[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231023211028.3a4613df@xps-13>
Date: Mon, 23 Oct 2023 21:10:28 +0200
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Frank Li <Frank.Li@....com>
Cc: alexandre.belloni@...tlin.com, conor.culhane@...vaco.com,
imx@...ts.linux.dev, joe@...ches.com,
linux-i3c@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 6/6] i3c: master: svc: fix random hot join failure
since timeout error
Hi Frank,
Frank.Li@....com wrote on Mon, 23 Oct 2023 12:16:58 -0400:
> master side report:
> silvaco-i3c-master 44330000.i3c-master: Error condition: MSTATUS 0x020090c7, MERRWARN 0x00100000
>
> BIT 20: TIMEOUT error
> The module has stalled too long in a frame. This happens when:
> - The TX FIFO or RX FIFO is not handled and the bus is stuck in the
> middle of a message,
> - No STOP was issued and between messages,
> - IBI manual is used and no decision was made.
> The maximum stall period is 100 μs.
>
> This can be considered as being just a warning as the system IRQ latency
> can easily be greater than 100us.
>
> Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
> Cc: stable@...r.kernel.org
> Signed-off-by: Frank Li <Frank.Li@....com>
Reviewed-by: Miquel Raynal <miquel.raynal@...tlin.com>
Thanks,
Miquèl
Powered by blists - more mailing lists