linux-kernel - [PATCH v2 1/3] iio: imu: adis: Use spi cs inactive delay

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231023140534.704312-2-ramona.gradinariu@analog.com>
Date:   Mon, 23 Oct 2023 17:05:32 +0300
From:   Ramona Gradinariu <ramona.gradinariu@...log.com>
To:     <jic23@...nel.org>, <nuno.sa@...log.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <linux-iio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>
CC:     Ramona Gradinariu <ramona.gradinariu@...log.com>
Subject: [PATCH v2 1/3] iio: imu: adis: Use spi cs inactive delay

A delay is needed each time the chip selected becomes inactive,
even after burst data readings are performed.
Currently, there is no delay added after a burst reading
and in case a new SPI transfer is performed before
the needed delay, the adis device becomes unresponsive until
reset.

This commit is adding the needed delay directly to the spi driver,
using the cs_inactive parameter, in case it is not set and is
removing the additional chip select change delay present in adis
APIs to remove the double delay.

Signed-off-by: Ramona Gradinariu <ramona.gradinariu@...log.com>
---
 drivers/iio/imu/adis.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index bc40240b29e2..495caf4ce87a 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -44,8 +44,6 @@ int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value,
 			.cs_change = 1,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
-			.cs_change_delay.value = adis->data->cs_change_delay,
-			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 2,
 			.bits_per_word = 8,
@@ -53,8 +51,6 @@ int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value,
 			.cs_change = 1,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
-			.cs_change_delay.value = adis->data->cs_change_delay,
-			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 4,
 			.bits_per_word = 8,
@@ -62,8 +58,6 @@ int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value,
 			.cs_change = 1,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
-			.cs_change_delay.value = adis->data->cs_change_delay,
-			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 6,
 			.bits_per_word = 8,
@@ -144,8 +138,6 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val,
 			.cs_change = 1,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
-			.cs_change_delay.value = adis->data->cs_change_delay,
-			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 2,
 			.bits_per_word = 8,
@@ -153,8 +145,6 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val,
 			.cs_change = 1,
 			.delay.value = adis->data->read_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
-			.cs_change_delay.value = adis->data->cs_change_delay,
-			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 4,
 			.rx_buf = adis->rx,
@@ -163,8 +153,6 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val,
 			.cs_change = 1,
 			.delay.value = adis->data->read_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
-			.cs_change_delay.value = adis->data->cs_change_delay,
-			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.rx_buf = adis->rx + 2,
 			.bits_per_word = 8,
@@ -524,6 +512,12 @@ int adis_init(struct adis *adis, struct iio_dev *indio_dev,
 	}
 
 	mutex_init(&adis->state_lock);
+
+	if (!spi->cs_inactive.value) {
+		spi->cs_inactive.value = data->cs_change_delay;
+		spi->cs_inactive.unit = SPI_DELAY_UNIT_USECS;
+	}
+
 	adis->spi = spi;
 	adis->data = data;
 	iio_device_set_drvdata(indio_dev, adis);
-- 
2.34.1