...labora.com" <nfraprado@...labora.com>,
        "linux-mediatek@...ts.infradead.org" 
        <linux-mediatek@...ts.infradead.org>,
        Project_Global_Chrome_Upstream_Group 
        <Project_Global_Chrome_Upstream_Group@...iatek.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: Re: [PATCH v5 4/4] arm64: dts: Add MediaTek MT8188 dts and evaluation
 board and Makefile

Hi Angelo,

On Thu, 2023-10-19 at 11:47 +0200, AngeloGioacchino Del Regno wrote:
> Il 19/10/23 09:54, Jason-ch Chen ha scritto:
> > From: jason-ch chen <Jason-ch.Chen@...iatek.com>
> > 
> > MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6
> > CA55
> > and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
> > 
> > We add basic chip support for MediaTek MT8188 on evaluation board.
> > 
> > Signed-off-by: jason-ch chen <Jason-ch.Chen@...iatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/Makefile       |   1 +
> >   arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 388 ++++++++
> >   arch/arm64/boot/dts/mediatek/mt8188.dtsi    | 949
> > ++++++++++++++++++++
> >   3 files changed, 1338 insertions(+)
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> > b/arch/arm64/boot/dts/mediatek/Makefile
> > index e6e7592a3645..8900b939ed52 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-
> > krane-sku0.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > new file mode 100644
> > index 000000000000..773bf84cfb94
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > @@ -0,0 +1,388 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright (C) 2023 MediaTek Inc.
> > + */
> > +/dts-v1/;
> > +#include "mt8188.dtsi"
> > +#include "mt6359.dtsi"
> > +
> > +/ {
> > +	model = "MediaTek MT8188 evaluation board";
> > +	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +		i2c0 = &i2c0;
> > +		i2c1 = &i2c1;
> > +		i2c2 = &i2c2;
> > +		i2c3 = &i2c3;
> > +		i2c4 = &i2c4;
> > +		i2c5 = &i2c5;
> > +		i2c6 = &i2c6;
> > +		mmc0 = &mmc0;
> > +	};
> > +
> > +	chosen: chosen {
> > +		stdout-path = "serial0:115200n8";
> > +	};
> > +
> > +	memory@...00000 {
> > +		device_type = "memory";
> > +		reg = <0 0x40000000 0 0x80000000>;
> > +	};
> > +
> > +	reserved_memory: reserved-memory {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		ranges;
> > +
> > +		scp_mem_reserved: memory@...00000 {
> > +			compatible = "shared-dma-pool";
> > +			reg = <0 0x50000000 0 0x2900000>;
> > +			no-map;
> > +		};
> > +	};
> > +};
> > +
> > +&auxadc {
> > +	status = "okay";
> > +};
> > +
> > +&i2c0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&i2c0_pins>;
> > +	clock-frequency = <400000>;
> > +	status = "okay";
> > +};
> > +
> > +&i2c1 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&i2c1_pins>;
> > +	clock-frequency = <400000>;
> > +	status = "okay";
> > +};
> > +
> > +&i2c2 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&i2c2_pins>;
> > +	clock-frequency = <400000>;
> > +	status = "okay";
> > +};
> > +
> > +&i2c3 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&i2c3_pins>;
> > +	clock-frequency = <400000>;
> > +	status = "okay";
> > +};
> > +
> > +&i2c4 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&i2c4_pins>;
> > +	clock-frequency = <400000>;
> > +	status = "okay";
> > +};
> > +
> > +&i2c5 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&i2c5_pins>;
> > +	clock-frequency = <400000>;
> > +	status = "okay";
> > +};
> > +
> > +&i2c6 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&i2c6_pins>;
> > +	clock-frequency = <400000>;
> > +	status = "okay";
> > +};
> > +
> > +&mmc0 {
> > +	status = "okay";
> > +	pinctrl-names = "default", "state_uhs";
> > +	pinctrl-0 = <&mmc0_default_pins>;
> > +	pinctrl-1 = <&mmc0_uhs_pins>;
> > +	bus-width = <8>;
> > +	max-frequency = <200000000>;
> 
> ...that's how it should be ordered:
> 
> &mmc0 {
> 	bus-width = <8>;
> 	hs400-ds-delay = <0x1481b>;
> 	max-frequency = <200000000>;
> 
> 	cap-mmc-highspeed;
> 	cap-mmc-hw-reset;
> 	mmc-hs200-1_8v;
> 	mmc-hs400-1_8v;
> 	no-sdio;
> 	no-sd;
> 	non-removable;
> 
> 	vmmc-supply = ...
