| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Oct 2023 10:04:09 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Jyan Chou <jyanchou@...ltek.com>, adrian.hunter@...el.com,
jh80.chung@...sung.com, ulf.hansson@...aro.org
Cc: riteshh@...eaurora.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
asutoshd@...eaurora.org, p.zabel@...gutronix.de,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, arnd@...db.de,
briannorris@...omium.org, doug@...morgal.com,
tonyhuang.sunplus@...il.com, abel.vesa@...aro.org,
william.qiu@...rfivetech.com
Subject: Re: [PATCH V3][3/4] mmc: Add dw mobile mmc cmdq rtk driver
On 20/10/2023 05:49, Jyan Chou wrote:
> Add Realtek mmc driver to make good use Synopsys
> DesignWare mmc cmdq host driver.
>
> Signed-off-by: Jyan Chou <jyanchou@...ltek.com>
>
> ---
> +static int dw_mci_rtk_init(struct dw_mci *host)
> +{
> + struct dw_mci_rtkemmc_host *priv = host->priv;
> +
> + host->pdata->caps2 = MMC_CAP2_NO_SDIO | MMC_CAP2_NO_SD;
> +
> + if (priv->emmc_mode >= 2)
> + host->pdata->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
> + if (priv->emmc_mode >= 3) {
> + host->pdata->caps |= MMC_CAP_1_8V_DDR;
> + host->pdata->caps2 |= MMC_CAP2_HS400_1_8V;
> + }
> +
> + if (priv->is_cqe > 0)
> + host->pdata->caps2 |= (MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD);
> +
> + /*In Realtek Platform, only using 32bit DMA*/
Use Linux coding style. This driver looks like one for staging, not
ready for submission. :/
> + host->dma_64bit_address = 0;
> +
> + /*In Realtek Platform, do not use PIO mode by default*/
> + host->use_dma = TRANS_MODE_DMA;
> +
> + host->irq_flags = IRQF_SHARED;
> +
> + mcq_writel(host, CP, 0x0);
> +
> + /*Enable L4 gated*/
> + mcq_writel(host, OTHER1, mcq_readl(host, OTHER1) &
> + ~(SDMMC_L4_GATED_DIS | SDMMC_L4_GATED_DIS1));
> +
> + mcq_writel(host, OTHER1, mcq_readl(host, OTHER1) &
> + (~(SDMMC_DQS_CTRL_GATE_DIS | SDMMC_DBUS_MAS_GATING_DIS)));
> +
> + /*Set the eMMC wrapper little Endian*/
> + mcq_writel(host, AHB, mcq_readl(host, AHB) | SDMMC_AHB_BIG);
> +
> + mcq_writel(host, OTHER1,
> + mcq_readl(host, OTHER1) | SDMMC_STARK_CARD_STOP_ENABLE);
> +
> + /*set eMMC instead of nand*/
> + regmap_update_bits_base(priv->m2tmx, SDMMC_NAND_DMA_SEL,
> + SDMMC_SRAM_DMA_SEL, SDMMC_SRAM_DMA_SEL, NULL, false, true);
> +
> + /*Set the clk initial phase*/
> + dw_mci_rtk_phase_tuning(host, 0, 0);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int dw_mci_rtk_suspend(struct device *dev)
> +{
> + struct dw_mci *host = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + ret = dw_mci_cqe_runtime_suspend(dev);
> +
> + mcq_writel(host, AHB, 0);
> + dev_info(dev, "AHB=0x%x, dw_mci_cqe_suspend ret=%d\n",
> + mcq_readl(host, AHB), ret);
Drop useless success/function entry/exit messages..
> +
> + return ret;
> +}
> +
> +static int dw_mci_rtk_resume(struct device *dev)
> +{
> + struct dw_mci *host = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + mcq_writel(host, AHB, mcq_readl(host, AHB) | SDMMC_AHB_BIG);
> +
> + ret = dw_mci_cqe_runtime_resume(dev);
> +
> + dev_info(dev, "AHB=0x%x, dw_mci_cqe_resume ret=%d\n",
> + mcq_readl(host, AHB), ret);
Drop useless success/function entry/exit messages..
> +
> + return ret;
> +}
> +#else
> +static int dw_mci_rtk_suspend(struct device *dev)
> +{
> + dev_err(dev, "User should enable CONFIG_PM kernel config\n");
Why? This is not an error. If it were, then it should be build stage error.
