lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAF4BwTVQf25uCCVovtce+kjz0pFFMZX=Ln36R4Vd-1LEsxrcMw@mail.gmail.com>
Date:   Sat, 21 Oct 2023 10:40:41 -0400
From:   Daniel Berlin <dberlin@...rlin.org>
To:     Arend van Spriel <aspriel@...il.com>,
        Franky Lin <franky.lin@...adcom.com>,
        Hante Meuleman <hante.meuleman@...adcom.com>
Cc:     linux-wireless@...r.kernel.org,
        brcm80211-dev-list.pdl@...adcom.com,
        SHA-cyfmac-dev-list@...ineon.com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/1] [brcmfmac] Fix regulatory domain handling to reset
 bands properly

As an aside, the alternative would be to simply not ignore any
attempts to set the regulatory domain, regardless of whether it's 00
or the chip is already set to that country.
It doesn't happen that often, so it's not clear it's worth avoiding it at all.
There are some things i'd have to fix to make it work resiliently well
(for example, i know we set the 2g bw cap where we do because it has
to be done with the interface down), but i can fix those if needed.

On Thu, Oct 19, 2023 at 10:18 AM Daniel Berlin <dberlin@...rlin.org> wrote:
>
> Currently, we ignore the default country in the reg notifier.
> We also register a custom regulatory domain, which is set
> as the default.
> As a result, the chip is likely to be set to the correct country,
> but the regulatory domain will not match it.
>
> When the regulatory notifier is then called, we see the countries
> are the same and do not change anything, even though the domain
> is wrong.
>
> This patch forces us to reset the bands on the first country change
> even if the chip is already set to that country.
>
> We also restore the original band info before reconstructing channel
> info, as the new regdom power limits may be higher than what is
> currently set.
>
> Signed-off-by: Daniel Berlin <dberlin@...rlin.org>
> ---
>  .../broadcom/brcm80211/brcmfmac/cfg80211.c    | 38 +++++++++++++++----
>  .../broadcom/brcm80211/brcmfmac/cfg80211.h    |  2 +
>  2 files changed, 33 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> index 3656790ec4c9..7bc479ccc24b 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> @@ -7199,11 +7199,23 @@ static int brcmf_construct_chaninfo(struct brcmf_cfg80211_info *cfg,
>                 goto fail_pbuf;
>         }
>
> +       /* Changing regulatory domain may change channels and limits
> +        * To ensure that we correctly set the new band info, copy the original
> +        * info first.
> +        */
>         band = wiphy->bands[NL80211_BAND_2GHZ];
> -       if (band)
> +       if (band) {
> +               memcpy(band->channels, &__wl_2ghz_channels,
> +                      sizeof(__wl_2ghz_channels));
> +               band->n_channels = ARRAY_SIZE(__wl_2ghz_channels);
>                 for (i = 0; i < band->n_channels; i++)
>                         band->channels[i].flags = IEEE80211_CHAN_DISABLED;
> +       }
>         band = wiphy->bands[NL80211_BAND_5GHZ];
> -       if (band)
> +       if (band) {
> +               memcpy(band->channels, &__wl_5ghz_channels,
> +                      sizeof(__wl_5ghz_channels));
> +               band->n_channels = ARRAY_SIZE(__wl_5ghz_channels);
>                 for (i = 0; i < band->n_channels; i++)
>                         band->channels[i].flags = IEEE80211_CHAN_DISABLED;
> +       }
> @@ -7210,8 +7222,11 @@
>         band = wiphy->bands[NL80211_BAND_6GHZ];
> -       if (band)
> +       if (band) {
> +               memcpy(band->channels, &__wl_6ghz_channels,
> +                      sizeof(__wl_6ghz_channels));
> +               band->n_channels = ARRAY_SIZE(__wl_6ghz_channels);
>                 for (i = 0; i < band->n_channels; i++)
>                         band->channels[i].flags = IEEE80211_CHAN_DISABLED;
> -
> +       }
>         total = le32_to_cpu(list->count);
>         if (total > BRCMF_MAX_CHANSPEC_LIST) {
>                 bphy_err(drvr, "Invalid count of channel Spec. (%u)\n",
> @@ -8601,9 +8616,17 @@ static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy,
>         }
>
>         err = brcmf_translate_country_code(ifp->drvr, req->alpha2, &ccreq);
> -       if (err)
> -               return;
> -
> +       if (err) {
> +               /* Because we ignore the default country code above,
> +                * we will start out in our custom reg domain, but the chip
> +                * may already be set to the right country.
> +                * As such, we force the bands to be re-set the first
> +                * time we try to set a country for real.
> +                */
> +               if (err != -EAGAIN || !cfg->force_band_setup)
> +                       return;
> +       }
> +       cfg->force_band_setup = false;
>         err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
>         if (err) {
>                 bphy_err(drvr, "Firmware rejected country setting\n");
> @@ -8670,6 +8693,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
>         cfg->pub = drvr;
>         init_vif_event(&cfg->vif_event);
>         INIT_LIST_HEAD(&cfg->vif_list);
> +       cfg->force_band_setup = true;
>
>         vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION);
>         if (IS_ERR(vif))
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
> index 0e1fa3f0dea2..7e60ceeeeb3a 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
> @@ -327,6 +327,7 @@ struct brcmf_cfg80211_wowl {
>   * @dongle_up: indicate whether dongle up or not.
>   * @roam_on: on/off switch for dongle self-roaming.
>   * @scan_tried: indicates if first scan attempted.
> + * @force_band_setup: indicates if we should force band setup
>   * @dcmd_buf: dcmd buffer.
>   * @extra_buf: mainly to grab assoc information.
>   * @debugfsdir: debugfs folder for this device.
> @@ -357,6 +358,7 @@ struct brcmf_cfg80211_info {
>         bool pwr_save;
>         bool dongle_up;
>         bool scan_tried;
> +       bool force_band_setup;
>         u8 *dcmd_buf;
>         u8 *extra_buf;
>         struct dentry *debugfsdir;
> --
> 2.41.0
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