> 	vqmmc-supply = ...
> 
> 	pinctrl-0 ...
> 	pinctrl-1 ...
> 	pinctrl-names ...
> 
> 	status = "okay";
> };
> 
> > +	cap-mmc-highspeed;
> > +	mmc-hs200-1_8v;
> > +	mmc-hs400-1_8v;
> > +	supports-cqe;
> > +	cap-mmc-hw-reset;
> > +	no-sdio;
> > +	no-sd;
> > +	hs400-ds-delay = <0x1481b>;
> > +	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
> > +	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
> > +	non-removable;
> > +};
> > +
> > +&mt6359_vcore_buck_reg {
> > +	regulator-always-on;
> > +};
> > +
> > +&mt6359_vgpu11_buck_reg {
> > +	regulator-always-on;
> > +};
> > +
> > +&mt6359_vpu_buck_reg {
> > +	regulator-always-on;
> > +};
> > +
> > +&mt6359_vrf12_ldo_reg {
> > +	regulator-always-on;
> > +};
> > +
> > +&nor_flash {
> > +	status = "okay";
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&nor_pins_default>;
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +
> > +	flash@0 {
> > +		compatible = "jedec,spi-nor";
> > +		reg = <0>;
> > +		spi-max-frequency = <52000000>;
> > +	};
> > +};
> > +
> > +&pio {
> > +	adsp_uart_pins: adsp-uart-pins {
> > +		pins-adsp-uart {
> 
> pins-tx-rx {
> 
> > +			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
> > +				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
> > +		};
> > +	};
> > +
> 
> ..snip..
> 
> > +
> > +	mmc0_uhs_pins: mmc0-uhs-pins {
> > +		pins-cmd-dat {
> > +			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
> > +				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
> > +				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
> > +				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
> > +				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
> > +				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
> > +				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
> > +				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
> > +				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
> > +			input-enable;
> > +			drive-strength = <8>;
> > +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> > +		};
> > +
> > +		pins-clk {
> 
> pins-clk-ds {
> 	pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
> 		 <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
> 	drive-strength = <8>;
> 	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> };
> 
> ...that's shorter: both pins are anyway sharing the same drive
> strength and bias.
> 
> > +			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
> > +			drive-strength = <8>;
> > +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> > +		};
> > +
> > +		pins-ds {
> > +			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
> > +			drive-strength = <8>;
> > +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> > +		};
> > +
> > +		pins-rst {
> > +			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
> > +			drive-strength = <8>;
> > +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> > +		};
> > +	};
> > +
> > +	nor_pins_default: nor-pins {
> > +		pins0 {
> 
> pins-io-ck {
> 
> > +			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
> > +				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
> > +				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
> > +			bias-pull-down;
> > +		};
> > +
> > +		pins1 {
> 
> pins-io-cs {
> 
> > +			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
> > +				 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
> > +				 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
> > +			bias-pull-up;
> > +		};
> > +	};
> > +
> > +	spi0_pins: spi0-pins {
> > +		pins-spi {
> > +			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
> > +				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
> > +				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
> > +				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
> > +			bias-disable;
> > +		};
> > +	};
> > +
> > +	spi1_pins: spi1-pins {
> > +		pins-spi {
> > +			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
> > +				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
> > +				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
> > +				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
> > +			bias-disable;
> > +		};
> > +	};
> > +
> > +	spi2_pins: spi2-pins {
> > +		pins-spi {
> > +			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
> > +				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
> > +				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
> > +				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
> > +			bias-disable;
> > +		};
> > +	};
> > +
> > +	uart0_pins: uart0-pins {
> > +		pins-uart0 {
> 
> pins-rx-tx {
> 
> > +			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
> > +				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
> > +			bias-pull-up;
> > +		};
> > +	};
> > +};
> > +
> 
> ..snip..
