linux-kernel - [PATCH net v2 1/1] net: stmmac: update MAC capabilities when tx queues are updated

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231020032535.1777746-1-yi.fang.gan@intel.com>
Date:   Fri, 20 Oct 2023 11:25:35 +0800
From:   Gan Yi Fang <yi.fang.gan@...el.com>
To:     Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Ong Boon Leong <boon.leong.ong@...el.com>,
        netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:     Looi Hong Aun <hong.aun.looi@...el.com>,
        Voon Weifeng <weifeng.voon@...el.com>,
        Song Yoong Siang <yoong.siang.song@...el.com>,
        Gan Yi Fang <yi.fang.gan@...el.com>
Subject: [PATCH net v2 1/1] net: stmmac: update MAC capabilities when tx queues are updated

From: Michael Sit Wei Hong <michael.wei.hong.sit@...el.com>

Upon boot up, the driver will configure the MAC capabilities based on
the maximum number of tx and rx queues. When the user changes the
tx queues to single queue, the MAC should be capable of supporting Half
Duplex, but the driver does not update the MAC capabilities when it is
configured so.

Using the stmmac_reinit_queues() to check the number of tx queues
and set the MAC capabilities accordingly.

Fixes: 0366f7e06a6b ("net: stmmac: add ethtool support for get/set channels")
Cc: <stable@...r.kernel.org> # 5.17+
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@...el.com>
Signed-off-by: Gan, Yi Fang <yi.fang.gan@...el.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c   | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ed1a5a31a491..5801f4d50f95 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1197,6 +1197,17 @@ static int stmmac_init_phy(struct net_device *dev)
 	return ret;
 }
 
+static void stmmac_set_half_duplex(struct stmmac_priv *priv)
+{
+	/* Half-Duplex can only work with single tx queue */
+	if (priv->plat->tx_queues_to_use > 1)
+		priv->phylink_config.mac_capabilities &=
+			~(MAC_10HD | MAC_100HD | MAC_1000HD);
+	else
+		priv->phylink_config.mac_capabilities |=
+			(MAC_10HD | MAC_100HD | MAC_1000HD);
+}
+
 static int stmmac_phy_setup(struct stmmac_priv *priv)
 {
 	struct stmmac_mdio_bus_data *mdio_bus_data;
@@ -1228,10 +1239,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 						MAC_10FD | MAC_100FD |
 						MAC_1000FD;
 
-	/* Half-Duplex can only work with single queue */
-	if (priv->plat->tx_queues_to_use <= 1)
-		priv->phylink_config.mac_capabilities |= MAC_10HD | MAC_100HD |
-							 MAC_1000HD;
+	stmmac_set_half_duplex(priv);
 
 	/* Get the MAC specific capabilities */
 	stmmac_mac_phylink_get_caps(priv);
@@ -7172,6 +7180,7 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
 									rx_cnt);
 
+	stmmac_set_half_duplex(priv);
 	stmmac_napi_add(dev);
 
 	if (netif_running(dev))
-- 
2.34.1