lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZTQZr9QocS+Qls0P@ninjato>
Date:   Sat, 21 Oct 2023 20:34:23 +0200
From:   Wolfram Sang <wsa@...nel.org>
To:     Alain Volmat <alain.volmat@...s.st.com>
Cc:     Pierre-Yves MORDRET <pierre-yves.mordret@...s.st.com>,
        Andi Shyti <andi.shyti@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        M'boumba Cedric Madianga <cedric.madianga@...il.com>,
        stable@...r.kernel.org,
        Pierre-Yves MORDRET <pierre-yves.mordret@...com>,
        linux-i2c@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] i2c: stm32f7: Fix PEC handling in case of SMBUS
 transfers

On Tue, Oct 10, 2023 at 10:44:54AM +0200, Alain Volmat wrote:
> In case of SMBUS byte read with PEC enabled, the whole transfer
> is split into two commands.  A first write command, followed by
> a read command.  The write command does not have any PEC byte
> and a PEC byte is appended at the end of the read command.
> (cf Read byte protocol with PEC in SMBUS specification)
> 
> Within the STM32 I2C controller, handling (either sending
> or receiving) of the PEC byte is done via the PECBYTE bit in
> register CR2.
> 
> Currently, the PECBYTE is set at the beginning of a transfer,
> which lead to sending a PEC byte at the end of the write command
> (hence losing the real last byte), and also does not check the
> PEC byte received during the read command.
> 
> This patch corrects the function stm32f7_i2c_smbus_xfer_msg
> in order to only set the PECBYTE during the read command.
> 
> Fixes: 9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support")
> Signed-off-by: Alain Volmat <alain.volmat@...s.st.com>
> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@...s.st.com>

Applied to for-current, thanks!

BTW, there are some patches pending from this series for stm32f4/7. Do
you have time for an ack?

http://patchwork.ozlabs.org/project/linux-i2c/list/?series=359230


Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