> 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > new file mode 100644
> > index 000000000000..c5af32fb7e85
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > @@ -0,0 +1,949 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2023 MediaTek Inc.
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/clock/mediatek,mt8188-clk.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/phy/phy.h>
> > +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
> > +#include <dt-bindings/power/mediatek,mt8188-power.h>
> > +
> > +/ {
> > +	compatible = "mediatek,mt8188";
> > +	interrupt-parent = <&gic>;
> > +	#address-cells = <2>;
> > +	#size-cells = <2>;
> > +
> > +	cpus {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		cpu0: cpu@0 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a55";
> > +			reg = <0x000>;
> > +			enable-method = "psci";
> > +			clock-frequency = <2000000000>;
> > +			capacity-dmips-mhz = <282>;
> > +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +			i-cache-size = <32768>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <128>;
> > +			d-cache-size = <32768>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&l2_0>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu1: cpu@100 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a55";
> > +			reg = <0x100>;
> > +			enable-method = "psci";
> > +			clock-frequency = <2000000000>;
> > +			capacity-dmips-mhz = <282>;
> > +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +			i-cache-size = <32768>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <128>;
> > +			d-cache-size = <32768>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&l2_0>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu2: cpu@200 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a55";
> > +			reg = <0x200>;
> > +			enable-method = "psci";
> > +			clock-frequency = <2000000000>;
> > +			capacity-dmips-mhz = <282>;
> > +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +			i-cache-size = <32768>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <128>;
> > +			d-cache-size = <32768>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&l2_0>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu3: cpu@300 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a55";
> > +			reg = <0x300>;
> > +			enable-method = "psci";
> > +			clock-frequency = <2000000000>;
> > +			capacity-dmips-mhz = <282>;
> > +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +			i-cache-size = <32768>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <128>;
> > +			d-cache-size = <32768>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&l2_0>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu4: cpu@400 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a55";
> > +			reg = <0x400>;
> > +			enable-method = "psci";
> > +			clock-frequency = <2000000000>;
> > +			capacity-dmips-mhz = <282>;
> > +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +			i-cache-size = <32768>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <128>;
> > +			d-cache-size = <32768>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&l2_0>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu5: cpu@500 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a55";
> > +			reg = <0x500>;
> > +			enable-method = "psci";
> > +			clock-frequency = <2000000000>;
> > +			capacity-dmips-mhz = <282>;
> > +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +			i-cache-size = <32768>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <128>;
> > +			d-cache-size = <32768>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&l2_0>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu6: cpu@600 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a78";
> > +			reg = <0x600>;
> > +			enable-method = "psci";
> > +			clock-frequency = <2600000000>;
> > +			capacity-dmips-mhz = <1024>;
> > +			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> > +			i-cache-size = <65536>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <65536>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <256>;
