| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com>
Date: Fri, 20 Oct 2023 17:03:17 +0100
From: Cameron Williams <cang1@...e.co.uk>
To: gregkh@...uxfoundation.org, jirislaby@...nel.org,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Cc: Cameron Williams <cang1@...e.co.uk>, stable@...r.kernel.org
Subject: [PATCH v4 11/11] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.
Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.
Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@...r.kernel.org
Signed-off-by: Cameron Williams <cang1@...e.co.uk>
---
For stable: This patch is only applicable to 5.15 LTS and up, other LTS
kernels dont have the quirks available that this patch uses nor do they
support the cards these quirks target.
v3 - v4:
Add Fixes: and Cc: tag.
v2 - v3:
Re-submit patch series using git send-email to make threading work.
v1 - v2:
This is a resubmission series for the patch series below. That series
was lots of changes sent to lots of maintainers, this series is just for
the tty/serial/8250 subsystem.
[1] https://lore.kernel.org/all/DU0PR02MB789950E64D808DB57E9D7312C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[2] https://lore.kernel.org/all/DU0PR02MB7899DE53DFC900EFB50E53F2C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[3] https://lore.kernel.org/all/DU0PR02MB7899033E7E81EAF3694BC20AC4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[4] https://lore.kernel.org/all/DU0PR02MB7899EABA8C3DCAC94DCC79D4C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
drivers/tty/serial/8250/8250_pci.c | 147 +++++++++++++++++++++++++++++
1 file changed, 147 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index af970b372cc2..5b024df54844 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2429,6 +2429,153 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.init = pci_oxsemi_tornado_init,
.setup = pci_oxsemi_tornado_setup,
},
+ /*
+ * Brainboxes devices - all Oxsemi based
+ */
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4027,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4028,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4029,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4019,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4016,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4015,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400A,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400E,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400C,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400B,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400F,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4010,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4011,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x401D,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x401E,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4013,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4017,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4018,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
--
2.42.0
Powered by blists - more mailing lists