lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231020130219.1255937-1-thomas.perrot@bootlin.com>
Date:   Fri, 20 Oct 2023 15:02:19 +0200
From:   thomas.perrot@...tlin.com
To:     Russell King <linux@...linux.org.uk>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Claudiu Beznea <claudiu.beznea@...on.dev>
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        clement.leger@...tlin.com,
        Thomas Perrot <thomas.perrot@...tlin.com>
Subject: [PATCH] ARM: at91: pm: set soc_pm.data.mode in at91_pm_secure_init()

From: Thomas Perrot <thomas.perrot@...tlin.com>

In non secure mode, soc_pm.data.mode is set when entering pm in
at91_pm_begin(). This value is used (not only) to determine if the system
is going into slow clock mode (at91_suspend_entering_slow_clock()). This
function is called from various drivers to check this and act accordingly.
If not set, the driver might enter an incorrect suspend mode. When using
secure suspend mode, at91_pm_begin() is not called and thus
soc_pm.data.mode is not set. Since when using secure suspend, only one
suspend mode is supported, set this value directly in
at91_pm_secure_init().

Signed-off-by: Clément Léger <clement.leger@...tlin.com>
Signed-off-by: Thomas Perrot <thomas.perrot@...tlin.com>
---
 arch/arm/mach-at91/pm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1a26af0fabc7..345b91dc6627 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -1103,6 +1103,7 @@ static void __init at91_pm_secure_init(void)
 	if (res.a0 == 0) {
 		pr_info("AT91: Secure PM: suspend mode set to %s\n",
 			pm_modes[suspend_mode].pattern);
+		soc_pm.data.mode = suspend_mode;
 		return;
 	}
 
@@ -1112,6 +1113,7 @@ static void __init at91_pm_secure_init(void)
 	res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
 	if (res.a0 == 0) {
 		pr_warn("AT91: Secure PM: failed to get default mode\n");
+		soc_pm.data.mode = -1;
 		return;
 	}
 
@@ -1119,6 +1121,7 @@ static void __init at91_pm_secure_init(void)
 		pm_modes[suspend_mode].pattern);
 
 	soc_pm.data.suspend_mode = res.a1;
+	soc_pm.data.mode = soc_pm.data.suspend_mode;
 }
 static const struct of_device_id atmel_shdwc_ids[] = {
 	{ .compatible = "atmel,sama5d2-shdwc" },
-- 
2.41.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