[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231020153022.57858-2-andrejs.cainikovs@gmail.com>
Date: Fri, 20 Oct 2023 17:30:21 +0200
From: Andrejs Cainikovs <andrejs.cainikovs@...il.com>
To: Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Andrejs Cainikovs <andrejs.cainikovs@...adex.com>
Subject: [PATCH v1 1/2] arm64: dts: imx8-apalis: add can power-up delay on ixora board
From: Andrejs Cainikovs <andrejs.cainikovs@...adex.com>
Newer variants of Ixora boards require a power-up delay when powering up
the CAN transceiver of up to 1ms.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@...adex.com>
---
arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
index 72136c436a70..f6654fdcb147 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -68,6 +68,7 @@ reg_can1_supply: regulator-can1-supply {
gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "can1_supply";
+ startup-delay-us = <1000>;
};
reg_can2_supply: regulator-can2-supply {
@@ -77,6 +78,7 @@ reg_can2_supply: regulator-can2-supply {
gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "can2_supply";
+ startup-delay-us = <1000>;
};
reg_usb_host_vbus: regulator-usb-host-vbus {
--
2.34.1
Powered by blists - more mailing lists