| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d028322f-ca9c-f18e-2a96-8c950a991a1a@linux.alibaba.com>
Date: Mon, 23 Oct 2023 19:37:10 +0800
From: Baolin Wang <baolin.wang@...ux.alibaba.com>
To: Huangzheng Lai <Huangzheng.Lai@...soc.com>,
Andi Shyti <andi.shyti@...nel.org>
Cc: Orson Zhai <orsonzhai@...il.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
huangzheng lai <laihuangzheng@...il.com>,
Xiongpeng Wu <xiongpeng.wu@...soc.com>
Subject: Re: [PATCH V2 4/7] i2c: sprd: Add I2C controller driver to support
dynamic switching of 400K/1M/3.4M frequency
On 10/23/2023 4:11 PM, Huangzheng Lai wrote:
> When I2C-slaves supporting different frequencies use the same I2C
> controller, the I2C controller usually only operates at lower frequencies.
> In order to improve the performance of I2C-slaves transmission supporting
> faster frequencies, we dynamically configure the I2C operating frequency
> based on the value of the input parameter msg ->flag.
I am not sure if this is suitable to expand the msg->flag. Andi, how do
you think? Thanks.
> Signed-off-by: Huangzheng Lai <Huangzheng.Lai@...soc.com>
> ---
> drivers/i2c/busses/i2c-sprd.c | 101 +++++++++++++++++++---------------
> 1 file changed, 57 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
> index dec627ef408c..f1f7fad42ecd 100644
> --- a/drivers/i2c/busses/i2c-sprd.c
> +++ b/drivers/i2c/busses/i2c-sprd.c
> @@ -75,7 +75,14 @@
> #define SPRD_I2C_PM_TIMEOUT 1000
> /* timeout (ms) for transfer message */
> #define I2C_XFER_TIMEOUT 1000
> -
> +/* dynamic modify clk_freq flag */
> +#define I2C_3M4_FLAG 0x0100
> +#define I2C_1M_FLAG 0x0080
> +#define I2C_400K_FLAG 0x0040
> +
> +#define I2C_FREQ_400K 400000
> +#define I2C_FREQ_1M 1000000
> +#define I2C_FREQ_3_4M 3400000
> /* SPRD i2c data structure */
> struct sprd_i2c {
> struct i2c_adapter adap;
> @@ -94,6 +101,49 @@ struct sprd_i2c {
> int err;
> };
>
> +static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq)
> +{
> + u32 apb_clk = i2c_dev->src_clk;
> + /*
> + * From I2C databook, the prescale calculation formula:
> + * prescale = freq_i2c / (4 * freq_scl) - 1;
> + */
> + u32 i2c_dvd = apb_clk / (4 * freq) - 1;
> + /*
> + * From I2C databook, the high period of SCL clock is recommended as
> + * 40% (2/5), and the low period of SCL clock is recommended as 60%
> + * (3/5), then the formula should be:
> + * high = (prescale * 2 * 2) / 5
> + * low = (prescale * 2 * 3) / 5
> + */
> + u32 high = ((i2c_dvd << 1) * 2) / 5;
> + u32 low = ((i2c_dvd << 1) * 3) / 5;
> + u32 div0 = I2C_ADDR_DVD0_CALC(high, low);
> + u32 div1 = I2C_ADDR_DVD1_CALC(high, low);
> +
> + writel(div0, i2c_dev->base + ADDR_DVD0);
> + writel(div1, i2c_dev->base + ADDR_DVD1);
> +
> + /* Start hold timing = hold time(us) * source clock */
> + switch (freq) {
> + case I2C_MAX_STANDARD_MODE_FREQ:
> + writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
> + break;
> + case I2C_MAX_FAST_MODE_FREQ:
> + writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
> + break;
> + case I2C_MAX_FAST_MODE_PLUS_FREQ:
> + writel((8 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
> + break;
> + case I2C_MAX_HIGH_SPEED_MODE_FREQ:
> + writel((8 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
> + break;
> + default:
> + dev_err(i2c_dev->dev, "Unsupported frequency: %d\n", freq);
> + break;
> + }
> +}
> +
> static void sprd_i2c_set_count(struct sprd_i2c *i2c_dev, u32 count)
> {
> writel(count, i2c_dev->base + I2C_COUNT);
> @@ -269,6 +319,12 @@ static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap,
> sprd_i2c_send_stop(i2c_dev, !!is_last_msg);
> }
>
> + if (msg->flags & I2C_400K_FLAG)
> + sprd_i2c_set_clk(i2c_dev, I2C_FREQ_400K);
> + else if (msg->flags & I2C_1M_FLAG)
> + sprd_i2c_set_clk(i2c_dev, I2C_FREQ_1M);
> + else if (msg->flags & I2C_3M4_FLAG)
> + sprd_i2c_set_clk(i2c_dev, I2C_FREQ_3_4M);
> /*
> * We should enable rx fifo full interrupt to get data when receiving
> * full data.
> @@ -331,49 +387,6 @@ static const struct i2c_algorithm sprd_i2c_algo = {
> .functionality = sprd_i2c_func,
> };
>
> -static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq)
> -{
> - u32 apb_clk = i2c_dev->src_clk;
> - /*
> - * From I2C databook, the prescale calculation formula:
> - * prescale = freq_i2c / (4 * freq_scl) - 1;
> - */
> - u32 i2c_dvd = apb_clk / (4 * freq) - 1;
> - /*
> - * From I2C databook, the high period of SCL clock is recommended as
> - * 40% (2/5), and the low period of SCL clock is recommended as 60%
> - * (3/5), then the formula should be:
> - * high = (prescale * 2 * 2) / 5
> - * low = (prescale * 2 * 3) / 5
> - */
> - u32 high = ((i2c_dvd << 1) * 2) / 5;
> - u32 low = ((i2c_dvd << 1) * 3) / 5;
> - u32 div0 = I2C_ADDR_DVD0_CALC(high, low);
> - u32 div1 = I2C_ADDR_DVD1_CALC(high, low);
> -
> - writel(div0, i2c_dev->base + ADDR_DVD0);
> - writel(div1, i2c_dev->base + ADDR_DVD1);
> -
> - /* Start hold timing = hold time(us) * source clock */
> - switch (freq) {
> - case I2C_MAX_STANDARD_MODE_FREQ:
> - writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
> - break;
> - case I2C_MAX_FAST_MODE_FREQ:
> - writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
> - break;
> - case I2C_MAX_FAST_MODE_PLUS_FREQ:
> - writel((8 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
> - break;
> - case I2C_MAX_HIGH_SPEED_MODE_FREQ:
> - writel((8 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
> - break;
> - default:
> - dev_err(i2c_dev->dev, "Unsupported frequency: %d\n", freq);
> - break;
> - }
> -}
> -
> static void sprd_i2c_enable(struct sprd_i2c *i2c_dev)
> {
> u32 tmp = I2C_DVD_OPT;
Powered by blists - more mailing lists