> > +			next-level-cache = <&l2_1>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu7: cpu@700 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a78";
> > +			reg = <0x700>;
> > +			enable-method = "psci";
> > +			clock-frequency = <2600000000>;
> > +			capacity-dmips-mhz = <1024>;
> > +			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> > +			i-cache-size = <65536>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <65536>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <256>;
> > +			next-level-cache = <&l2_1>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu-map {
> > +			cluster0 {
> > +				core0 {
> > +					cpu = <&cpu0>;
> > +				};
> > +
> > +				core1 {
> > +					cpu = <&cpu1>;
> > +				};
> > +
> > +				core2 {
> > +					cpu = <&cpu2>;
> > +				};
> > +
> > +				core3 {
> > +					cpu = <&cpu3>;
> > +				};
> > +
> > +				core4 {
> > +					cpu = <&cpu4>;
> > +				};
> > +
> > +				core5 {
> > +					cpu = <&cpu5>;
> > +				};
> > +
> > +				core6 {
> > +					cpu = <&cpu6>;
> > +				};
> > +
> > +				core7 {
> > +					cpu = <&cpu7>;
> > +				};
> > +			};
> > +		};
> > +
> > +		idle-states {
> > +			entry-method = "psci";
> > +
> > +			cpu_off_l: cpu-off-l {
> > +				compatible = "arm,idle-state";
> > +				arm,psci-suspend-param = <0x00010000>;
> > +				local-timer-stop;
> > +				entry-latency-us = <50>;
> > +				exit-latency-us = <95>;
> > +				min-residency-us = <580>;
> > +			};
> > +
> > +			cpu_off_b: cpu-off-b {
> > +				compatible = "arm,idle-state";
> > +				arm,psci-suspend-param = <0x00010000>;
> > +				local-timer-stop;
> > +				entry-latency-us = <45>;
> > +				exit-latency-us = <140>;
> > +				min-residency-us = <740>;
> > +			};
> > +
> > +			cluster_off_l: cluster-off-l {
> > +				compatible = "arm,idle-state";
> > +				arm,psci-suspend-param = <0x01010010>;
> > +				local-timer-stop;
> > +				entry-latency-us = <55>;
> > +				exit-latency-us = <155>;
> > +				min-residency-us = <840>;
> > +			};
> > +
> > +			cluster_off_b: cluster-off-b {
> > +				compatible = "arm,idle-state";
> > +				arm,psci-suspend-param = <0x01010010>;
> > +				local-timer-stop;
> > +				entry-latency-us = <50>;
> > +				exit-latency-us = <200>;
> > +				min-residency-us = <1000>;
> > +			};
> > +		};
> > +
> > +		l2_0: l2-cache0 {
> > +			compatible = "cache";
> > +			cache-level = <2>;
> 
> NACK. You're not specifying the L2 cache correctly.
> 
> Hint: the missing properties are
> cache-size
> cache-line-size
> cache-sets
> 
> > +			next-level-cache = <&l3_0>;
> > +			cache-unified;
> > +		};
> > +
> > +		l2_1: l2-cache1 {
> > +			compatible = "cache";
> > +			cache-level = <2>;
> 
> Same here. Please properly define the L2 cache.
> 
> > +			next-level-cache = <&l3_0>;
> > +			cache-unified;
> > +		};
> > +
> > +		l3_0: l3-cache {
> > +			compatible = "cache";
> 
> And again.
> 
> This SoC has 256KB L2 shared between the two A78 cores, 128KB L2
> shared
> between the A55 cores, and 2MB of L3 cache shared across all.
> 
> > +			cache-level = <3>;
> > +			cache-unified;
> > +		};
> > +	};
> > +
> > +	clk13m: oscillator-13m {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <13000000>;
> > +		clock-output-names = "clk13m";
> > +	};
> > +
> > +	clk26m: oscillator-26m {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <26000000>;
> > +		clock-output-names = "clk26m";
> > +	};
> > +
> > +	clk32k: oscillator-32k {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <32768>;
> > +		clock-output-names = "clk32k";
> > +	};
> > +
> > +	pmu-a55 {
> > +		compatible = "arm,cortex-a55-pmu";
> > +		interrupt-parent = <&gic>;
> > +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH
> > &ppi_cluster0>;
> > +	};
> > +
> > +	pmu-a78 {
> > +		compatible = "arm,cortex-a78-pmu";
> > +		interrupt-parent = <&gic>;
> > +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH
> > &ppi_cluster1>;
> > +	};
> 
> Question: Is the ARM DSU PMU broken also on this SoC's TZ firmware?!

Because of security concerns, the default configuration of the ARM
trusted firmware does not include enabling the ARM DSU PMU.

However, it is possible to add a patch to enable this feature. The
patch https://crrev.com/c/4885752 has not been merged into TF-A yet.