> +
> + return 0;
> +}
> +
> +static int dw_mci_rtk_resume(struct device *dev)
> +{
> + dev_err(dev, "User should enable CONFIG_PM kernel config\n");
> +
> + return 0;
> +}
> +#endif /*CONFIG_PM*/
> +static const struct dev_pm_ops rtk_dev_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(dw_mci_rtk_suspend,
> + dw_mci_rtk_resume)
> + SET_RUNTIME_PM_OPS(dw_mci_cqe_runtime_suspend,
> + dw_mci_cqe_runtime_resume,
> + NULL)
> +};
> +
> +static void dw_mci_rtk_shutdown(struct platform_device *pdev)
> +{
> + dev_info(&pdev->dev, "[eMMC] Shutdown\n");
> + dw_mci_cqe_runtime_resume(&pdev->dev);
> +}
> +
> +static unsigned long dw_mci_rtk_dwmmc_caps[1] = {
> + MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
> + MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
> + MMC_CAP_NONREMOVABLE | MMC_CAP_CMD23,
> +};
> +
> +static const struct dw_mci_drv_data rtk_drv_data = {
> + .caps = dw_mci_rtk_dwmmc_caps,
> + .num_caps = ARRAY_SIZE(dw_mci_rtk_dwmmc_caps),
> + .set_ios = dw_mci_rtk_set_ios,
> + .execute_tuning = dw_mci_rtk_execute_tuning,
> + .parse_dt = dw_mci_rtk_parse_dt,
> + .init = dw_mci_rtk_init,
> + .prepare_hs400_tuning = dw_mci_rtk_prepare_hs400_tuning,
> + .hs400_complete = dw_mci_rtk_hs400_complete,
> + .init_card = dw_mci_rtk_init_card,
> +};
> +
> +static const struct of_device_id dw_mci_rtk_match[] = {
> + { .compatible = "realtek,rtd-dw-cqe-emmc",
> + .data = &rtk_drv_data },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, dw_mci_rtk_match);
> +
> +int dw_mci_cqe_pltfm_register(struct platform_device *pdev,
> + const struct dw_mci_drv_data *drv_data)
> +{
> + struct dw_mci *host;
> + struct resource *regs;
> +
> + host = devm_kzalloc(&pdev->dev, sizeof(struct dw_mci), GFP_KERNEL);
> + if (!host)
> + return -ENOMEM;
> +
> + host->irq = platform_get_irq(pdev, 0);
> + if (host->irq < 0)
> + return host->irq;
> +
> + host->drv_data = drv_data;
> + host->pdev = pdev;
> + host->dev = &pdev->dev;
> + host->irq_flags = 0;
> + host->pdata = pdev->dev.platform_data;
> +
> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + host->regs = devm_ioremap_resource(&pdev->dev, regs);
> + if (IS_ERR(host->regs))
> + return PTR_ERR(host->regs);
> +
> + /* Get registers' physical base address */
> + host->phy_regs = regs->start;
> +
> + platform_set_drvdata(pdev, host);
> +
> + return dw_mci_cqe_probe(host);
> +}
> +
> +static int dw_mci_rtk_probe(struct platform_device *pdev)
> +{
> + const struct dw_mci_drv_data *drv_data;
> + const struct of_device_id *match;
> +
> + if (!pdev->dev.of_node)
> + return -ENODEV;
> +
> + match = of_match_node(dw_mci_rtk_match, pdev->dev.of_node);
> + drv_data = match->data;
> +
> + return dw_mci_cqe_pltfm_register(pdev, drv_data);
> +}
> +
> +int dw_mci_rtk_remove(struct platform_device *pdev)
> +{
> + struct dw_mci *host = platform_get_drvdata(pdev);
> +
> + dw_mci_cqe_remove(host);
> + return 0;
> +}
> +
> +static struct platform_driver dw_mci_rtk_pltfm_driver = {
> + .probe = dw_mci_rtk_probe,
> + .remove = dw_mci_rtk_remove,
> + .driver = {
> + .name = "dwmmc_cqe_rtk",
> + .of_match_table = dw_mci_rtk_match,
> + .pm = &rtk_dev_pm_ops,
> + },
> + .shutdown = dw_mci_rtk_shutdown,
> +};
> +
> +module_platform_driver(dw_mci_rtk_pltfm_driver);
> +
> +MODULE_AUTHOR("<jyanchou@...ltek.com>");
> +MODULE_DESCRIPTION(" Specific Driver Extension");
> +MODULE_ALIAS("platform:dwmmc_cqe_rtk");
You should not need MODULE_ALIAS() in normal cases. If you need it,
usually it means your device ID table is wrong.
Best regards,
Krzysztof
Powered by blists - more mailing lists