We are currently considering upstreaming it.

In the next version, I will rectify the issues mentioned in the other
comments. Thank you for your review.

> > +
> > +	psci {
> > +		compatible = "arm,psci-1.0";
> > +		method = "smc";
> > +	};
> > +
> > +	timer: timer {
> > +		compatible = "arm,armv8-timer";
> > +		interrupt-parent = <&gic>;
> > +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
> > +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
> > +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
> > +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
> > +		clock-frequency = <13000000>;
> > +	};
> > +
> > +	soc {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		compatible = "simple-bus";
> > +		ranges;
> > +
> > +		gic: interrupt-controller@...0000 {
> > +			compatible = "arm,gic-v3";
> > +			#interrupt-cells = <4>;
> > +			#redistributor-regions = <1>;
> > +			interrupt-parent = <&gic>;
> > +			interrupt-controller;
> > +			reg = <0 0x0c000000 0 0x40000>,
> > +			      <0 0x0c040000 0 0x200000>;
> > +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> > +
> > +			ppi-partitions {
> > +				ppi_cluster0: interrupt-partition-0 {
> > +					affinity = <&cpu0 &cpu1 &cpu2
> > &cpu3 &cpu4 &cpu5>;
> > +				};
> > +
> > +				ppi_cluster1: interrupt-partition-1 {
> > +					affinity = <&cpu6 &cpu7>;
> > +				};
> > +			};
> > +		};
> > +
> > +		topckgen: syscon@...00000 {
> > +			compatible = "mediatek,mt8188-topckgen",
> > "syscon";
> > +			reg = <0 0x10000000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		infracfg_ao: syscon@...01000 {
> > +			compatible = "mediatek,mt8188-infracfg-ao",
> > "syscon";
> > +			reg = <0 0x10001000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		pericfg: syscon@...03000 {
> > +			compatible = "mediatek,mt8188-pericfg",
> > "syscon";
> > +			reg = <0 0x10003000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		pio: pinctrl@...05000 {
> > +			compatible = "mediatek,mt8188-pinctrl";
> > +			reg = <0 0x10005000 0 0x1000>,
> > +			      <0 0x11c00000 0 0x1000>,
> > +			      <0 0x11e10000 0 0x1000>,
> > +			      <0 0x11e20000 0 0x1000>,
> > +			      <0 0x11ea0000 0 0x1000>,
> > +			      <0 0x1000b000 0 0x1000>;
> > +			reg-names = "iocfg0", "iocfg_rm",
> > +				    "iocfg_lt", "iocfg_lm", "iocfg_rt",
> > +				    "eint";
> 
> 			reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
> 				    "iocfg_lm", "iocfg_rt", "eint";
> 
> one less line :-)
> 
> > +			gpio-controller;
> > +			#gpio-cells = <2>;
> > +			gpio-ranges = <&pio 0 0 176>;
> > +			interrupt-controller;
> > +			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > +			#interrupt-cells = <2>;
> > +		};
> > +
> > +		watchdog: watchdog@...07000 {
> > +			compatible = "mediatek,mt8188-wdt";
> > +			mediatek,disable-extrst;
> > +			reg = <0 0x10007000 0 0x100>;
> 
> mediatek,disable-extrst goes here.
> 
> > +			#reset-cells = <1>;
> > +		};
> > +
> > +		apmixedsys: syscon@...0c000 {
> > +			compatible = "mediatek,mt8188-apmixedsys",
> > "syscon";
> > +			reg = <0 0x1000c000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		systimer: timer@...17000 {
> > +			compatible = "mediatek,mt8188-timer",
> > "mediatek,mt6765-timer";
> > +			reg = <0 0x10017000 0 0x1000>;
> > +			reg-names = "sys_timer_base";
> 
> You don't need reg-names here but anyway, if you really want to keep
> that, please
> no underscores when possible.
> 
> > +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > +			clocks = <&clk13m>;
> > +		};
> > +
> 
> Regards,
> Angelo

Regards,
Jason

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